Concept Solutions CSLAA User Manual

READ AND SAVE THESE IMPORTANT SAFETY

INSTRUCTIONS BEFORE USING THIS APPLIANCE:

When using an electrical appliance, basic precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Use this appliance only as described in this manual. Other uses not
recommended may cause fire, electric shock or personal injury.

2. This product is intended for household use ONLY and not for commercial
industrial or outdoor use.

3. To protect against electric shock, do not immerse unit, plug or cord in water or
spray with liquids.

4. Close supervision is necessary when any appliance is used by or near children.

5. Unplug the appliance from the outlet when not in use, when moving from one
location to another and before cleaning.

6. To disconnect the appliance, grip the plug and pull it from the wall outlet. Never
pull by the cord.

7. Do not operate the appliance in the presence of explosive and/or flammable
fumes.

8. Do not place the appliance or any of its parts near an open flame, cooking or
other heating appliance.

9. Do not operate the appliance with a damaged cord or plug, if the product
malfunctions, or if it is dropped or damaged in any manner.

10. The use of attachments not recommended by the manufacturer may be
hazardous.

11. Place the unit on a dry level surface.

12. Do not operate if the housing is removed or damaged.

13. A loose fit between the AC outlet (receptacle) and plug may cause overheating
and a distortion of the plug. Contact a qualified electrician to replace loose or
worn outlet.

14. This appliance is designed to be free standing only, and should not be recessed
or built-in (fully recessed).

15. Locate the unit away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight will affect / alter the outside color of the appliance.

WARNING: To reduce the risk of fire, electric shock or personal injury, unplug

or disconnect the appliance from the power supply before servicing.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

Save time and money. Before you call for service, check the Troubleshooting Guide

at the back of this manual. It lists causes of minor operating problems that you

can correct yourself.

WC202-7 Manual.indd 1 8/22/2006 11:15:04 PM

Warning: Changes or modifications to this unit not expressly approved by the
part responsible could void the user’s authority to operate the equipment

Unpacking the unit:

1. Remove the exterior and interior packing.

2. Check to be sure you have all the following parts:

a. One (1) wine bar with Perfect-Temp system
b. One (1) instruction manual
c. Two (2) wireless temperature probes
d. One detachable cord

Finding a good spot for your wine cooler:

• Place your wine bar on a flat surface that is strong enough to support it when

fully loaded.

• Allow 5 cm of space on the back side of the wine cooler to allow proper

ventilation.

• This wine cooler is designed to be free standing only, and should not be

recessed or built-in (fully recessed).

• Do not place any objects on top of the unit.

• Do not locate the unit in a moist place.

• The unit’s cooling system operates efficiently with an ambient temperature of

less than 21°C.

• Do not locate the wine bar in direct sunlight.

• ALWAYS REMOVE ALL BOTTLES BEFORE MOVING THE WINE

COOLER

A

B

C

D

E

A - Probe A (Left Zone)
B - Probe B (Right Zone)
C - Left Zone Wine Type Button
D - Right Zone Wine Type Button
E - Power Button

WC202-7 Manual.indd 2 8/22/2006 11:15:05 PM