Connects2 CAM-VW6-AD Installation Manual
CAM-VW6-AD
Rear Camera/AV Input Interface
Application:
Volkswagen Golf 2003>, Passat 2002>, Touareg 2002>,
Touran 2002>, T5 2003>
For Vehicles with MFD2/SRN Navigation Head Units
www.connects2.com
ABOUT THIS PRODUCT...
CAM-VW6-AD
Add On Reverse Camera Interface for OEM Systems allows the addition of an
aftermarket reverse camera to the OEM screen - for PAL and NTSC cameras.
Factory TV tuner and factory rear-view camera must not be installed.
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2
2
CONNECTION DIAGRAM/INSTALLATION
Installation
Interface Box
Harness
NB: Before installation, switch off ignition, disconnect the vehicle battery and
remove the vehicle’s head unit.
The interface is installed behind the vehicle’s head unit.
www.connects2.comwww.connects2.com
3
Loading...