Connects2 CTUSK02-AMP Instruction Manual

www.connects2.com

INSTRUCTION MANUAL

CTUSK02-AMP

INFODAPTER

www.connects2.com

2

ABOUT

The Connects2 Infodapter for Skoda MIB platform vehicles allows vehicle information
such as climate control, parking sensors and heated seats to be displayed on any
aftermarket head unit with rear camera input. The Infodapter also allows the use of the
steering wheel controls with almost every steering wheel control compatible head unit on

the market and also retains the OEM Canton amplier.

DIP SWITCH SETTINGS

See Fig 1.

Up = Off, Down = On

1: On = Pioneer head units. Off = All other head units

2: Setting for reverse camera. On = PAL, Off = NTSC. The default setting is Off (NTSC).

3: Resets the display settings back to default. If the display settings have been

manipulated in a way that it is no longer possible to make adjustments, change the
DIP switch #3 from Off to On and back. This will reset the screen settings to the factory
defaults. During this procedure the screen background will change to red. While the
background is red, no settings can be made.

4: Not applicable. (This should be kept in the Up/Off position)

Interface Connections

Fig 1.

1 234
DIP ON

Reverse Camera output
to head unit and reverse
camera input from
optional camera

Power Harness Steering Wheel

Remote control
connector to
head unit

Dip Switches

Not Used

Aftermarket Head Unit

Reverse Camera Input

Reverse Camera
(Optional)

To Car Connector
(SKODA MULTIMEDIA

Speaker Level In

Steering Wheel
Control Input

Infodapter Interface

Amp Retention

Interface

From MOST Audio Fibre Cable

(SKODA MULTIMEDIA)

MOST Audio Out

(Remove Grey

Protective Cover)

Park Brake (Green)

Amp Remote (Blue)
Mute (Grey)

Speed Pulse (Pink)

Reverse (Purple)

To Fascia Panel Buttons (See Fig.3)

SKODA MULTIMEDIA