Connects2 CT53-PO05 Installation Manual

CT53-PO05

Active System Adapter

for Porsche Vehicles

i

i. Amp Retention Interface
ii. Male RCA Connectors
iii. Flying Wires

APPLICATION

vi

ii

iii iv

iv. Male ISO Connector
v. Quadlock Connector
vi. Interface Box

Note: Application data is subject to change at any time

v

Porsche 911 (997) 2004 - 2008

For ber-amplied vehicles with MOST 25 systems and quadlock connectors.

FEATURES

• Retains MOST 25 Fiber Amplied System

• Provides Outputs for Park Brake, Reverse Gear, Speed Pulse & Amp Remote

The information provided in this document is subject to change without notice due to manufacturer changes and/or improvements to the product/s. This

instruction manual is based on documented data and research. The manufacturer of this product cannot be held responsible for any changes made to the

vehicle by the manufacturer or damages that may occur through the installation of this product in accordance with the steps outlined herein.

DISCLAIMER

CT53-PO05_V1

PRIOR TO INSTALLATION

Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation
must be free of moisture and away from heat sources. Please ensure that the correct tools are using during the
installation to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation
of this product.

Note: The aftermarket stereo being installed must have RCA connections in order for this product to
function correctly

WIRING KEY

IN MALE ISO CONNECTOR

Purple Right Rear Speaker +
Purple/Black Right Rear Speaker ­Green Left Rear Speaker +
Green/Black Left Rear Speaker ­Grey Right Front Speaker +
Grey/Black Right Front Speaker ­White Left Front Speaker +

White/Black Left Front Speaker -

ADDITIONAL CONNECTIONS

Pink Speed Pulse
Green Park Brake
Purple/White Reverse Gear
Blue/White Amp Remote

iv

iii

Yellow Permanent 12V
Black Ground
Red Ignition 12V
Orange Illumination

2

CT53-PO05_V1