Page 1
HEF717
INSTALLATION TEMPLATE
1. READ THE ‘INSTALLATION’ AND
‘CARE & MAINTENANCE’ INFORMATION
2. PEEL & STICK TEMPLATE IN POSITION
3. DRILL THROUGH THE 4x CROSS MARKS
FOR WALL FIXINGS
INSTALLATION:
hand basins ensure that the wall structure is sufficiently sound to support the product during use.
Ensure that suitable wall fixings are used. If in any doubt, do not complete the installation.
We accept no responsibility for loss or damage caused as a result of poor installation or operator
misuse such as the overflowing of hand basins. Test the strength of the installed product and
advise the customer regarding the safe operation of the product(s) before leaving site.
CARE & MAINTENANCE:
order to keep it in good condition, it should be kept as clean as possible. With proper care, your
CONNECTA product will give many years of service life.
Care should be taken during installation to ensure that surface contamination is avoided.
For general cleaning use soap or mild detergent and water on a sponge. Rinse with clean water
and wipe dry if necessary. For heavier stains use a mild household cleaning solution, rinse well with
clean water and wipe dry if necessary. Avoid using harsh chemicals or abrasive cleaning products
such as scourers.
Thank you for choosing CONNECTA products.
CONNECTA products are designed to be easy to install. When installing
This CONNECTA basin is made from ABS Polycarbonate and in
UKWS1-TEMPLATE-CONN, rev 04/2021
Loading...