OPT
FM
BT
TV
DVD
AUX
DB
C
PLEASE READ INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE
MODEL:SBS-32Z4
USB
--INSTALLATION AND OPERATION MANUAL--
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS.........................................................2-3
GENERAL VIEW.................................................................................................5
SPECIFICATIONS............................................................................................16
TROUBLESHOOTING GUIDE......................................................................... 15
USB...................................................................................................................14
AUX IN...............................................................................................................14
CONNECT TO TV/DVD.....................................................................................13
CONNECT USING OPTICAL............................................................................12
LISTEN TO FM RADIO.....................................................................................10
BLUETOOTH PAIRING AND PLAYBACK........................................................10
SPEAKER/POWER WIRE SOCKET DIAGRAM................................................6
PLACING AND MOUNTING...............................................................................4
PACKING LIST....................................................................................................1
INTRODUCTION.................................................................................................1
FEATURES..........................................................................................................1
REMOTE CONTROL..........................................................................................7
GENERAL OPERATIONS..................................................................................9
ADDING OPTIONAL EXTERNAL SUBWOOFER.............................................11
BATTERY INSTALLATION--REMOTE CONTROL............................................8
Features of the Connexx SBS-32Z4 soundbar stereo include:
Digital FM tuner w/10 presets
Bluetooth wireless technology
Built-in subwoofer (w/optional external subwoofer as an add-on accessory)
4 zone audio distribution
4 zone video distribution
3.5 mm aux input jack on front panel
USB input on front panel w/device charging capabilities
Digital Optical input on rear panel
2 analog stereo inputs on rear panel
LED backlit controls
Wireless remote control included
Thank you for choosing a Connexx product. We hope you will find the Instructions
in this owner's manual clear and easy to follow. If you take a few minutes to
review, you will learn how to use all of
the features of your new soundbar stereo
for maximum enjoyment.
User Manual
AV Connection Cable
Wall Mounting Brackets
FM Antenna
Remote Control with Two Batteries
Wire Harness for Speakers
OPT
FM
BT
TV
DVD
AUX
DB
C
USB
OPTICAL
BT
USB
FM
TV
DVD
VOL-
VOL+
AUX IN
PAIR
MUTE
/
/
/
ZONE A
POWER
TUN-
TUN+
ZONE B
ZONE C
ZONE D
OPT
FM
BT
TV
DVD
AUX
DB
C
PLEASE READ INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE
MODEL:SBS-32Z4
USB
--INSTALLATION AND OPERATION MANUAL--
Main Unit
1
DC Power Extension (Red and Black) Wire
AAA
AAA
INTRODUCTION
FEATURES
PACKING LIST
This unit has a long cord that can easily be tripped on or pulled on, causing injury, Please make sure
USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORDUSE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD
The lighting flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
it is arranged so it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped
over accidentally.
CAUTION: T O RE D U C E TH E RI S K O F
ELECTRIC SH O C K , DO NO T RE M O V E
COVER (OR BACK). NO USERSER V I CEABLE PAR T S INSID E . REFER
SE R V I C ING TO QU ALI F I E D SE R V I C E
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
FCC NOTICE:
This equipment has been tested and found
to comply with the limits for a Class B digital
devic e , pu r s uant to pa r t 15 of th e FC C
Rules. These limits are designed to provide
re a so n abl e p r ot e c ti o n ag ain s t ha rm f ul
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not Installed
and used in accordance with the instructions,
may cause ha r m ful inter f e r ence to ra d i o
communications.
● Re o rie n t o r re l oca t e t h e r e c ei v i ng
antenna. Increase the separation between
the equipment and receiver.
● Connect the equipment into an outlet
with a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced
radio/TV technician for help.
Before us ing the un it, be s ure to r ead all
operating instructions carefully. Please note
that these are general precautions and may
not pertain to your unit.
1 ) Read these instructions
All the safety and operating instructions should
be read before the product is operated.
2 ) Keep these instructions
The safety and operating instructions should
be retained for future reference.
3 ) Heed all warnings
All wa r ning s on the pr o d uct an d in the
operating instructions should be adhered to.
4 ) Follow all instructions
All operating and use instructions should be
followed.
5 ) Do not use this apparatus near water
Do not use this product near water and
moi s t ure, fo r exa m p le: ne a r a b a t htub ,
washbowl, kitchen sink or laundry tub; in a wet
basement; or near a swimming pool.
WARNING:
TO R ED UC E TH E RI S K O F FI R E OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING:
TO R ED UC E TH E RI S K O F FI R E OR
E L E CT R I C S H O C K , A N D AN N O Y I N G
INTERFERENCE, USE THE RECOMMENDED
ACCESSORIES ONLY.
FCC WARNING:
To assure continued compliance, follow the
attached installation instructions and use only
shielded cables when connecting to other
devices. Modifications not authorized by the
manufacturer may void user`s authority to
operate this device.
2
However, there is no
guarantee that
interference will not occur
in a particular
installation. If this equipment
does cause
harmful interference to radio
or
television
reception,
which can be determined by
turning the equipment off and
on,
the user is
encouraged to try to correct the
interference by
one or more of the following
measures:
8 ) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus(including amplifiers) that produce
heat.
9 ) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug
has two blades with one wider than other.
A grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 ) Protect the power cord from being
walked on or pinched particularly at plugs,
convenience
the apparatus.
13 ) Refer all servicing to qualified service
pers onnel. Servicing is requir ed wh en th e
apparatus
apparatus, the apparatus has been exposed to
rain or moisture does not operate normally, or
has been dropped.
14 ) Power source
This product should be operated only from the
type of power source indicated on the marking
label.
refer to the operation instructions.
15 ) Service
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Ref e r all se rvi c i n g to qu ali f i e d se r v ice
personnel.
6 ) Clean only with dry cloth
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
7 ) D o n o t b l o c k a n y v e n t i l a t i o n
openings. Install in accordance with the
manufacturer's instructions
Slots and openings in the cabinet and in the
back or bottom are provided for ventilation, to
ensure reliable operation of the product and
to protect it from overheating. These openings
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug or other similar surface.
This product should never be placed near or
over a radiator or heat source. This product
should not be placed in a built-in installation
such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.
receptacles, and the point where
they exit from
has been damaged in any way, such
as power-
supply cord or plug is damaged,
liquid
has
the been objects have fallen into or spilled
3
WARNING:
To reduce the risk of fire or electric shock, do
or splashing
and that objects
vases shall not be placed on
apparatus.
11 ) Only us e at t a ch ments/ a c c e ss ories
specied by the manufacturer.
12 ) Unplug this apparatus during lightning
storms or when unused for long periods of
time
To protect your product from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system.
lightning and power-line surges.
This will prevent damage to the product
due to
not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping
filled with liquids,
such as
WARNING:WARNING:WARNING:
supply
dealer or
to your home, consult your appliance
If you are not sure of the type of power
local power company. For products
intended
to operate from battery power, or other
source,
2. Mounting the Sound Bar onto a wall
We recommend having this Sound Bar professionally mounted. By using the included
wall mounting accessories, the Sound Bar can be mounted onto a wall.
Distance between two brackets
1. Placing on the table
When placing the Sound Bar on an entertainment center, bookshelf, or any type of
oduce a potential heat hazard.
10A FUSE
24.6 inches
PLACING AND MOUNTING
space around the Sound Bar
for ventilation.
If the Sound Bar is enclosed in a tight space, without ventilation, heat
generated from
the Sound Bar could pr
4
enclosed space, be sure to allow
GENERAL VIEW
OPT
FM
BT
TV
DVD
AUX
DB
C
10A FUSE
10A FUS E
Front View
Rear View
OPI
FM
BT
TV
DVD
AUX
DB
C
2
3
4
5
6
7
8
9
1
10
12
1. LED Display
2. AUX IN Jack
3. USB Jack
6. Volume Down
10. PAIR Button
11. SOURCE Button
12. Remote Sensor
13. ZONE A/B/C/D Button
8. NEXT/TUNE Up
9. Volume Up
1.TV Audio In Jack
2.DVD Audio In Jack
3.VIDEO Out Jack x 4
4.VIDEO In Jack
5.Subwoofer Switch
6.External Subwoofer Connector
7.Optical In Power Jack
8.Speaker/Power Wire Socket
1
2
3
4
5
6
7
8
USB
4. POWER Button
5. PREVIOUS/TUNE Down
11
7. Play/Pause/ Preset/
Memory/Preset Play Button
5
13
SPEAKER/POWER WIRE SOCKET DIAGRAM
10A FU SE
12V DC
Power
Extension
RED - POWER IN 12V +
10A FUSE
BLACK - POWER GND
RED - POWER IN 12V +
BLACK - POWER GND
WHITE - B LEFT +
BLUE/BLACK - D RIGHT -
10A FUSE
WHITE/BLACK - B LEFT -
BLUE - D RIGHT +
GRAY - B RIGHT +
ORANGE/BLACK - D LEFT -
GRAY/BLACK - B RIGHT -
ORANGE - D LEFT +
VIOLET/BLACK - C RIGHT -
GREEN - C LEFT +
VIOLET - C RIGHT +
GREEN/BLACK - C LEFT -
SPEAKER (6X4-ohms) WIRING COLOR CODE GUIDE
CAUTION!
Connecting the speakers
incorrectly will cause distortion
and damage the power
amplifier.
6
8
7
6
5
4
1
2
3
1. POWER button
5. TUNE - / /TUNE+ button
6. VOL ( Volume )+/- buttons
4. TV Mode Switch button
8. OPTICAL Mode Switch button
REMOTE CONTROL
OPTICAL
BT
USB
FM
TV
DVD
VOL-
VOL+
AUX IN
PAIR
MUTE
/
/
/
ZONE A
POWER
TUN-
TUN+
ZONE B
ZONE C
ZONE D
1
2
3
9
10
11
12
13
14
15
16
17
2. Bluetooth Mode Switch button
3. AUX IN Mode Switch button
9. USB Mode Switch button
10. ZONE A button
11. ZONE B button
12. ZONE C button
13. ZONE D button
14. FM Mode Switch button
15. DVD Mode Switch button
16. MUTE button
17. PAIR button
7. ( Play/Pause )/ ( Memory/
Preset /Preset Play )button
7
BATTERY INSTALLATION--- REMOTE CONTROL
Battery Installation
Remote Control Effective Range
control of the unit, the remote control may not operate properly.
When there is an obstacle between the unit and the remote control, the remote control may
not operate properly.
When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light
shines on the remote
Battery Precaution
1.Slide and lift the battery door (Figure 1).
2.Install 2 (two) AAA size batteries into the battery compartment as indicated
by the polarity markings (Figure 2).
3.Replace the battery door (Figure 3).
8
3. During Playback:
~ Press the VOL (Volume)-/+ buttons to adjust volume level as desired.
GENERAL OPERATIONS
1. Press the Power button on the unit or remote control to power on the unit from standby mode.
Follows the order below:
2. The default mode is "FM". Press the SOURCE button repeatedly to switch to desired mode.
4. When finished listening, press the Power button to power off the unit.
5. If the unit is not used for long period of time, please disconnect power.
OPT
FM
BT
TV
DVD
AUX
~ Press ZONE B, ZONE C or ZONE D button on the Remote Control or on front
panel to switch ON or OFF the corresponding ZONE B/C/D speakers.
USB
~ Press ZONE A button
on the Remote Control or on front panel of the
speakers.
9
sound bar to switch
ON or OFF the soundbar
~ Press Mute button on the Remote Control to mute the sound on all active zones.
Press again to resume.
FM Antenna
2. Press the SOURCE button repeatedly until FM appears on the display.
3. Press and hold the /TUNE - or /TUNE + buttons and then release,
The antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and
extend the wire or relocate the wire to improve the radio reception.
LISTEN TO FM RADIO
BLUETOOTH PAIRING AND PLAYBACK
3. Turn on the external BT Device and enter BT searching mode. Start
to the user's manual of your BT Device. )
Notes:
display of the external BT Device.
Pairing code "0000" may need to be entered.
Normal operation after paired:
pairing as the screen
instructions on the external BT Player.
( For details pairing procedures, please refer
BT ( Bluetooth ):
2. Press the SOURCE button repeatedly until "BT" appears on display.
~
~
Pairing the unit to external BT Device as follows:
Normal operation after paired:
The unit will start to search next ( or previous )
available FM radio station then plays.
5. Press button on remote control to play the preset stored station.
location(such as Pxx.), then press
button to change the storage lacation, press and
A total of 10 stations can be stored into the unit's memory.
hold the button to complete station storage.
When the external BT Device searched the unit, will appear on the
--Press the VOL (Volume)-/+ buttons to adjust volume level as desired.
/
/
/
4. When a station searched, press and hold the button to display the desired storage
/
"SBS-32Z4"
BT ( Bluetooth ):
Pairing the unit to external BT Device as follows:Pairing the unit to external BT Device as follows:
10
1. Power ON the unit.
Or press FM on Remote Control.
1. Power ON the unit.
Or press BT on Remote Control.
10A FUSE
ADDING OPTIONAL EXTERNAL SUBWOOFER
+
-
There is a SPEAKER SELECTOR on the back of the unit to turn on or turn off the internal subwoofer
output or external subwoofer output.
IN(Internal subwoofer)-- When the switch is moved to "IN" position, there will be no audio output
from the external subwoofer.
EX(External subwoofer)- When the switch is moved to "EX"
position, there will be no audio output
from the internal subwoofer.
NOTE: Before connecting, disconnect power.
1. Connect one end of subwoofer connection cable ( not supplied ) to the "+" Jack on the rear
of the unit as the figure above.
2. Connect the other end to the "-" Jack on the rear of the unit as the figure above.
3. Slide the selector to "EX" position as figure above.
5. Play the music as usual and set the desired volume.
11
4. Power ON the unit.
CONNECT USING OPTICAL
3. Power ON the unit.
1. Connect one end of optical connection cable ( not supplied ) to the optical jack on the rear
of the unit as pictured above.
2. Connect the other end to the DVD or TV back panel.
4. Press the SOURCE button repeatedly until the "OPT" appears on display.
10A FUSE
NOTE: Before connecting, disconnect power.
DVD or TV
Optical Cable(Not Supplied)
5. Play the music as usual and set the desired volume.
12
Or press OPTICAL on Remote Control.
NOTE:
If there is no audio output (only picture) when your TV or DVD player is connected
to the soundbar, please check DVD audio setting, and set the digital output to PCM format.
DVD or TV
CONNECT TO TV/DVD
10A FUSE
NOTE: Before connecting, disconnect power.
Yellow
White
Red
Yellow
White
Red
Yellow
Yellow
Yellow
1. Connect as the figure above.(TV 2, 3, 4 are optional to connect)
5. Play the audio or video as usual and set the desired volume.
3. Press the SOURCE button repeatedly until "TV" appears on display.
TV 2
TV audio is selected and will play through the unit.
4. Press the SOURCE button repeatedly until "DVD" appears on display.
DVD audio is selected and will play through the unit.
TV 3
TV 4
MAIN TV
13
2. Power ON the unit.
Or press TV on Remote Control.
Or press DVD on Remote Control.
NOTE: Before connecting, disconnect power.
4. Press the SOURCE button repeatedly until "AUX" appears on display.
1. Connect one end of audio connection cable (not supplied) to the AUX IN jack on the front of the
2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such as
iPod, iPhone, iPad, MP3 player, Discman... etc. )
5. Play the music in the external player as usual and set the desired volume.
AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES
unit as pictured above.
OPI
FM
BT
TV
DVD
AUX
DB
C
OPI
FM
BT
TV
DVD
AUX
DB
C
USB : LISTEN TO EXTERNAL AUDIO DEVICES
USB
3. Insert the USB, then press the SOURCE button repeatedly until "USB" appears on screen.
4. Play the music in the external player as usual and set the desired volume.
1. Insert the USB as in the figure above.
~ Press button on the Remote Control to play or pause.
~ Press or button on the Remote Control to skip to next or previous track.
NOTE:
The USB port can also be used for charging.
14
Or press AUX IN on Remote Control.
3. Power ON the unit.
Or press USB on Remote Control.
2. Power ON the unit.
NOTE:NOTE:NOTE:
6<03720 3266,%/(&$86( 3266,%/(628/7,21
Reduce the bass level of the connected
device
Press the SOURCE button repeatedly to
set the input source to the desired mode
No power
No sound
Sound distortion
Remote not
working
Bluetooth
reception failure
Have not paired
consumed
The batteries are
The external device is too far
from the unit
Volume level too high
Bass level of the connected
device too high
Input source incorrect
The connected device is not
in playback mode
Volume in minimum position
power cable not connected
Raise volume level by pressing the VOL
(Volume) + button
Play the music/movie in the connected
device as usual
and make sure the
volume level of it is in high level
VOL (Volume ) - button
Reduce the volume level by pressing
the
Replace with new batteries
Move the external BT device closer to the
unit
Pair both units
TROUBLESHOOTING GUIDE
~Check 12V connection
15
~Check fuse
Check the following guide before requesting serviceCheck the following guide before requesting service
or blown fuse
z
Max Power Consumption...........................................................................................................90W
Radio Coverage ...............................................................................................FM 87.5 -108.0 MH
Bluetooth Effective Range.............................................................................................Up to 30 feet
Remote Effective Range................................................................................................Up to 15 feet
(Measured in open area. Wall and structures may affect the effective range.)
Power Supply Requirement................................................................DC 12 Volts, Negative Ground
Video In/Out Level...........................................................................1 Vp-p/Load impedance:75 ohm
16
Operation Voltage...........................................................................................................DC10V-14V
Overall Dimension..................................................................................813(W)x107.2(H)x83(D)mm
Device and Accessories Net Weight.............................................................................2.2kg(4.85 lb)
SPECIFICATIONS
Specifications subject to change without notice.
(1) The device may cause harmful interference. and
NOTE:
The device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions.
(2) This device must accept any interference received, including the interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY
TO OPERATE.
FCC WARNINGS:FCC WARNINGS:
NOTE:
www.riverparkinc.com
2014 RIVERPARK Inc.
V. 050514
C
Loading...