Condor XC-002 User Manual
Mechanical Key Cutting Machine CONDOR XC-002
CONDOR
Mechanical Key Cutting Machine
XC-002
User Manual
Mechanical Key Cutting Machine CONDOR XC-002
TABLE OF CONTENTS
1）SAFETY PRECAUTIONS AND WARNINGS-----------------------------------------01
2）GENERAL INFORMATION-------------------------------------------02
2.1BRIEF INTRODUCTION---------------------------------------------------02
2.2CHARACTERISTICS------------------------------------------------------02
3）PRODUCT PACKAGING CHECKLIST----------------------------------------------03
4）OVERVIEW
4.1 SCHEMATIC------------------------------------------------------06
4.2 SPECIFICATIONS AND PARAMETERS-----------------------------------------07
4.3 MAIN COMPONENTS AND FUNCTION INSTRUCTION----------------------08
5）MACHINE INSTALLATION AND PREPARATION
5.1 INSTALLING THE MAIN HANDLE--------------------------------------------15
5.2 INSTALLING THE SUB HANDLE---------------------------------------------16
5.3 INSTALLING AND REMOVING PROBE/CUTTER---------------------------17
5.4 CLAMP INSTALLATION---------------------------------------------------18
5.5 PROBE/CUTTER HEIGHT LEVEL ADJUSTMENT----------------------------19
5.6 ROTATION ADJUSTMENT----------------------------------------------------20
6）OPERATING INSTRUCTIONS
6.1 KEY ALIGNMENT--------------------------------------------------21
6.2 SELECTION RULES OF CLAMP SIDES----------------------------------22
7）MAINTENANCE-----------------------------------------------------23
8）WARRANTY AND AFTER SALESSERVICE-----------------------------------------24
9）APPENDIX--------------------------------------------------------------25
Mechanical Key Cutting Machine CONDOR XC-002
1．SAFETY PRECAUTIONS AND WARNINGS
To prevent personal injury or machine damage, users should carefully
observe the instructions in this operation manual and adopt following safety
precautions:
Always operate the machine under a safe condition.
Place the machine on a horizontal surface, which should be firm
enough to carry.
Do not explore the machine to the direct sunlight, or place the machine
in any wet, oily, or dusty area.
Please keep the machine clean and dry, and maintain at least 30cm
distance to the wall for ventilation.
Please wear the safety glasses that meets ANSI standard.
Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving parts.
Do not leave the machine while it is operating, and someone
specifically for monitoring is also required.
Do not place any object on the machine during running.
Must connect to the grounded power outlet, please do not use the
power outlet if it is broken, loosen or with substandard power.
Please unplug the machine during maintenance or it is idle.
Immediately shut down the machine if any exception occurs. The power
switch locates near the power cord connector, at the lower rear part of
the machine.
Please place the machine out of the reach of children.
2．GENERAL INFORMATION
2.1 BRIEF INTRODUCTION
1
Mechanical Key Cutting Machine CONDOR XC-002
Thank you for choosing CONDOR XC-002 Mechanical Key Cutting Machine.
XC-002 Mechanical Key Cutting Machine is a professional device. It enables
locksmiths to copy and process keys more efficiently and accurately for
vehicles or civil use. The careful reading of this manual before use is a quite
crucial precondition for safety. For occasional reference, please keep this
user manual properly.
2.2 CHARACTERISTICS
CONDOR XC-002 Mechanical Key Cutting Machine contains following
characteristics:
Ergonomic design provides better user experience
Aluminum-casting body make it more reliable and durable
Adjustable high-speed motor ensures the stability and fluency of
operation.
Built-in indicator lights make the height level adjustment easier
Cross rail guarantees the accuracy
Supporting track and dimple cutting, that can process special keys
More key types are available because of 4-side rotary clamp
2
Mechanical Key Cutting Machine CONDOR XC-002
3. PRODUCT PACKAGING CHECKLIST
The whole package covers all following items, if missing, please contact your
dealer.
Name Schema Quantity Description
Main body
Upper rubber mat
Multi-functional
clamp
Key alignment block
blade
2.5mm cutter
(Ø2.5×Ø6×40L )
1.5mm cutter
(Ø1.5×Ø6×40L )
Tracer
(Ø 1.5×Ø 2.5×Ø 6×
45L)
1 Key machine body
1
1
1 Use in key alignment
1
1
1
Temporarily carry light
items
Key carrier, can rotates in
four sides
Available for most
mechanical keys
Available for elaborate
cutting
The tool for detection
3
Mechanical Key Cutting Machine CONDOR XC-002
Main handle
Sub-handle
Power cord(1.5m)
Power cord(1.5m)
（optional）
Power cord(1.5m)
（optional）
Power cord(1.5m)
（optional）
Brush
1
1
1
0
0
0
1 For clean
Control the height of
tracer and cutter
Control the position of
working bench
Connect to power outlet
(Chinese Standard)
Connect to power outlet
(British Standard)
Connect to power outlet
(European Standard)
Connect to power outlet
(American Standard)
2.5mm Allen wrench
4mm Allen wrench
Product packaging
checklist
User manual
1
1 Tool to tighten the clamp
1
1
Tool for the installation of
tracer and cutter
Product Delivery
Inspection Certificate
Product Packaging check
Machine installation and
operating instruction
4
Mechanical Key Cutting Machine CONDOR XC-002
Indicator light
adjustment
Sub-clamp
Note：
★ For the product improvement, color, design and structure may be different,
please in kind prevail.
★ The cutter should be replaced timely to maintain the cutting effectiveness.
★
Please use 3A fuse.
4. OVERVIEW
4.1 SCHEMATIC
Main
handle
Sub-handle
Micro-adjuster
Tracer
Main clamp
Limitation knob 1
for height level
Cutter
Rotation speed adjuster
Key tighten knob
Cutting bench
Limitation knob 2
Storage box
5
Mechanical Key Cutting Machine CONDOR XC-002
4.2 SPECIFICATIONS AND PARAMETERS
Input Voltage 220VAC
Input Frequency 50Hz
Power Consumption 200W
MAX 10000rpm
Motor Rotation Speed
1st gear，6000rpm
nd
2
gear，8000rpm
st
gear，torque 0.4N
Motor Torque
Working Temperature 0~50℃
Humidity 10~90%
Travel of Spindle 27mm
Travel of Cutting Bench
Decibel 77dB
Net Weight
1
nd
2
gear，torque 0.3N
Horizontal：38mm
Vertical：50mm
23KG
Gross Weight
28KG
Machine Dimension
Package Dimension
L 298mm×W 445mm×H 525mm
L 595mm×W 550mm×H 375mm
6
Mechanical Key Cutting Machine CONDOR XC-002
525mm
445mm
298mm
MACHINE DIMENSION
7
Mechanical Key Cutting Machine CONDOR XC-002
PACKAGE DIMENSION
4.3 MAIN COMPONENTS AND FUNCTION INSTRUCTION
4.3.1 SUB-HANDLE
Ensure cutting bench’s horizontal movement is in a specified area.
8
Loading...