Connects2 CAM-LR1-AD User Manual

www.connects2.com

CAM-LR1-AD

Rear View Camera Input and Video In Motion

Application:

Land Rover Range Rover Vogue (L322) 2010 - 2012,

Range Rover Sport (L320) 2004 - 2013,

Discovery (L319) 2010 - 2011

For Touch Screen Navigation Version 2.0 Head Units

2

ABOUT THIS PRODUCT...

CAM-LR1-AD

Reverse Camera Add On Interface with Video In Motion. For Land Rover 2010 ­2011 vehicles with touch screen navigation systems. Add on Camera interface
designed to allow the addition of an aftermarket reverse camera to the OEM
screen - compatible with NTSC cameras only.

Prior to Installation

Read the manual prior to installation. Technical knowledge is necessary for installa­tion. The place of installation must be free of moisture and away from heat sources.
Please ensure you use the correct tools to avoid damage to the vehicle or product.

Connects2 can not be held responsible for the installation of this product.

Technical Support

Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.

Please use our dedicated online technical support centre: support.connects2.com

Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2

www.connects2.comwww.connects2.com

3

PIN-ASSIGNMENTS

Dipswitch Settings

Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
Video-in-motion permanent ON ON OFF OFF ON ON
Video-in-motion selective* OFF ON OFF OFF ON ON

* With Dip1 set to “OFF”, the included green cable can be used to activate the
video in motion function

Interface Dipswitch Functionality:
Dip 1 – Activation of Video in Motion
Dip 2 – Existing Rear View Camera
Dip 3 – TV icon simulation
Dip 4 – No function
Dip 5 – Termination resistor CAN-Bus
Dip 6 – Termination resistor CAN-Bus

Setting Dip2 to “ON” codes the factory rear-view camera input, located on
the brown Fakra male connector of the factory monitor. When reverse gear is
engaged, the navigation will automatically switch to this input.

Pin Conguration

Range Rover Vogue

Cable Colour Assignment
Yellow/White CAN-HIGH Pin 9
Yellow/Blue CAN-LOW Pin 10

Range Rover Sport/Discovery

Cable Colour Assignment
Yellow/White CAN-HIGH
Yellow CAN-LOW