Connerton CHP-112-A User Manual
Model CHP-A
Budget Series
Fine Cooking Equipment For Over 70 Years
Hot Plate
Date: Project: Quantity:
15” & 27”
15” & 27”
Deep Models
Deep
Models
Stainless Steel Front Panel
Aluminized steel body
28,000 BTU Burners
Increased heat for faster cooking
Enclosed Back
Directs heat up and out, not out the back
Full Body - Replaces Legs
For high heat, extra stability and safety
The Connerton Company
1131 E. Wakeham Avenue, Santa Ana, CA 92705-4145
Telephone: (714) 547-9218 Fax: (714) 547-1969
www.connertoncompany.com
Model CHP-A Budget Series Hot Plates
27”
1-1/2”
15”
1-1/2”
10”
5-1/2”
Model Width Depth BTU Burners Wt. (Est)*
CHP-212-A 12” 27” 56,000 2 60
CHP-424-A 24” 27” 112,000 4 110
CHP-636-A 36” 27” 168,000 6 160
CHP-848-A 48” 27” 224,000 8 210
CHP-112-A 12” 15” 28,000 1 35
CHP-224-A 24” 15” 56,000 2 60
CHP-336-A 36” 15” 84,000 3 85
CHP-448-A 48” 15” 112,000 4 110
*Note: Weight estimates are uncrated
Product Specifications:
1-1/2”
4-3/4”
27”
Body:
Front:
Grate:
Burners:
Drip Pan:
Valves:
Gas Inlet:
Available Options:
o
o
o
Notes:
Gas Pressure Regulator is supplied and must be installed
Combustible locations: 8” Clearance sides and back
Non-Combustible Locations: 0” Clearance sides and back
Specify type of gas and altitude if over 2,000 feet
Connerton Company reserves the right, without notice, to make changes and revisions in product
specifications, materials and design, which in our opinion will provide better performance, durability and
efficiency.
Stainless Steel Plate Shelf (Custom Sized)
Stainless Steel Wok Adapter Ring
Lift-Off Griddle (12” & 24”)
18 Gauge Aluminized Steel, Riveted
Removable 18 Gauge #304 Stainless Steel Panel
Heavy Duty Painted Cast Iron w/ “Center-Slope” Hole
28,000 BTU Heavy Duty Painted Cast Iron
18 Gauge Aluminized Steel, Welded
Heavy Duty Brass
¾ NPT
The Connerton Company
Telephone: (714) 547-9218 Fax: (714) 547-1969
Loading...