Conextion sonoma ten, sonoma twenty Owners And Installation Manual
Owner’s and
Installation Manual
sonoma™ Series
Indoor/Outdoor Speakers
Includes Models
sonoma™ ten and twenty
sonoma™ Series Indoor/Outdoor Speakers
2
Owner’s and Installation Manual
3
Introduction
Congratulations and thank you for choosing a
sonoma™ Series Loudspeaker from coNEXTion
Systems! With proper installation and operation,
you’ll enjoy years of trouble-free use either indoors
or out. We work very hard to ensure that all of
our speakers consistently deliver exceptional
performance and value. We hope you enjoy
them to their fullest. Please take a moment to
read this manual so that you can get the most
from your new speakers. coNEXTion Systems
manufactures a full line of ceiling, inwall, and
indoor/outdoor speakers. To learn more about our
products, and to see a video demonstration of the
sonoma™ Series speakers, please visit our web
site at www.conextionsystems.com or call us at
866-310-NEXT (6398). Use the illustrations below
to familiarize yourself with the major components
of your new sonoma™ Series Loudspeaker.
Major Components of the
sonoma™ ten Speaker
Major Components of the
sonoma™ twenty Speaker
Dual Voice Coil
5.25" Aluminum Woofer
SFPC™ Passive Radiator
1" Aluminum Tweeters
End Cap
Angle Locking Lever
Speaker Terminals
All-in-one
Mounting Bracket
sonoma™ 20
Speaker Enclosure
5.25" Aluminum Woofer
SFPC™ Passive Radiator
1" Aluminum Tweeter
End Cap
Angle Locking Lever
Speaker Terminals
All-in-one
Mounting Bracket
sonoma™ 10
Speaker Enclosure
Owner’s and Installation Manual
3
Features and
Benets
sonoma™ ten—Two-way Speaker
sonoma™ ten speakers feature a single aluminum
5.25" woofer and a single 1" aluminum tweeter
for each channel in a traditional stereo pair design.
sonoma™ twenty—
Single Point Stereo Speaker
When you need a stereo image, but only have
room for one speaker, the sonoma™ twenty will
do the job! The twenty features a dual voice coil
aluminum 5.25" woofer and two 1" aluminum
tweeters mounted at a 45° angle that reproduces
a stereo image out of a single enclosure.
sonoma™ Speakers Sound Better and
Install Faster
Our entire line of sonoma™ Series speakers feature a sleek architectural design that easily blends
into all installation environments. The all-in-one
speaker and installation bracket design is ready to
install right out of the box. No more disassemble
and reassemble issues with a two piece bracket
and trying to thread the mounting knobs while
holding a speaker and standing on a ladder!
Stealth Designed “End Caps”—
the Secret Hideaway
The sonoma™ unique “end cap” design hides the
four pre-threaded mounting screws, the speaker
terminals and wire, and the locking lever (see below) for a more theft-resistant installation.
Aiming and Locking the Angle
Your speaker has the ability to adjust (lock and unlock) the angle of the speakers with a convenient
and easy-to-use lever system providing up to 40°
of adjustment to the optimal listening position.
The World’s First Indoor/Outdoor SFPC™
Weather-resistant Bass Extension System
All sonoma™ Series speakers feature our SFPC
(side ring pneumatic coupled) design. The SFPC
system features dual passive radiators molded into
the speaker cabinet. Working in concert with the
5.25" aluminum driver, the SPFC radiators provide
exceptional bass response from a small volume
cabinet, and when used outdoors, eliminate any
risk of moisture damage to the speakers.
No Compromise Water-resistant
Construction
The sonoma™ Series cabinets are made out of
state-of-the-art glass-lled structural 6/6 nylon,
with a cabinet thickness that is much more robust than other products. This provides the best
“acoustically inert” design on the market today, with “MDF” like performance in a weatherresistant cabinet, and allows us to use mechanical
designs that enhance the overall acoustic performance and eliminates any chance of mechanical
buzz and rattle.
A weather-resistant powder-coated aluminum
grille is utilized to eliminate the possibility of corrosion typically found with standard steel.
Alternate Mounting Options
In addition to the all-in-one bracket, the sonoma™
Series may be mounted using the two rear mounted 1/4-20 inserts that enable the use of custom
mounting brackets for alternative angles or depths
that may be desired. Table top speaker stands are
included for alternate installation places both indoor and outdoor.
Loading...