Connected AMV01 Users Manual

AR-4MA

AR-4MA, not your standard
connected car device.

AR-4MA was designed to protect a dealer’s

inventory from theft and misuse, as well as improve

the efciency of oor plan audits, increase xed

operations protability, and enhance the sales

process. Utilizing GPS technology in a new car

franchise dealership requires unique, customization.

The connected car system was designed from the

bottom up to help franchise dealerships achieve

their goals.

AR-4MA is an evolutionary second-generation

connected car hardware that enables dealers

to locate inventory, manage loaner and demo

inventory, prevent loss due to theft, reduce costs,

increase staff efciency and increase CSI.

HIGHLIGHTS

•

Future-proofed 4G LTE technology

•

Expanded coverage throughout the

U.S. and Canada for stronger vehicle

connections and more accurate data

•

Lower power consumption

AR-4MA

SPECIFICATIONS

CELLULAR

4G LTE

Integrated Hyper Sensitive GPS and Cellular Antenna

GPS FUNCTIONALITY

Processor: 56 Channel

Width: 1 1/2 Inches

Depth: 11/16 inches

Length: 3 1/2 inches

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a par­ticular installation. If this equipment does cause harmful interference to radio or televi­sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.
RF Exposure Warning Statements:

The antenna(s) used for this transmitter must be installed to provide a separation dis­tance of at least
20 cm from all persons during the normal operations.

IC STATEMENT

This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en comprom­ettre le fonctionnement.

In order to avoid the possibility of exceeding the IC radio frequency exposure limits,
human proximity to the antenna shall not be less than 20cm (8 inches) during normal
operation.

An d’éviter la possibilité de dépasser les limites d’exposition aux fréquences radio de

la IC CNR102, la proximité humaine à l’antenne ne doit pas être inférieure à 20 cm (8
pouces) pendant le fonctionnement normal.

Location Accuracy: up to 2.5 feet

POWER SOURCE

Operating Voltage: 6V – 28V

POWER CONSUMPTION

Normal Mode: 7-25 mA

Standby Mode: 2.5 - 5.5 mA

Lowest power consumption available, ensuring minimal impact on

vehicle batteries - (Uses approx. 1/1000th power of a smart phone.)

ENVIRONMENTAL

Operating Temperature: -22 degrees F to +167 degrees F

Dust Resistant

Designed to withstand harsh environments

PHYSICAL SPECIFICATIONS

Dimensions: 3 1/2” x 1 1/2” x 11/16”

CERTIFICATIONS

Fully Certied and Industry Compliant: FCC, PTCRB, RoHS2