Connects2 CAM-LR3-AD User Manual

www.connects2.com

CAM-LR3-AD

Rear View Camera-Input & Video-In-Motion

Application:

Land Rover Range Rover 2015 - 2016, Evoque 2015 - 2016

For Touch Screen Navigation Version 4.0 Head Units

without Meridian Sound System

2

ABOUT THIS PRODUCT...

CAM-LR3-AD

Rear View Camera-Input and Video-In-Motion for Land Rover Vehicles 2015> with
Touch-Screen Navigation Version 4. Add on Camera interface designed to allow
the addition of an aftermarket reverse camera to the OEM screen - compatible
with NTSC cameras only.

Prior to Installation

Read the manual prior to installation. Technical knowledge is necessary for installa­tion. The place of installation must be free of moisture and away from heat sources.
Please ensure you use the correct tools to avoid damage to the vehicle or product.

Connects2 can not be held responsible for the installation of this product.

Technical Support

Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: support.connects2.com

Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2

www.connects2.comwww.connects2.com

3

FITTING GUIDE/PIN-ASSIGNMENTS

Setting the Dip Switches of the Interface

Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
Video-in-motion permanent ON ON OFF OFF ON ON
Video-in-motion selective* OFF ON OFF OFF ON ON

* With Dip1 set to “OFF”, the included green cable is used to activate the video
in motion function

Dipswitch Functionality

Dip 1 – activation TV-free
Dip 2 – rear-view camera existing
Dip 3 – no function
Dip 4 – no function
Dip 5 – CAN-bus termination resistor on the vehicle side
Dip 6 – CAN-bus termination resistor on the head-unit side

Setting Dip2 to “ON” codes the factory rear-view camera input, which is
located on the blue double Fakra male connector of the head unit.
When reverse gear is engaged, the navigation will automatically switch to this
input.

Pin Conguration

Quadlock Connector:

Function Pin-No.
CAN-HIGH Pin 3 (chamber B)
CAN-LOW Pin 9 (chamber B)
+12V permanent Pin 13
Ground Pin 11