ConnectGear MU2 HIS User Manual

Keyboard Hot Key for MU4 with serial number begin with 2008

MU4 supports 4 different Hot Key modes to help users to switch PCs quickly and
easily via hot key sequences defined using keypads on a keyboard.

[Left Ctrl] + [Shift] mode – Default

Hot Key Definition

[Left Ctrl]++[Left Ctrl] Switch to next live PC
[Left Ctrl + Shift + 1 through 4] Switch to PC 1 through 4
[Left Ctrl + Shift + → or ↓]
[Left Ctrl + Shift + ← or ↑]

[Left Ctrl + Shift + B] Beeper on/off (note 2)
[Left Ctrl + Shift + S] Auto-scan mode every 10 second, press “ESC”

[Left Ctrl + Shift + S + n] Set auto-scan rate (note 3), press “ESC” once to
[Left Ctrl + Shift + Scroll] Switch to [Scroll]++[Scroll] hot key mode

[Left Ctrl + Shift + Caps] Switch to [Caps]++[Caps] hot key mode
[Left Ctrl + Shift + Num] Switch to [Num]++[Num] hot key mode

[Scroll]++[Scroll] mode

[Scroll]++[Scroll] + 1 through 4] Switch to PC 1 through 4 (note 1)
[Scroll}++[Scroll] + → or ↓
[Scroll]++[Scroll] + ← or ↑

[Scroll]++[Scroll] + B Beeper on/off (note 2)
[Scroll]++[Scroll] + S Auto-scan mode every 10 second, press “ESC”

[Scroll]++[Scroll] + S + n Set auto-scan rate (note 3), press “ESC” once to
[Scroll]++[Scroll]+[Caps] Switch to [Caps]++[Caps] hot key mode

Switch to next live PC
Switch to previous live PC

once to stop auto-scan
stop auto-scan

Hot Key Definition

Switch to next live PC
Switch to previous live PC

once to stop auto-scan
stop auto-scan

[Scroll]++[Scroll]+[Num] Switch to [Num]++[Num] hot key mode
[Scroll]++[Scroll]+[Left Ctrl] Switch to [Left Ctrl]+[Shift] hot key mode

Note 1: “++” means press key rapidly, “[Scroll]++[Scroll]+1” means press “Scroll”
twice rapidly and then press “1”. If the system receives “[Scroll]++[Scroll]” command
only without additional input, the system will reset the buffer after 5 seconds.

Note 2: Audible feedback when beeper is ON and keep the device in silent mode when
the beeper is OFF.

Note 3: n = number from 1 to 9, each represents 5 seconds interval latency up to 50
seconds correspondingly (see Auto-Scan rate set table).

[Caps]++[Caps] mode

Hot Key Definition

[Caps]++[Caps] + 1 through 4] Switch to PC 1 throug h 4 (note 1 )
[Caps}++[Caps] + → or ↓
[Caps]++[Caps] + ← or ↑

[Caps]++[Caps] + B Beeper on/off (note 2)
[Caps]++[Caps] + S Auto-scan mode every 10 second, press “ESC”

[Caps]++[Caps] + S + n Set auto-scan rate (note 3), press “ESC” once to
[Caps]++[Caps]+[Scroll] Switch to [Scroll]++[Scroll] hot key mode

[Caps]++[Caps]+[Num] Switch to [Num]++[Num] hot key mode
[Caps]++[Caps]+[Left Ctrl] Switch to [Left Ctrl]+[Shift] hot key mode

Switch to next live PC
Switch to previous live PC

once to stop auto-scan
stop auto-scan

[Num]++[Num] mode

Hot Key Definition

[Num]++[Num] + 1 through 4] Switch to PC 1 through 4 (note 1)
[Num}++[Num] + → or ↓
[Num]++[Num] + ← or ↑

[Num]++[Num] + B Beeper on/off (note 2)
[Num]++[Num] + S Auto-scan mode every 10 second, press “ESC”

[Num]++[Num] + S + n Set auto-scan rate (note 3), press “ESC” once to
[Num]++[Num]+[Caps] Switch to [Caps]++[Caps] hot key mode

Switch to next live PC
Switch to previous live PC

once to stop auto-scan
stop auto-scan

[Num]++[Num]+[Scroll] Switch to [Scroll]++[Scroll] hot key mode
[Num]++[Num]+[Left Ctrl] Switch to [Left Ctrl]+[Shift] hot key mode

Auto-Scan Rate Set Table

“n” Number

1 5
2 10

3 15
4 20

5 25
6 30
7 35
8 40
9 60

Second