Conair XT10TC, XT10WTCSC Instructions For Use Manual

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially
when children are present, basic safety pre­cautions should always be taken, including
the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER–Any appliance is electrically

live, even when the switch is off.

To reduce the risk of death or injury by
electric shock:

1. Always unplug appliance from electrical
outlet immediately after using (except
when charging unit).

2. Do not place or store appliance where it
could fall or be pulled into a tub or sink.

3. Do not use appliance while bathing or in
the shower.

4. Do not place appliance in, or drop into,
water or other liquid.

5. If appliance has fallen into water, do not
reach for it. Unplug immediately.

6. Unplug this appliance before cleaning.

DO NOT REACH

INTO THE WATER

WARNING–

To reduce the risk
of burns, electric shock, fire, or injury to
persons:

1. Never leave a plugged-in appliance
unattended.

2. Close supervision is necessary when

Conair wants to thank you for
choosing our beard/mustache

trimmer. We know it will

provide you with years of service.

Pivoting Head

Beard & Mustache

TRIMMER

®

Model XT10TC/XT10WTCSC

l’ajustement des lames. Si vous faites

réparer la tondeuse, assurez-vous que

les deux lames sont affûtées ou

remplacées en même temps. Pour

Pour obtenir de meilleurs résultats, les

poils devraient être légèrement humides

(PAS MOUILLÉS) quand vous utilisez la

tondeuse. Vous éviterez ainsi de couper

TAKING CARE OF

YOUR TRIMMER

OILING THE BLADES

About once a month you should oil the
trimmer blades with the oil provided in
your kit. It is best to do this over a piece of
newspaper. Turn the trimmer on and hold
it so that the blades are pointed downward.
Spread one drop of oil across the blades,
then turn the trimmer off and wipe away
the excess oil with a soft cloth.
Be careful not to use too much oil and
don’t oil your trimmer more than neces­sary, as that could damage the motor.
(Never attempt to oil the motor bearing as
it is permanently lubricated.) After oiling
the blades, return the trimmer and oil
packet to the trimmer storage base.

BLADE CARE

Because the trimmer blades are precision­made for a very special use, they should
always be handled with care. Each time
you finish using the trimmer, take the
cleaning brush provided and brush away
any loose hair that has collected in the
blades. Then store the trimmer in its
recharging storage base to protect the
blades until the next use.
Be especially careful when changing or
adjusting blades. When you have your
trimmer serviced, be sure that both blades
are sharpened or replaced at the same time.
To promote the long life of the appliance,
use your trimmer only for the purpose
intended by the manufacturer—to trim
your beard and mustache.

TURBO FEATURE

This product is equipped with a turbo
boost button. When activated, this feature
will provide 15% more cutting power. This
is especially useful for cutting through
thicker hair.
To activate the turbo feature:

1. Turn the Power switch to the “on”
position

2. Press the Turbo button

3. Continue to press the Turbo button for
as long as you need the extra power

4. Release the Turbo button to return to
normal power

GROWING A BEARD AND
MUSTACHE

There are three key factors that will
determine which beard or mustache style
is best for you:

1. The shape and dimensions of your face.

2. The natural growth of your
beard/mustache.

3. The thickness of your beard/mustache.
If you are unsure of the type of beard or
mustache that would most suit your face,
speak with a professional hair stylist and
ask for an opinion on what style would be
best. Once your beard or mustache has
been styled, it is essential that you
maintain its appearance. To do this,
use your trimmer to trim your beard/
mustache weekly.
For the best trimming results, your beard
should be slightly damp (NOT WET) when
using your trimmer. This will prevent the
trimmer from removing more hair
than desired.

DIRECTIVES IMPORTANTES

1. Ne laissez jamais un appareil branché

sans surveillance.