Concord Camera 1.3 Mega Pixels Camera User Manual
CONTENTS
CONTENTS
ENGLISH ..................................................................................................1
FRANÇAIS ................................................................................................6
ESPAÑOL ................................................................................................11
QUICK START GUIDE
QUICK START GUIDE
This Quick Start Guide provides a quick reference for operating your new digital
camera. Refer to the User’s Guide, which can be found on the CD-Rom and a hard copy
in your Concord Eye-Q Duo LCD box, for detailed instructions on how to use all of your
camera’s features. Before using the camera, make sure to read all safety instructions
and precautions outlined in the User’s Guide.
ENGLISH
FRONT/TOP
1
2
BACK/BOTTOM
8
9
10
11
12
3
1. Shutter Button
4
2. Lug for Neck / Wrist Strap
5
3. Viewfinder
4. Self-timer LED
6
5. Flash
6. Ir Filter and Lens
7
7. Interchangeable Face Plate
8. Power Button
9. Camera Ready LED
10. LCD
11. Cable Connection Panel
12. Tripod Socket
13. Mode Switch
13
14. Navigation Button
14
15. Menu Button
15
16. OK Button
16
17. LCD On/Off Button
17
18. Battery Door
18
1
LOADING THE BATTERIES
The Concord Eye-Q Duo LCD uses 2 LR6 AA batteries.
To load the batteries:
1. Locate the battery door on the bottom of the camera.
2. Slide the button on the battery door toward the center of the camera.
(fig.1.1)
3. Lift the battery door to open.
4. Insert the batteries with the positive terminal toward the + sign, and the
negative terminal toward the - sign. (fig.1.2)
5. Close the battery door.
TURNING THE CAMERA ON AND OFF
When the camera is turned on, the camera ready LED on the back of the
camera blinks and the LCD displays the current settings.
1. Press the Power button.
2. The camera is ready for picture taking when the camera ready LED stops
blinking and LCD icons appear on the LCD. (fig.1.3)
3. To turn the camera off, press the Powe r button.
Note: To change this setting, please refer to the TV Mode section of the User’s Guide for further
instruction.
fig.1.1
fig.1.2
fig.1.3
SETTING THE FLASH
1. In the FLASH menu, press or to choose
between Auto ( A ), Flash ( ), and Flash
Off ( ).
2. Press OK to select the flash mode and press
MENU to exit.
MENÚ PRINC
Modo
Calidad
Flash
WB
Auto
Flash
Flash Off
Main Menu
FLASH
Flash Status Distance from subject
Auto ( A ) 8.5ft (2.5m)and 3.9ft (1.2m).
Flash ( ) 8.5ft (2.5m)and 3.9ft (1.2m).
Flash Off ( ) 3.9ft (1.2m) to infinity
Note: The flash may need time to recharge between photos. While it is charging the camera
ready LED blinks. When it stops blinking you are ready to take another picture. If the batteries
are low, the flash will not work. Insert fresh batteries.
2
TAKING PHOTOS
Mode
Quality
Flash
WB
MAIN MENU
Auto
Flash
Flash Off
Main Menu
FLASH
PRESS SHUTTER TO STOP
1. Set the camera to Camera Mode by moving the Mode Switch to .
2. Position the subject in the viewfinder OR the LCD.
3. Gently press the Shutter button (fig.1.4) and keep the camera still until
the camera ready LED next to the viewfinder flashes. (fig.1.5)
4. When the image has been captured, the camera ready LED next to the
viewfinder begins to blink. This indicates that the image is being
processed.
5. A preview of the image will be displayed on the LCD for 2 seconds after
it is captured and the file counter number displayed in the LCD will be
updated.
TAKING VIDEO CLIPS
OK
1. When Video Clip is highlighted in the MODE menu and press .
2. Press the Shutter button to begin recording a continuous video clip.
3. Press the Shutter button again to stop recording.
4. The camera will continue recording until the memory is full.
OR
5. When the recording is completed, the camera will return to Camera Mode.
Note: If you would like to cancel your video clip session before pressing the Shutter button,
press MENU to exit.
USING THE MMC
In addition to internal memory, the camera features an external memory port that uses a removable
MultiMediaCard (MMC) that allows you to store additional images. When the MMC is inserted, the
camera uses it as its default memory. The stored images and video clips in the internal memory will
be transferred automatically to the MMC, and all photos taken from that point will be stored on it.
When the MMC is removed from the camera, the images will remain stored on the MMC until deleted.
3
fig.1.4
fig.1.5
Inserting the memory card:
1. Locate the battery door on the bottom of the camera.
2. Slide the button on the battery door toward the center of the camera.
3. Lift the battery door to open.
4. Insert the MMC in the direction specified on the card. (fig.1.6)
5. Close the battery door.
NOTE: If an MMC with insufficient memory is inserted, there will only be a partial transfer and
the MMC will be filled. Please insert an MMC with sufficient memory.
fig.1.6
DELETE ONE FILE:
To delete a single file from the
internal memory:
1. Slide the mode switch
towards .
2. Press MENU.
3. When Delete is highlighted in the MAIN MENU, press .
4. When Delete One is highlighted in the DELETE menu, press .
5. The next screen will read "Delete This File?" Press or to highlight No or Yes and press OK to select.
6. If Yes is selected, the file will be deleted.
7. If No is selected, no change will be made.
MAIN MENU
Delete
Thumbnail
Brightness
Exit
Delete One
Delete All
Main Menu
DELETE
DELETE ONE
THIS FILE?
No
Yes
SOFTWARE INSTALLATION
NOTE: Do not connect the camera to your computer before the camera drivers and software
installation is completed.
Installing the Camera Drivers and ArcSoft Applications:
1. Insert the CD-ROM included in your Concord Eye-Q Duo LCD box.
2. The installation screen appears on the computer’s monitor. Follow the software installation
instructions on your screen to install the software.
3. When the CD-Rom installation is finished, connect your camera to the computer to complete installation.
4. Follow the on-screen instructions to complete the installation.
NOTE: If your computer has the CD-ROM automatic installation disabled,click on START. Select
MY COMPUTER and locate the CD-ROM Drive. Double click on the CD-ROM Drive icon to show its
contents. Double-click on the file named SETUP.EXE and follow the instructions on your screen.
SPECIAL FEATURES
PC Video Clips (Window only)
The Concord Eye-Q Duo LCD has the ability to capture video clips on your computer by using the
ArcSoft VideoImpression software. To edit, manipulate or create video clips using all the features
that VideoImpression offers, follow these simple steps.
4
Loading...