Page 1
MS15040903R2
CFD-105 / CFD-105M
CFD-135 / CFD-135M
Page 2
Screencast Setup Quick Guide: (Only for CFD-135M)CFD-105M/
21
20
19
17
18
Color
OSD
Function
Sound
Page 3
21
0
1024
600
CFD-105 / CFD-105M
CFD-135 / CFD-135M
16.2 6.5
18.1
13.8 6.7
14.6
Page 4
20
14℉-120℉.
175℉
This can cause damage to the
10 ft.
Page 5
19
Begin by hooking the areas indicated below and press the Shroud/Screen
back over the pod
Page 6
18
Page 7
ACC
17
Page 8
FM
1. Color
Brightness/Contrast/Saturation
2. OSD
Language/H Position/V Position/
OSD Timeout/Transparent
3. Function
4. Sound
Reset: Return to factory settings
Scale: Screen display 19:9 and 4:3
Volume: Speakers Volume range 1-100
(The bulit-in speakers operate only when
the FM and IR is turn off)
IR: Dual channels(A or B) can be selected
or turned off
Note: Concept Screencast products are compatible with Android 4.2 and
up as well as Apple iOS7 and up. This serves as a general guide only. All
of the steps above will vary depending on the exact phone that you have.
Please refer to the phone's user manual as an additional resource.
16
Screencast Setup Quick Guide: (Only for CFD-135M)CFD-105M/
FM
Off
Page 9
(0000)
16. Slide your finger from the bottom of the screen
up as shown below towards the bottom right.
17. Tap on “AirPlay” towards the bottom.
15
18. You are now connected and your display will be
mirrored over to your larger LCD display.
Screencast Setup Quick Guide: (Only for CFD-135M)CFD-105M/
Page 10
14. Tap on “Wi-Fi”.
15. Look for “HL-Link ***” as shown on the screen
and select it.
14
Screencast Setup Quick Guide: (Only for CFD-135M)CFD-105M/
Page 11
10
13
10. The following screens will appear as the devices proceed to connect:
11. Once you see the screens below, you have successfully connected.
ID:HL-Link 001
PBC / pin code : 61161661
Wi-Fi Direct connecting…
ID:HL-Link 001
PBC / pin code : 61161661
Wi-Fi Direct Succeed,wate IP…
12. You can now listen and view all content displayed on your Android
device on your new larger LCD display as well.
13. For iPhone,Tap on “Settings” on your iPhone.
Screencast Setup Quick Guide: (Only for CFD-135M)CFD-105M/
Page 12
1. Press “Power” button to power on unit.
11
2. Press “DATA/MODE” until “WiFI DISP” appears at top left of screen.
3. As this boots up, you will see “WiFi Display Dongle” come on the screen.
4. Wait until screen below appears:
5. For iPhone, skip to step 13.
6. For Android devices, go to your phone settings:
Screencast Setup Quick Guide: (Only for CFD-135M)CFD-105M/
7. Select the “Connections” tab at the top.
8. Scroll to the bottom and tap on “Screen Mirroring”.
9. Look for the device with the matching address and tap on it.
Note: The term used for “Screen Mirroring” as well as the steps to get
to this setting may vary from phone to phone. Please refer to your
smartphone’s user manual, if necessary.
12
Screencast Setup Quick Guide: (Only for CFD-135M)CFD-105M/
Loading...