Connects2 CTUFT02 Instruction Manual

CTUFT02

FIAT INFODAPTER

INSTRUCTION MANUAL

www.connects2.com

ABOUT

1 234
DIP ON

The Connects2 Infodapter for Fiat 500X 2015> vehicles allows vehicle setting and parking
sensor information to be displayed on any aftermarket head unit with rear camera input.
The Infodapter also allows the use of the steering wheel controls with almost every
steering wheel control compatible head unit on the market.

DIP SWITCH SETTINGS

See Fig 1.

Up = Off, Down = On

1: On = Pioneer head units. Off = All other head units

2: Setting for reverse camera. On = PAL, Off = NTSC. The default setting is Off (NTSC).

3: Resets the display settings back to default. If the display settings have been

manipulated in a way that it is no longer possible to make adjustments, change the
DIP switch #3 from Off to On and back. This will reset the screen settings to the factory
defaults. During this procedure the screen background will change to red. While the
background is red, no settings can be made.

4: Not applicable

Interface Connections

Fig 1.

Reverse Camera output
to head unit and reverse
camera input from
optional camera

Reverse camera

10

(optional)

È

2

To car connector

Power Harness Steering Wheel

Ã

Speed Pulse (Pink)

Ç

Å

www.connects2.com

Remote control
connector to
head unit

À

Aftermarket head

Reverse Camera Input

ISO

Ä

Connector

Mute(Grey)

Æ

Reverse (Purple)

Dip Switches

Â

Steering Wheel
Control Input

Not Used

Á

Fig 2.

Infodapter