ConnectPRO DVI-EDID User Manual
DVI-EDID
DVI-to-DVI DDC/EDID Emulator
Installation Guide
TM
Features & Benefits
Store EDID information for DVI display
True DDC emulation
- Support dual page DDC for compatible resolutions
Standard EDID data
Installs in seconds
- Easy and Compact design for installation and operation
External supply by USB connector or 5V power supply
Full EDID Cloning
Default and Cloned EDID data selectable
Unit View
Specification
Functional
Power supply
Power LED / Default EDID
Clone EDID
Clone indication
Resolution
Connectors
Mechanical
Dimensions H x W x D
Weight
Certification
DDC
TM
DVI-to-DVI DDC/EDID E mulator
USB B
TM
DDC indicator
* Green = Default EDID
* Orange = Cloned EDID
Display
DDC button
USB B
System
USB A
DVI-to-DVI DDC/EDID E mulator
USB A
5V DC in
Note :
Default EDID information is not optimal for the
particular display being used. It is a generic
configuration with standard resolutions that
might function with a variety of displays.
Power input regulated
DVI-EDID
If required, USB or 5V DC adaptor
Green
Push button switch
Change to Orange color
Up to 1920 x 1200@60 Hz, 2K, and 3840x 2400 ( dual link )
DVI-I Female x 2
22 x 45 x 70 mm ( 0.87 x 1.77 x 2.76 inch )
70 g ( 0.15 lb )
FCC, CE
DC 5V 2000 mA
Installation
To use cloned EDID information ( Orange light means “ Cloned ” )
1 2
If power is unavailable from
the computer via the DVI
pin 14, connect the optional
DC 5V power adaptor or
USB cable
Connect DVI cable from
display to DVI port
4
Special note :
In the majority of cases, the emulator should be used in "clone"
mode to provide optimal display settings for the display being
used. In the event that this is not possible (the display does not
provide DDC/EDID information, or it is otherwise not possible),
Connect DVI cable between
system and DVI port
the emulator should be used in default mode. The EDID
information used in default mode is not for optimal viewing, but
rather to still provide a stable operating environment.
To use default EDID information ( Green light means ” Default ” )
1 2
If power is unavailable from
the computer via the DVI
pin 14, connect the optional
DC 5V power adaptor or
USB cable
Connect DVI cable from
display to DVI port
3
3
Press the DDC button.
(The light will flash 3 times
when a display is initially
cloned. When the light
changes from green to solid
orange, the clone has
succeeded. )
Connect DVI cable between
system and DVI port
Application Connection Diagram
Ordering Information
Step 1
To clone EDID information first. Connect emulator to the monitor.
Special note:
emulator’s power supply has to be connected via DC jack or USB-A/B first
Step 2 for KVM
Video In
Monitor
Video Out
TM
TM
TM
DDC In
TM
DDC Emulator
Traditional KVM Switches
DOES NOT
Which provide two-way DDC communication
will need DDC Emulator(s) placed between KVM switch
and each connected PC.
KVM Switch
Display
Model
Description
DVI-to-DVI DDC/EDID EmulatorDVI-EDID
Optional part / accessory
Cables
UC-AB-04
DVI-202-01
4-ft USB A-to-B cabl e
1-ft Male-to-M ale DVI cable
Power Adaptor
3A-111WX05
Power supply DC 5V ( 2000 mA ) - AC 110/220V for USA
* Any other interface is available upon request
TM
TM
PC
DDC Emulator
Step 2 for Video / KVM extender
Old Video or KVM extender
Which provide two-way DDC communication
DOES NOT
will need DDC Emulator placed between extender unit and PC.
Video In
PC
Video Out
TM
DDC Emulator
Video / KVM
Extender
Video / KVM
Extender
CATx Cable
Legend
Display
ConnectPRO - US A, Taiw an
www.connectpro.com
Corporate Office
20525 Paseo Del Pr ad o Wa ln ut, CA 91789, USA
Tel +1-9 09 -444- 92 88 Fax +1-90 9- 44 4- 9289
Design Center and Operational Hubs
7F., N o. 12 2, S ec. 1, S an min Rd. , Ba nc ia o Ci ty,
Taip ei C ou nt y 22 0, Taiwa n, R .O .C.
Tel +886 -2 -8 96 4-270 0 Fax + 88 6- 2- 8964- 2977
Doc:IG-DVIEDID_V1-1
Loading...