Connects2 CAM-AU5-AD User Manual
www.connects2.com
CAM-AU5-AD
Reverse Camera Add On Interface
Application:
Audi A3 2004-2010, A4 2004-2010, TT 2004-2010
For Audi Navi Plus RNS-E Head Units with 6.5” Display (16:9)
Newer Piano Black. High Res Colour RNS-E Not Compatible
2
ABOUT THIS PRODUCT...
CAM-AU5-AD
Reverse Camera Add On Interface for Audi Vehicles with Audi Navi Plus RNS-E
(16:9). Add on camera interfaces allowing the addition of a reverse camera to
the vehicles OEM display. Designed for vehicles without factory TV tuner, head
unit must be coded for rear camera input and have a minium SW version of
550. Compatible with NTSC cameras only.
Only compatible with NTSC cameras.
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any
technical issues. With this in mind, when contacting Connects2, try to provide as
much Information as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2
www.connects2.comwww.connects2.com
3
CONNECTION DIAGRAM/INSTALLATION
Connection Diagram
Installation
NB: Before installation, switch off ignition, disconnect the vehicle battery and
remove the vehicle’s head unit.
Interface Box
Harness
Loading...