ConnectGear UB502 User Manual

User’s Manual

USB 2.0 2/4 Ports CardBus Card

Table of Contents

Introduction…………………………..………………...……………………………..1
Package Contents…………………………………………..……………………..…1
Safety Instructions…………………………………………..……………………… 1
Specification……………………………………………..…….…………………..…2
System Requirements……………………………………..………………………...2
Hardware Installation………………………………………………………………..2
Driver Installation……..…………………………………..….………………………3
Installation Verification…………..………………………...………………………13
Certificate………………………………………………..…..……………………….15
Disclaimer……………………..…………..……………….…..…………………….15

Introduction

Thank you for purchasing our USB 2.0 2/4 Ports CardBus Card. This handy
device is certified to USB 2.0 standards and is backward compatible with USB

1.1 devices, i.e. your existing USB 1.1 devices can function as usual. It also
allows you to connect multiple peripherals devices to your PC at the same time.
This high-speed USB 2.0 2/4 Ports Card Bus improves performance of
connected devices by providing a full 480Mbps of data transmit speed (40 times
faster than USB 1.1 and 20% faster than IEEE 1394 FireWire), making it ideal for
instant and massive data transfer.

Package Contents

 USB 2.0 2/4 Ports Card Bus card x 1
 Driver CD x 1
 Quick Installation Guide x 1
 Power Adapter x 1 (Optional)

Safety Instructions

1. Always read the safety instructions carefully.

2. Keep the User’s Manual for reference.

3. Lay this equipment on a reliable flat surface before setting it up.

4. If any of the following situations arises, please contact a service technician
for diagnostics:

 The equipment has been exposed to moisture
 The equipment has been dropped or damaged
 If the equipment has an obvious sign of breakage
 The equipment has not been working well or it is still not functioning after

you refer to the User’s Manual

1

Specification

● Compliant with Universal Serial Bus Specification Revision 2.0

● Compliant with Universal Serial Bus Specification Version 2.0 (Data rate

1.5/12/480 Mbps)- transfer speeds of up to 480 Mbps

● Compliant with Open Host Controller Interface Specification for USB 1.0a

● Compliant with Enhanced Host Controller Interface Specification for USB 1.0

● Provides Two External USB2.0 Type-A Ports

● Automatically Switches to the Peripheral's Highest Supported Speed

● Supports 32-Bit CardBus Type II Slots

● Improves peripheral performance for: Scanners, PC Cameras, Device

Storage Units, Broadband Network Connections

● Transfer Rate: 1.5/12/480 Mbps

● USB Spec: v2.0 and v1.1 Compatible

● DC Input: 5V/2.5A Power Switch

● Operating Temperature: 5 ~ 40°C

● Storage Temperature: -10 ~60°C

● Humidity: 0 ~ 80%

System Requirements

● IBM compatible PC or Mac system with available CardBus port

● With one of the following operating systems:

 Windows® 98 SE

®

 Windows
 Windows
 Windows

ME

®

2000

®

XP

 Mac OS X

Hardware Installation

Please find the CardBus port of your system, and insert the USB 2.0 2/4 Ports
CardBus Card into the port. The USB 2.0 2/4 Ports CardBus Card supports
hot-swapping, so you don’t need to turn off your system before the installation.

2

CardBus Card

N

USB Device

otebook PC Power Adapter

PCMCIA slot USB Device

Driver Installation

Windows 98SE, ME

1. After the CardBus Card has been inserted into the CardBus slot, the system
displays This wizard searches for new drives for: NEC USB Open Host
Controller, please click Next

3

2. Please select Search for the best driver for your device. (Recommended),
and click Next.

3. Do not select any option, and click Next.

4

4. Select The updated driver (Recommended), and click Next

5. When the system displays Windows driver file search for the device: NEC
USB Open Host Controller, please click Next.

5

6. Please insert Win98 SE CD-ROM into the CD-ROM Drive when the system
requests as below, and click OK.

7. Please browse the location of the driver in the Win98 SE CD-ROM and click
OK.

6

8. Please click Finish when the system display the following message.

9. Click Yes when the system requests you to restart your computer.

7

10. After the system restarted, please insert the attached CD-ROM into the
CD-ROM drive and double-click the Setup.exe file in the F:\Driver\Windows
folder (F means the CD-ROM drive).

11. Follow the instructions to finish the installation.

8

Windows 2000, XP

1. Make sure the CardBus is inserted into the CardBus slot and turn on power
then insert the attached driver CD-ROM into CD-ROM drive

2. The system will detect the new device, and there will be a pop-up window,
please click Cancel button as needed.

3. Double-click the Setup.exe file in the F:\Driver\Windows folder (F means
the CD-ROM drive).,

4. Follow the instructions to finish the installation.

Mac OS X

1. Click USB2EHCI-v1072.img.bin in the CD-ROM drive, and it will generate

USB2EHCI_v1064.img

9

2. Click USB2EHCI_v1072.img, it will generate USB2EHCI-v1072 on Desktop

3. Click USB2EHCI-v1072 on Desktop, there will be a pop-up window.

4. Click USB2EHCI_v1072.

5. Please click the to make changes.

10

6. Enter the name and password, and click OK.

7. Click Continue

8. Please select a appropriate destination to install driver, and click

Continue

11

9. Click Install.

10. Click Continue Installation

11. Click Restart. After restarting the system, the device is ready to be used.

12

Installation Verification

Windows 98 SE

Windows ME

13

Windows 2000

Windows XP

14

Certificate

FCC

This equipment has been tested and found to comply with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference

that may cause undesired operation.

CE – Certificate

This equipment is in compliance with the requirements of the following
regulations: EN 55 022: CLASS B

Disclaimer

Information in this document is subject to change without notice. The
manufacturer does not make any representations or warranties (implied or
otherwise) regarding the accuracy and completeness of this document and shall
in no event be liable for any loss of profit or any commercial damage, including
but not limited to special, incidental, consequential, or other damage. No part of
this document can be reproduced or transmitted in any form by any means,
electronic or mechanical, including photocopying, recording or information
recording and retrieval systems without the express written permission of the
manufacturer.

15