Conmo ESBS-58 User Manual

EatSmart

Precision SMARTSCALE

Bluetooth® Body Analyzer with Fitness App

ESBS-58

EatSmart Products
Las Cruces, NM 88001
866-843-3905

Introduction

Thank you for purchasing the Conmo SMARTSCALE Bathroom Scale. This body fat scale is designed and
manufactured in a facility certified ISO 9001 Quality, BSCI Certification and Safety Management Systems
and ISO13485 Medical Devices Quality Management System. The scale uses the method of Bioelectrical
Impedance Analysis (BIA) to estimate body fat, total body water, bone mass, and muscle mass
percentage. It sends a harmless amount of electricity into the body, then estimates from the measured
impedance of the body, the percentage of total body water, percentage of muscle mass, percentage of
bone mass and percentage body fat. The body fat scale also calculates body mass
index (BMI) and estimates basal metabolic rate (BMR), which the scale displays as “Kcal”. The body fat
scale is also equipped with an “Athlete Mode” for athletes whose body build is different from non-
athletes.

Your SMARTSCALE Bathroom Scale comes with the following:

• SMARTSCALE Digital Body Fat Scale

• Instruction Manual

• 3 AAA Batteries

• 2 Year EatSmart Guarantee

Please read this instruction manual carefully before use.

If you have any questions regarding the operation of your SMARTSCALE Bathroom Scale, please
call 866-843-3905 from 8:00 AM to 5:00 PM, Monday through Friday, Mountain Standard Time.

Please fill out your purchase information for future reference:
Date Purchased:………………………………………………………………….
Place Purchased:…………………………………………………………………
Order ID (if any)…………………………………………………………………..

NOTES ON SAFETY

Please read this section carefully to familiarize yourself with features and operations
before using the unit.

• The warning signs and the sample icons shown here are listed in order for you
to use this product safely and correctly as well as to prevent product damage,
risk and injury to you and others.

• The icons and meanings are as follows:

This scale is intended to measure body weight and impedance and estimate
percentage of body fat, muscle mass, bone mass and body water using BIA (Bioelectrical
Impedance Analysis). It is intended for use by healthy adults with active,
moderately active, to inactive lifestyles for body composition assessment in the
home environment.

• Do not use the scale on people who have body implants such as a
pacemaker, artificial limbs, contraceptive devices, or metal plates
or screws. It may cause the device to malfunction or produce an
inaccurate result. When in doubt, consult your physician.

•Do not use on pregnant women. The result is inaccurate and effects on the
fetus are unknown.

• Do not disassemble the scale as incorrect handling may cause injury.

• Do not step on the scale when your body or feet are wet, especially

after bathing or showering to prevent slipping.

• This product is intended for adults and children (ages 18 to 80).

•Make sure to use only the type of battery stated (see Section “PREPARATION
BEFORE USE”).

•The “Athlete” mode is applicable only to people 18-80 years of age.

•Body fat percentage estimates will vary with the amount of water in the

body, and can be affected by dehydration or over-hydration due to such
factors as alcohol consumption, menstruation, illness, intense exercise, etc.

•Do not use on pregnant women. The result is inaccurate and effects on the
fetus are unknown.

•For body fat and body water estimates, always estimate in bare feet.

1. Insert the Battery
This scale operates on 3 'AAA' batteries (included). Remove any plastic wrap from the batteries before
installation. Remove any screws and open the battery cover on the back of the scale unit. Place the
batteries into the battery compartment according to the “+” and “-” polarity symbols at the bottom of
the compartment. Replace the battery compartment cover and screw(s). If you do not intend to use this
unit for a prolonged period of time, it is advisable to remove the batteries before storing.

NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle

batteries. If swallowed, seek medical attention immediately.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if
the scale will not be used for a long period of time.

2. Set units of measurements
Your scale is set at the factory to weigh in pounds (lb). To switch to kilogram (kg) or
stone (st) units of measurement (1 stone = 14 pounds), press the button on the bottom of the scale
while the scale is on. (Press firmly on the platform to turn the scale on.)

3. Some models have a static cling label on the LCD lens to prevent scratching. Remove before use.

4. Set the scale in the right position
Always use the scale on a flat and hard floor surface. Do not use on carpets. Carpeted or uneven flooring
may affect accuracy.

5. Start-up the Scale
Press firmly on the scale platform to start-up the scale. The display shows “0.0” and then turns off. The
scale is ready for use.

Artwork is FPO

SETTING UP YOUR SMART SCALE USING BLUETOOTH® 4.0 TECHNOLOGY

The SMARTSCALE can estimate body fat, body water, muscle mass and bone mass percentages, daily

calorie estimates, BMI and weight difference compared to goal weight and real weight, and then it
transmits your results to an app on a mobile device using Bluetooth® 4.0 technology. You can use

your SMARTSCALE with or without Bluetooth 4.0 transmitting data. Below are the directions for

setting up the scale using Bluetooth 4.0.

Download the free EatSmart app from the Apple store (for IOS devices) or Google play (for Android

devices).

To add new user profile:

1. Your SMARTSCALE will scan the mobile device automatically, please make sure the Bluetooth
setting is “ON” and your device is within 3-30 ft. of the scale.

2. Edit the user profile to set up your personal data, including activity levels and goal weight.

3. Proceed to the next step to store your user profile.

4. If you would like to change personal data, including activity levels and goal weight, simply edit the

user profile again and be sure to save the changes.

5. Step directly on to the platform with bare feet to turn the scale on. Your measurements will appear

on the app and scale.

6. To delete the selected user profile, double click the user profile and then press “Delete”. Tap the

“Confirm” button to approve deletion.

Setting Up Your Profile with the EatSmart App

1. Open the app and it will search to connect with your SMARTSCALE. Tap “NEXT” to enter your
personal information.

Note: If it cannot locate your SMARTSCALE you may press “Search Again” or you may select
“Shop EatSmart Scale” to purchase a SMARTSCALE through Amazon.

2. Enter Your Height
Use the ruler on the side to increase or decrease your height. Tap “NEXT” to continue or “BACK” to
return to the previous screen.

3. Enter Your Date of Birth
Scroll through the Month, Date and Year to select your birthdate. Tap “NEXT” to continue or “BACK” to
return to the previous screen.

4. Select Your Gender
Select either the Male or Female icon to choose your gender. Tap “NEXT” to continue or “BACK” to
return to the previous screen.

Bob: on “Gender” which shall have icon to choose: Male, Male athlete, Female and female athlete

5. Choose a Trainer
You may select among 3 different types of Trainers (Easy Does It, Strict But Friendly, or Tough As Nails)
to keep you on track and motivated during your fitness journey. Depending on your choice, these
Trainers will send you relaxed, moderate, or strict motivational messages during your weigh-ins. Tap
“NEXT” to continue or “BACK” to return to the previous screen.

Note: A Trainer must be selected to continue the set up process.

6. Choose an Activity Level
Select your current activity level. This will allow the app to better read vital data and provide guidelines.
Tap “NEXT” to continue or “BACK” to return to the previous screen.
Inactive: little or no exercise
Limited Activity: exercise 1-3 days a week
Moderate Activity: exercise 4-5 days a week
Very Active: exercises 6-7 days a week
Extremely Active: physically demanding exercise or athletic training

7. Add Your Name, Email Address and Password
Once your password is confirmed, tap “NEXT” to continue or “BACK” to return to the previous screen.

8. Add a Profile Picture (Optional)
You may personalize your profile with a picture. This is optional and not required to complete setting up
your profile. Tap “NEXT” to continue or “BACK” to return to the previous screen

9. Terms & Conditions
In order to continue using the EatSmart app you will need to agree to the Terms & Conditions. You may
read the full Terms & Conditions by clicking on the on the link. Please select “Agree” or “Disagree”. Tap
“NEXT” to continue or “BACK” to return to the previous screen.

NOTE:

1. In the event you are sharing the scale with another user and they enter a personal profile through the
scale manually, if you select their user number your app profile will override their profile information
entered on the scale.

2. Data will only be transmitted if attached to a specific memory number. If a personal profile has not
been assigned to a memory number, the results will appear once on the scale display only and will not
be transmitted or saved.

3. If you prefer to use the scale without the app, please refer to

EatSmart App Features

Widgets

The EatSmart app has several features to help you with your fitness goals. You can easily see your
weight, body fat, muscle mass, bone mass, body water, caloric intake (kCal), and BMI through your
dashboard. To select which Widgets you would like to see, simply go to Settings > Manage Dashboard.

Link your EatSmart App to MyFitnessPal and RunKeeper

Maximize your fitness goals by linking up with MyFitnessPal and RunKeeper and add their widgets to
your dashboard. You can track caloric intake (kCal) and calories burned without ever having to leave the
EatSmart app!

Achievements

Stay motivated by unlocking achievements during your fitness journey. Achievements help you reach
and maintain weight, body fat, BMI, body water, muscle mass targets and keep you accountable for
weigh-ins. You can also add notes to help you document your progress along the way.

Vacation Mode

You are able to pause all data and silence notifications by turning “On” Vacation Mode found under the
“Settings” tab. Once Vacation Mode is turned off you will resume right where you left off without

skipping a beat.

Note: You can turn off notifications under Settings > Manage Notifications however your data will not be
paused.

Manage EatSmart App Settings

Tap the “Settings” tab at the bottom of the screen to easily edit your profile and manage settings such
as notifications, trainer personality, dashboard preferences, etc.

DATA TRANSMISSION FROM SMARTSCALE TO MOBILE DEVICE

When your SMARTSCALE has been paired up with your phone or other mobile device, your data

results will be transmitted to the device via Bluetooth. An onscreen “ ” icon indicates a successful

Bluetooth® connection.

A “ ” icon appears while data is transmitted, then disappears when transmission is complete. You

may review your data on your mobile device.

If the “ ” icon remains on the screen, the transmission has failed. The scale will temporarily store
the pending data, and it will be transmitted after the next measurement is complete.

CONNECTION TROUBLESHOOTING

If the transmission fails, repeat the above steps. To improve the transmission connection, follow these

guidelines:
a) Place the scale and Bluetooth® device reasonably close together, between 3 and 30 feet.

b) Check for any obstacles between the scale and the Bluetooth. Obstacles may cause interference.

c) Other electronic devices may cause interference (particularly those with Bluetooth); keep them at
least 3 feet away from the scale.

NOTE: If the batteries are removed from the scale, you will not have to reconnect the scale to the app
because it will still recognize the device when you replace the batteries.

Your EatSmart SMARTSCALE Bathroom Scale can operate as a basic weight-reading scale. No
special programming is required.

1. Your scale has been set at the factory to measure in pounds and inches (lb/in). On the bottom of the
scale, there is a button that can change the measurement units to kg / st:lb . If you wish to change the
measurement units, press the button to (kg / st:lb).

2. Place the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy.

3. Step onto the scale platform and remain still. Your weight will display.

4. The scale will power off automatically.

This scale has 8 personal memory numbers (P1-P8). Before estimating body fat and body water, you
must first save your height, age, gender, normal/athlete mode option and an activity level selection into
a memory number. The scale will then use these factors to estimate your results. Once you have saved
your personal data into memory, it will only need to be reentered if there is a change to the data

The accuracy of the results depends on how you stand on the scale. Position your feet with maximum
contact on the invisible electrodes on the platform. This ensures the best contact between your feet and
the metal contacts. Stay on the scale until the body fat estimation is completed and the result is
displayed. Clean, slightly moist feet will provide the best results.

PROGRAMMING PERSONAL DATA

The SMARTSCALE can store personal user profiles for up to 8 users. Before doing a body composition
analysis you must first set up a user profile.

1. Press “SET” to turn on the scale.

2. Set Profile Number

The profile number (P1-P8) will flash. Press ▲ or ▼ to choose a profile number. Press “SET” to confirm.

(insert line art)

3. Select Gender

Press ▲ or ▼ to choose male / male athlete / female / female athlete . Press “SET” to
confirm.

(insert line art)

Definition of an Athlete:
The general consensus among researchers is that a quantitative dimension could be used in
defining an athlete. For example, an athlete could be defined as a person who consistently
trains a minimum of three times per week for two hours each time, in order to improve specific
skills required in the performance of their specific sport and/or activity.

4. Select an Activity Level

Press ▲ or ▼ to choose an activity level. Press “SET” to confirm. The height digits flash.

Select your Activity Level according to the following guidelines:
Level-1 Sedentary / Very Inactive: little or no exercise
Level-2 Limited Activity: exercise/sports 1-3 days a week
Level-3 Moderate Activity: exercise/sports 4-5 days a week
Level-4 Very Active: exercise/sports 6-7 days a week
Level-5 Extremely Active: physically demanding exercise/sports or athletic training

(insert line art)

5. Enter Your Height

Press ▲ or ▼ to increase/decrease height digits. Press “SET” to confirm. The age digits flash.

(insert line art)

6. Enter Your Age

Press ▲ or ▼ to increase/decrease the age digits. Press “SET” to confirm.

(insert line art)

7. Enter Goal Weight

Press ▲ or ▼ to choose the goal weight. Press “SET” to confirm.

(insert line art)

8. When the display reads 0.0, step on the scale with bare feet to measure your weight otherwise the
scale will automatically shut off. Your data has been saved.

Body Fat, Body Water, Muscle Mass, Bone Mass, BMI, Calorie and Weight Estimating Operation
You must have bare feet for estimation results, please remove your shoes and socks now before

proceeding. Clean, slightly moist feet will provide the best results.

1. Press down on the scale platform with your foot. The scale will turn on and a memory number (P1­P8) will display.

Bob: Press “SET” to power on scale, a memory number will blink

2. Remove your foot when your memory number appears.

Bob: Press the ▲ or ▼ buttons until your memory number appears. Wait for the screen to show “0.0”.

3. When the scale shows “0.0”, step on the scale with bare feet and stand still. The display will show
your weight. Continue to stand still on the scale.

4. The display will show a moving zeroes pattern (“0000”) while computing your other results.

5. After a few seconds, BMI, the body fat %, body water %, muscle mass %, bone mass %, calorie ,
weight difference compared to goal weight and weight results will appear twice in sequence.

6. The scale will turn off automatically.

7. If two or more users are in a similar weight range (within +/- 6.6 lbs / 3 kgs), the scale will notify you
to choose between, for example, P1 and P2. Press ▲ or ▼ to get to the correct profile number and
select by pressing ‘SET’. If the scale cannot identify the user’s profile number, it will only display the
weight.

Bob: If you want to delete the user profile, press the “SET ” button for 3 seconds and the display will
show “dEL”, then the select the user profile will be deleted.

1. No weight displayed?

Check to see if the scale is powered up and started up. If not, please refer to the
Section “Preparation Before Use”.

2. Why does the display read “Lo”?

Battery is running low. Replace the battery.

3. You must have bare feet to make this measurement.

To get the most accurate and consistent reading, wipe your feet with a damp cloth, leaving them slightly
damp before stepping on the scale.

4. If the scale displays all icon for more than 6 seconds?

Calibration error. Step off the scale and wait until the scale automatically turns off. Start the scale again
by pressing firmly on the scale platform to re-calibrate the scale. The display shows “0.0” and then turns
off. The scale is ready for use again.

5. The message displays “ Err ”?

Overload Warning. The maximum weight capacity of the scale (440 lbs / 200 kgs) has been exceeded.
Remove the weight immediately; otherwise, permanent damage to the scale will occur.

6. The message displays “Err1”?

Contact error. Clean bottom of feet with a damp cloth, leave slightly damp, and repeat measurement
again, maintaining maximum contact between your feet and the metal sensors.

7. The scale displays “Err L” when estimating body fat, body water, muscle mass and bone mass values?

Estimated values are lower than the minimum values the scale can estimate. Moistening your feet may
help to improve the electrical contact.

8. The scale displays “Err H” when estimating body fat, body water, muscle mass and bone mass
values?

Estimated values are higher than the maximum values the scale can estimate. Moistening your feet may
help to improve the electrical contact.

1.OVERLOAD WARNING: the maximum weight capacity of this scale is 440 lbs / 200 kgs. Remove the
weight immediately when the scale displays “ Err ”; otherwise, permanent damage to the scale will
occur.

2.The product is intended for home / consumer use only; it is not intended for professional use in
hospitals or medical facilities.

3.Do not disassemble the product. Other than replacing the batteries, it contains no user serviceable
parts.

4.Clean after use with a lightly dampened cloth. Do not use solvents or immerse the product in water.

5.Your scale contains sensitive electronic parts. Avoid rough treatment. Do not drop, kick, or jump on it.
Treat it with care to ensure the best performance.

6.Do not store the scale where you store cleaning chemicals. The vapors from some household products
may affect the electronic components of your scale. Do not store the scale on its side.

7. This scale is a sensitive weighing device. To prevent run down of the battery, do not store anything on
the scale.

8.Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the scale will
not be used for a long period of time.

Specifications

 Weight Capacity: 440Lb or 200Kg
 Weight Graduation: 0.2Lb or 0.1Kg
 Body Fat Graduation: 0.1% (in the range from 4% - 60%)
 Body Water Graduation: 0.1% (in the range from 27.5% - 66%)
 Body Muscle Graduation: 0.1% (in the range from 20% - 56%)
 Body Bone Graduation: 0.1% (in the range from 2% - 20%)
 Height Range: 3’ 3” – 7’2.5” (100.0 – 220.0cm)
 Age Range: 18-80 years
 Measures weight, BMI, body fat, body water, muscle mass and bone mass
 Weight-only feature with automatic step on
 8 user profiles
 Athlete or normal mode
 User selectable units of measure (lb / in), (st / in) or (kg / cm)
 Low battery indicator
 Operates on 3 AAA batteries

EDUCATION INFORMATION

Before using the scale, you should know ...

1. Why is it important to monitor percentage body fat (%BF)?

The absolute weight traditionally determines whether or not a person is obese. Weight change in itself
does not indicate whether it was the weight of body fat or muscle that had changed. In weight
management, it is desirable that muscle mass be maintained while body fat is lost. Thus, monitoring the
percentage of fat in the body is an important step toward successful weight management and body
health.

2. How is percentage body fat (%BF) estimated?

The percentage of BF is measured by a method called Bioelectrical Impedance Analysis (BIA). The use of
BIA to estimate body fat has been pioneered since the seventies. It was only in the past decade that the
estimation of body fat using BIA technology was successfully offered to the consumer as a compact
bathroom scale. With BIA technology, a low intensity electrical signal is sent through the body. The
signal is very low and causes no bodily harm. Depending on the amount of body fat of the individual, the
electrical signal will flow with a different degree of difficulty. The difficulty with which a signal flows

through the body is called electrical impedance. Hence, by measuring the electrical impedance and
applying to the data a proprietary algorithm, %BF can be estimated.
‘Please note that the percentage of body fat and body water will not add up to 100%.’

Please be reminded that the %BF estimated with the scale represents only a good approximation of

your actual body fat. There exist clinical methods of estimating body fat that can be ordered by your
physician.

3. Why is it important to monitor percentage Total Body Water (%TBW) in the body?

Water is an essential component of the body and its level is one of the health indicators. Water makes
up approximately between 50-70% of the body’s weight. It is present proportionally more in lean tissue
compared to fat tissue. Water is a medium for biochemical reactions that regulate body functions.
Waste products are carried in water from cells for excretion in urine and sweat. Water provides form to
cells; helps to maintain body temperature; provides moisture to skin and mucosa; cushions vital organs;
lubricates joints and is a component of many body fluids. The amount of water in the body fluctuates
with the hydration level of the body and state of health. Monitoring the level of body water can be a

useful tool for one’s health maintenance. Similar to body fat estimation, the %TBW function provided in

this scale is based on BIA. The estimated %TBW may vary according to your hydration level, that is, how
much water you have drunk or how much you have sweated immediately prior to the estimation. For
better accuracy, avoid fluctuation in hydration level prior to the estimation. The accuracy of the scale in
estimating TBW will also decrease with individuals suffering from diseases that tend to accumulate
water in the body.
Please be reminded that the %TBW estimated with the scale represents only a good approximation of
your TBW. There exist clinical methods of estimating total body water that can be ordered by your
physician.
The optimal %BF and TBW% of an individual varies according to age and gender.
The table as follows may be used as a guide.

4. When should I use the scale’s body fat and total body water functions?

For maximum accuracy and repeatability, it is recommended that the scale’s body fat and total body
water functions be used at approximately the same time of the day, e.g. before breakfast in the morning.
It is also a good practice to avoid swings in hydration level of the body prior to the estimation.
Establishing your own baseline value of %BF and %TBW and tracking their changes is better than merely

comparing your %BF and %TBW value to the population’s “normal” value. The estimates provided are

not substitutes for physician assessments. Consult your physician to determine what body fat
percentage, total body water percentage and daily calorie intake are most ideal for you.

5. What is Muscle Mass?

Our Body Fat Scale estimates the weight of Skeletal Muscle Mass in your body. You have around 650
muscles in your body, and they make up roughly half of your body weight. These muscles can be divided
into three different groups: skeletal, smooth and cardiac. All of these muscles can stretch and contract,
but they perform very different functions.

Skeletal muscle: Produces movement, maintains posture, stabilizes joints and generates heat
Smooth muscle: Found in the walls of hollow organs
Cardiac muscle: Exists only in your heart

Skeletal muscle (SM)
The tissue most commonly thought of as muscle is skeletal muscle. Skeletal muscles cover your skeleton,
giving your body its shape. They are attached to your skeleton by strong, springy tendons or are directly
connected to rough patches of bone. Skeletal muscles are under voluntary control, which means you
consciously control what they do.
Just about all body movement, from walking to nodding your head, is caused by skeletal muscle
contraction. Your skeletal muscles function almost continuously to maintain your posture, making one
tiny adjustment after another to keep your body upright. Skeletal muscle is also important for holding
your bones in the correct position and prevents your joints from dislocating. Some skeletal muscles
in your face are directly attached to your skin. The slightest contraction of one of these muscles changes
your facial expression.
Skeletal muscle generates heat as a by-product of muscle activity. This heat is vital for maintaining your
normal body temperature.
Skeletal muscle represents approximately 30% of body weight of a healthy 127.8 lb woman or 40% of a

154.3 lb man. (International Commission on Radiological Protection, 1975).

6. What is the Cal-Pal™ daily calorie intake estimator?

The Cal-Pal™ function estimates the number of calories required based on your body composition and
user entered personal data. This tool can be used as a guide when setting calorie goals during weight
loss and exercise programs. This estimate shows on the LCD as Kcal (Basal Metabolic Rate).

7. Why is the Athlete Mode necessary in a Body Fat Analyzer?

It has been found that body fat estimation using BIA could overestimate the percentage body fat of
adult elite athletes. The physiological variation of athletes in bone density and level of hydration are two
of the reasons said to account for the difference. The Athlete mode is selectable only for people 18-80
years old.

8. Definition of an ‘Athlete’

The general consensus among researchers is that a quantitative dimension could be used in defining an
athlete. For example, an athlete could be defined as a person who consistently trains a minimum of
three times per week for two hours each time, in order to improve specific skills required in the
performance of their specific sport and/or activity.

*“ITO” changes to “Invisible”

LCD READOUT

Button Functions
SET

• Turns scale on.

• Confirmation button selection

▲ / ▼(Up/Down)

• Changes value of height, age, activity level and goal weight, toggle between Male / Male athlete and

Female / Female athlete in Body Fat function

• Select memory P1 – P8 in Memory mode & Recall mode

• Recall settings of memory locations

FCC REGULATIONS
FCC User Guide Information
Radio Frequency Interface Requirements - FCC
Caution: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV technician for help.

“The device must not be co-located or operating in conjunction with any other

antenna or transmitter.”

“This device complies with FCC’s radiation exposure limits set forth for an

uncontrolled environment”

The warranty covers defects in material and workmanship of the product under normal use for a period
of two (2) years from the date of retail purchase. The warranty does not cover damages resulting from
misuse, abuse, immersion, normal wear and tear or unauthorized modification.

Should this scale require service (or replacement at our option) while under warranty, please contact
for return authorization and troubleshooting.
[phone] (8 to 5 MST)

There are no expressed warranties except as listed above. This warranty gives you specific legal rights
which may vary from state to state.

NOT LEGAL FOR TRADE.
Made in China.