Page 1
TOP OF UPSTAND
TOP OF SINK BOWL
HEF718
1. READ THE ‘INSTALLATION’ AND ‘CARE &
MAINTENANCE’ INFORMATION
2. PEEL & STICK TEMPLATE IN POSITION
3. DRILL THROUGH THE 6x CROSS MARKS
FOR WALL FIXINGS
INSTALLATION TEMPLATE
INSTALLATION:
installing hand basins ensure that the wall structure is sufficiently sound to support
the product during use. Ensure that suitable wall fixings are used. If in any doubt, do
not complete the installation.
We accept no responsibility for loss or damage caused as a result of poor installation
or operator misuse such as the overflowing of hand basins. Test the strength of
the installed product and advise the customer regarding the safe operation of the
product(s) before leaving site.
CARE & MAINTENANCE:
through general use. In order to keep your CONNECTA product in good condition, it
should be kept as clean as possible. With proper care, your CONNECTA product will
give many years of service life.
Care should be taken during installation to ensure that surface contamination is
avoided. The best way to do this is to leave the protective plastic film in place as long
as possible during installation, and then remove it just before the product is used.
For general cleaning use soap or mild detergent and water on a sponge. Rinse
with clean water and wipe dry if necessary. For heavier stains use a mild household
cleaning solution, rinse well with clean water and wipe dry if necessary. Avoid
abrasive cleaning products such as scourers.
Thank you for choosing CONNECTA products.
CONNECTA products are designed to be easy to install. When
All grades of stainless steel can stain and discolour
UK91-TEMPLATE-CONN, rev 04/2021
Loading...