ConnectPRO UD12KIT, UD-112+, UD-18+, UD-14+, UD-12+ User Manual
...
TM
UD-12+ / UD-14+ / UD-16+ / UD-18+ / UD-112+
Master-IT USB Plus+ - Advanced USB DVI KVM switch w/ DDM & multi-hotkey
Installation Guide
Product View
UD-12+
UD-14+
UD-16+
UD-18+ & UD-112+
UD-12+ UD-14+
44 mm
( 1.73 inch )
165 mm ( 6.5 inch )
275 mm ( 10.83 inch )
UD-16+
UD-18+
UD-112+
440 mm ( 17.3 inch )
USB
( 1.73 inch )
( 1.73 inch )
( 1.73 inch )
44 mm
44 mm
44 mm
What is USB DDM
TM
USB Devices
USB Devices
PC
Hot-Key Command
1. Hot-key selection
Via front panel Hot-key select button
Touch-screen
wireless keyboard
and mouse
USB DDM port
1 2 3 4
KVM
100% device mapping
100% device mapping
100% device mapping
Touch-screen
wireless keyboard
and mouse
Via Hot-key control
Default Hot-key
Hot-key Hot-key
=
Ctrl
H
New Hot-key
2. Hot-key and functions
Joy stick
100% device mapping
Joy stick
Connect cables
1 2 3
Connect Power Adaptor
Special note:
If your device cannot work in rear console DDM ports properly, please connect it to the hub ports on
the front panel. The rear console ports can be connected with USB HID devices only.
Connect console
1. Monitor
2. Mouse
3. Keyboard
Connect KVM cable from
computer system to KVM
ports
Hot-key
Hot-key Hot-key
Hot-key Hot-key
Default buzzer sound off
Hot-key Hot-key
S
N
Hot-key
1
~
A
~
Turn switching confirmation
Z
buzzer sound on/off
=
S
N
last setting interval , default 5 seconds
= =
5
1
~
5, 8, 15, 20, 30 seconds
=
Turn off Auto Channel Scan by pressing any key
3. Assign USB port command
Hot-key Hot-key
Hot-key Hot-key
H
1
0 PH
8
Switch to Port #1 ( ~ Port #8 )
F
Switch to Port #A ( ~ Port #F )
Turn on Auto Channel Scan
P
1
~
0
,
8 A F
Default USB port setting
( Sync with KVM port selection )
~
Assign USB #1 for
a certain port use only
Front & Rear View
IR Remote Control Sensor
Push-button selection
Hot-key selection
5V DC in
Power input
DC 5V 2000 mA
Master-IT USB switches are
designed for effectively saving
energy.
Special note:
LED light will be quickly flashing while the KVM is mapping out the device.
+
MASTER IT USB-DVI KVM SWITCH w/
UD 14
/
-
Reset
1 2 3 4
Ctrl
Shift
Hot-Key
Select
Scroll
Lock
Caps
Lock
USB
2
Hot-key indicator
( both LEDs not lit = hot-key has been disabled )
USB device sharing port ( high speed USB 2.0 )
USB
USB
1
-
DVI I
-
DVI I
-
DVI I
-
DVI I
-
DVI I
USB 2.0 HID devices DDM console connections for mouse and keyboard
Serial port for extra control and firmware upgrade ( CRJ45-DB9F-5 serial cable )
DVI connection for LCD or CRT monitor
KVM ports for connecting systems
Port Selection
Press button to select port
for control
Use IR remote controller for
selecting port
( optional )
Type hot-key to select port
for control
Via RJ-45 serial port control commands issued from
communication application such
as Hyper Terminal.
Via Mouse-click switching An optional function only released
to OEM/ODM or special projects.
Features & Benefits
100% compatible with USB HID devices ( for USB DDM ports )
Compatible with Windows ( Windows 98, 2000, XP, Vista, Windows 7 ), Linux and Mac OS
Front panel push-button for easy computer selection
User selectable multi-hotkey ( Crtl, Shift, Scroll Lock, Caps Lock, Hotkey disable )
Backlit push-button with multi-color LED for easy monitoring and selection
Built-in IR remote receiver and selectable Hot-key control
Buzzer sound for computer switching confirmation
Plug-and-Play system configuration
Additional USB ports for device sharing, or assign to a certain port
No drivers needed for keyboard and mouse operation
RS-232 control and firmware upgradable
DVI interface, supports the DVI-I monitor
Max video resolution supported 1920 x 1200
Built-in All-time Full DDC ( Active - DDC to all connected systems )
3-year Warranty
Specification
Ordering Information
Functional
Computer port number
Panel button control
Button LED color indication
IR remote control
Hot plug-and-play
Hot key control
Auto scan
Selectable scan interval
Beep sound
Cable length
Resolution
Keyboard
System
connectors
Console
connectors
Total USB device
sharing port
Mechanical
Height
Width
Depth
Weight
Power
Operating voltage
Power frequency
Power consumption
Certification
& Mouse
Monitor
Keyboard
& Mouse
Monitor
UD-12+
2
2
USB B x 2
DVI-24+5
Female x 2
USB A ( USB 2.0 ) x 4
44 mm
( 1.73 inch )
165 mm
( 6.5 inch )
76 mm
( 2.99 inch )
530 g
( 1.17 lb )
6 W
UD-14+
4
4
PC On-Line - Green , Selected - Red , Both - Orange
Yes ( Built-in receiver, controller optional )
5, 8, 15, 20, 30 sec ( Hot key )
On / Off ( Hot key selectable )
5M ( 15ft ) at Console; 5M ( 15ft ) at PC
Max 1920 x 1200 , DDC1 / DDC2B
USB B x 4 USB B x 12
DVI-24+5
Female x 4
USB A x 2 ( DDM Technology )
44 mm
( 1.73 inch )
275 mm
( 10.83 inch )
131 mm
( 5.16 inch )
1150 g
( 2.54 lb )
7.5 W
UD-16+
6
6
Yes
Yes
Yes ( Hot key )
USB B x 6
DVI-24+5
Female x 6
DVI-24+5 Female x 1
USB A ( USB 2.0 ) x 3
44 mm
( 1.73 inch )
440 mm
( 17.3 inch )
131 mm
( 5.16 inch )
1620 g
( 3.57 lb )
DC 5V ( 2000 mA )
50-60 Hz
FCC, CE
UD-18+
8
8
USB B x 8
DVI-24+5
Female x 8
44 mm
( 1.73 inch )
440 mm
( 17.3 inch )
131 mm
( 5.16 inch )
1850 g
( 4.08 lb )
9 W 9.5 W8.5 W
UD-112+
12
12
DVI-24+5
Female x 12
44 mm
( 1.73 inch )
440 mm
( 17.3 inch )
131 mm
( 5.16 inch )
1860 g
( 4.1 lb )
Model
UD-12+
UD-14+
UD-16+
UD-18+
UD-112+
Optional part / accessory
Cables
SDU-06
SDU-10
SDU-15
CRJ45-DB9F-5
Power Adaptor
PAUS-DC5V2A
IR Remote Controller
RC-01
RC-04
Rack Mounting Kit
RMK-1901
RMK-1902
RBK-19
Description
2-port USB DVI KVM Switch with DDM
4-port USB DVI KVM Switch with DDM
6-port USB DVI KVM Switch with DDM
8-port USB DVI KVM Switch with DDM
12-port USB DVI KVM Switch with DDM
6-ft DVI-I & USB KVM cable
10-ft DVI-I & USB KVM cable
15-ft DVI-I & USB KVM cable, special length of KVM cables
are available ( 25-ft, 50-ft )
5-ft serial/control and firmware upgrade cable ( RJ-45 to DB9 female )
Power supply DC 5V ( 2000 mA ) - AC 110/220V for USA
* Any other interface is available upon request
IR remote controller for 2 / 4-port KVM Switch
IR remote controller for 6 / 8 / 12 / 16-port KVM Switch
19” rack mounting bracket set for 4-port KVM Switch
19” rack mounting bracket set for 6 / 8 / 12 / 16-port KVM Switch
19” rack mounting cable support bar
Limited Warranty For ConnectPRO KVM Switches
ConnectPRO offers a 3-year limited warranty for all of its KVM Switches and
KVM Switch modules. ConnectPRO stands behind its products assured that
you're purchasing a proven technology with quality and reliability.
ConnectPRO - USA, Taiwan
www.connectpro.com
Corporate Office
20525 Paseo Del Pr ad o Wa ln ut, CA 91789, USA
Tel +1-9 09 -444-92 88 Fax +1-90 9- 44 4- 92 89
Design Center and Operational Hubs
13F., No .1 20 , Se c. 1 , Sa nm in Rd., B an ci ao D is t.,
New Ta ip ei C it y 220, Tai wa n, R .O.C.
Tel +886 -2 -8 96 4-270 0 Fax + 88 6- 2- 8964- 2977
TM
IG-UD1246812PLUS_V1-2
Loading...