USER’S GUIDE – SPARE PARTS
ROUGH TERRAIN PALLET TRUCK NH-1 AND NH-2
INTRODUCTION
- This guide must be considered as part of the machine, and shall then be
included when delivered.
- Total or partial copy of this guide is not allowed without CONHERSA‘s
acceptance.
- The information in this guide is based on facts available on site while
publication of this information. CONHERSA keeps the rights to make any
change without notification at any moment.
SAFETY INSTRUCTIONS
- Do not overload the rough terrain pallet truck (max. 1,500 kg).
- Do not change the forks without notifying CONHERSA.
- Keep load well blaced between both forks.
- Do not use the pallet truck on heavy slopes.
- Do not lift load only with the nails of the forks.
MAINTENANCE
- Verify periodically the hydraulic oil level.
- Use hydraulic oil with a 20-22 viscosity.
-
To fill the oil tank, ensure the forks to downwards position, remove cap,
pour the oil up to the lowest part of the cap’s hole and replace the cap.
OPERATION INSTRUCTIONS
UP: - CLOSE THE WRENCH
- OPERATE THE HYDRAULIC HANDLE
DOWN: - OPEN THE WRENCH
HYDRAULIC OF PALLET TRUCK NH-1 AND NH-2. SPARE PARTS
Nº CODE DESIGNATION
1 030800 Piston
2 030100 Hydraulic stiff
3 032100 Prisoner
4 031400 Ball 6 mm.
5 030400 Wrench
6 031300 Ball 8 mm.
7 031200 Spring
8 031900 Washer
9 032000 Screw
10 031100 Spring
11 030900 Protective
13 031700 Towing eye
14 030300 Offset piston
15 030200 Hyd. Handle
16 031800 Scraper
17 031500 O Ring
18 032300
Bolt ∅10
19 100000 Pin 3x30
20 110000 Pin 5x50
21 032200 Cap
22 031600 O Ring
TECHNICAL CHARACTERISTICS
NET WEIGHT: 173 kg.
MAXIMUN LOAD CAPACITY: 1.500 kg.
PALLET TRUCK NH-1 AND NH-2 SPARE PARTS
Nº CODE DESIGNATION
1 360000
Ring ∅18
2 090000
Bolt ∅18
3 300000 Roller
4 020000 Fork grouping
5 030000 Hydraulic
6 110000 Pin 5x50
7 100000 Pin 3x30
8 320000 Forks frontwall cover
9 060000 Handle
10 032300
Bolt ∅10
11 160000 Nut M-12
12 180000 Screw 12X30
13A 410000 Chassis NH-1
13B 420000 Chassis NH-2
14 290001 Wheel 4.00-8”
16 330000 Self-lubricated bushing
17 040000 Guiding axle
18 200000
Ring ∅25
20 270000 Wheel 3.50-8”
21 340000 Self- lubricated bushing with rim
Loading...