Conair Weight Watchers WW73C Instructions For Use Manual

Weight and Body Fat - How does it work?
While body fat can be measured in many ways, the method used in your scale is bioelec­trical impedance. This indirect method of determining body fat starts when a safe and very low electrical current is sent through the lower half of the body. The electrical current flows more quickly through water and muscle than it will through bone and fat. The scale measures the speed of the current. Based on this number, the scale estimates body fat using a multi-step, mathematical formula.
Is it accurate?
Measurements of body fat tend to fluctuate a lot more than simple weighing, and dif­ferent methods of estimating body fat yield very different results. Just as different scales give different results, different body fat analyzers can provide very different body fat estimates. Even with the same scale the numbers will vary because:
• Weight loss tends to produce substantial, continuous, and unpredictable changes in body water content. Because body fat analysis is determined by water content in the body, results can vary considerably from day to day.
• Hydration status affects body fat results. If you’ve just worked out, there is less water for the electrical current to flow through. This may result in a higher body fat result. In the same way, if you measure your body fat after drinking a lot of fluid, it may appear that body fat is lower than it really is.
• Skin temperature can have an influence also. Measuring body fat in warm humid weather when skin is moist will yield a different result than if skin is cold and dry.
• As with weight, it is better to track trends over time than to use individual daily results, when your goal is to change body composition.
• Results may not be accurate for persons under the age of 16, or persons with an elevated body temperature, diabetes or other health conditions.
What you need to know!
• Percent body fat refers to the number of pounds of fat divided by your total body weight and multiplied by 100.
• During weight loss, percent body fat doesn’t appear to be reduced as quickly as expected because total weight loss and total body fat are decreasing at the same time (for a more detailed explanation, see next section).
• Weight loss in the form of body fat and lean tissue (muscle) is common, and is normal.
• To minimize the loss of lean tissue, include regular physical activity, especially strength training, in your weight loss plan.
Why do I lose weight but my body fat percentage doesn’t change much?
Most body fat monitors show body fat as a percentage only. This body fat monitor shows you not only a percentage but the actual number of body fat pounds (in fact, this is the measurement you see after your weight is displayed). Why is that important? When you lose weight, both the numerator (pounds of body fat) and denominator (total body weight) go down, so when it’s calculated as a body fat percentage, the number can be small. For example, a person may weigh 200 pounds and have 40% body fat (= 80 pounds of body fat). He/She loses 20 pounds, but the body fat has only dropped 4% to 36%. That 4% of body fat was 16 pounds of fat – a very significant amount! So do not be overly concerned if you do not see the percentage change quickly as you are losing weight: monitor the absolute number of body fat pounds lost. Remember, to minimize the loss of lean tisse, include regular physical activity, especially strength training, in your weight loss plan.
BMI
BMI stands for Body Mass Index, a statistical term derived from height and weight. It is closely linked to body fat and health outcomes. Over 50 organizations, including the US Government and the World Health Organization, have adopted BMI guidelines. BMI is inversely related to fitness, meaning that the higher you BMI, the less likely you are to be fit. Every time your body fat monitor reads your weight and calculates your body fat, it also calculates your BMI. Along with you weight and your body fat measurements, the BMI reading gives you yet one more tool to monitor your health and fitness.
General guidelines for BMI are as follows: BMI less than 19: underweight BMI 19-25: healthy weight BMI 25-30: overweight BMI over 30: obese
BMI Levels
In order to make your body fat and body water readings more accurate, your monitor automatically calculates a BMI Level for you, based on the personal data you have entered, as well as measurements the scale takes. Why is that important?People with different BMIs have differences in muscle mass and body water levels. Do not be alarmed if you do not see rapid changes to your category level: generally, your level will change as you lose weight and become more fit. These changes happen gradually, though, and you may not see them reflected for a few months of consistently following a diet and exercise regimen.
Make the most of it!
To summarize, make the most of the body fat analysis feature by:
• Tracking change over time and not day to day.
• Using the same scale as much as possible.
• Being extra-consistent in the time of day, day of the week, time before or after food and fluid consumption, before or after exercise, etc., when measuring body fat composition.
Always keep in mind that you know your body best. The following ranges of Body Fat Percentages are offered as guides:
Healthy Range of Body Fat Age Females Males
Percentage Body Water/Hydration Levels:
According to the World Health Organization (WHO, 2001), the percentage of body water should lie within the following ranges:
Women: 50-55% Men: 60-65% Children: 65-75%
While a scale/body fat monitor can be a useful tool on your weight-loss journey, it’s not in and of itself a program for losing weight. Studies show that people lose three times more weight on Weight Watchers than they do on their own.*
Age Female Males
18-39 21-32% 8-19% 40-59 23-33% 11-21% 60-79 24-35% 13-24%
Service Centre:
Conair Consumer Products Inc. 156 Parkshore Drive, Brampton, Ontario. L6T 5M1 Made in China Consumer Call Centre E-mail: Consumer_Canada@Conair.com
1-800-472-7606 www.conaircanada.ca
*Heshka S, et al. Two-Year Randomized Controlled Study of Self-Help Weight Loss vs. A Structured Commercial Program. The FASEB Journal 2001; 15(4):A623
©2006 Weight Watchers International Inc. All rights reserved. Weight Watchers is the registered trademark of Weight Watchers International Inc. and used under license.
IB-7168
06CN1351
Scales by
Instructions
for use of
Weight Watchers
bathroom scale
Congratulations! By purchasing this Weight
Watchers Scale, you’ve made the first step toward taking control of your weight. To get the greatest benefit from your purchase, please read
this entire brochure before using your scale.
Model #WW73C
Important Information Concerning
Weight Management
Your Scale is the best tool for monitoring weight. While not the only measure of weight loss, scales are the most popular method used to gauge weight-loss success. A scale measures the sum of your total body weight, which includes bone, muscle, fat, and water.
Body weight fluctuates during the day, and from day to day, depending on a variety of factors.
• Salt and carbohydrate intake can affect the body’s water retention.
• A large meal adds weight and can cause water retention.
• Dehydration from exercise, illness, or low fluid intake can result in weight loss.
• Muscle is also a factor. Heavy-duty resistance training can build muscle, which can affect weight.
• The menstrual cycle can cause temporary weight gains and losses.
When You’re Losing Weight
a single number.
Don’t Overdo It!
A surefire way to get overly concerned with your weight is to weigh yourself too often. We generally recommend weighing yourself no more than once a week when you’re dieting. Though it’s hard to stick to this pattern, it’s the best way toprevent unnecessary concern with normal weight fluctuations, which are unrelated to your weight-loss ef­forts. Regardless of your weighing habits, it’s important that you’re consistent.
Here are 5 rules for effectively monitoring your weight – weigh yourself:
To keep track of your weight, record only one number for the week. This will give you a clear picture of any trend your weight is following.
When You’re Maintaining Weight
Fluctuations in day-to-day weight tend to be smaller when weight is stable, so a more frequent weigh-in pattern is helpful. To maintain a stable weight:
• Weigh yourself more often than once a week.
• Use the “5-pound rule” – research shows that people who keep weight within a 5-pound range are more likely to maintain a healthy body weight over the long term.
Before Using Scale
1. Set switch on the base of scale to measure in kg (kilograms) or lb (pounds).
2. Set scale on floor. Surface must be level for accurate operation and safety.
Customizing Your Weight Watchers® Body Fat Monitor
1. Tap center of scale platform with foot to activate digital display.
2. Wait for “0.0” to appear in display window.
3. You are now ready to input your personal data. Firmly press the SET button located below the display.
Enter User Number
• P-01 will flash in display window.
• Press UP or DOWN arrows to select your individual user number (Ten user numbers available: P-01 through P-10).
• When selected user number appears in display, press SET button to save user number.
• The scale is now ready for you to enter your height.
Set Height
• “Ht” (height) will flash in display window.
• Press UP or DOWN arrows to scroll to your height measurement.
• Press SET button to save height.
• The scale is now ready for you to enter your age.
Set Age
• “Age” will flash in display window.
• Press UP or DOWN arrows to scroll to your age.
• Press SET button to save age.
• The scale is now ready for you to enter your gender.
Set Gender
• The gender icons will flash in display window.
• Press UP or DOWN arrows to select male or female icon.
• Press SET button to save gender.
4. Your personal data has now been entered and stored. User number will display for 2 seconds, height for 2 seconds and age for another 2 seconds, to confirm the programming. If any of these data points were set incorrectly, just go through the customization steps (1–3) again. The scale is now ready for you to weigh yourself and read body fat, body water and BMI measurements.
Using Your Weight Watchers® Body Fat Monitor
Precautions for Use CAUTION! Use of this device by persons with any electrical implant such as a heart pacemaker, or by pregnant women, is not recommended.
1. Tap center of scale platform with foot to activate digital display.
2. Wait for “0.0” to appear in display window.
3. Firmly press the USER button located below the display several times until your user number appears. Note: The scale will automatically scroll through your customized data, then “0.0” will be displayed.
4. Step onto the scale BAREFOOT, making sure the balls of your feet cover both metal plates.
5. Weight will be displayed for 3 seconds. Remain on scale without moving!
6. Display will flash “b” and your BMI value.
7. Display will flash “L” and your BMI level.
8. Display will flash “bf” and “lb” or “kg”, followed by the weight of your body fat.
9. Display will flash “bf” and “%”, followed by your body fat percentage.
10. Display will flash “H2O” and “%”, followed by your body water percentage.
11. Display will automatically turn off.
Please read on for further information on Body Fat, Body Water, BMI, and BMI levels.
Using The Weight-Only Mode
For weight-only mode, no personal data entry is necessary.
1. Place scale on a flat, level surface.
2. Tap center of scale platform with foot to activate.
3. Wait for “0.0” to appear in display window.
4. Step onto scale. Weight measurement will appear in display window.
Facts You Should Know
Your Weight Watchers scale is a precise measuring instrument that is most accurate when weighing a stationary object. To ensure readings that are 99% accurate, always try to stand on the same area of the scale platform and DO NOT MOVE. Should the weight on the scale exceed the scale’s capacity, you may see an error message ”ERR”.
Electronic sensors are sensitive. Be careful not to drop or jar the scale. Place it gently onto floor surface, and store where it will be protected from impact. The scale is an electronic instrument and should never be submerged in water. Clean with damp cloth and/or glass cleaner.
In the unlikely event that the scale battery malfunctions and needs to be replaced, lift the snap-on battery cover on the bottom of the scale and replace the old battery with a 3V lithium battery (CR2032). Dispose of the old battery properly. Do not attempt
to open the scale or to remove any components. Servicing should be done by qualified technicians only. See warranty information.
• Once a week, on the same day of the week
• At the same time of day
• In the same place
• Wearing the same clothes
• Using the same scale
LIMITED TEN YEAR WARRANTY
To obtain service under this warranty, return the defective product to the service centre, together with your sales slip and $7.50 for postage and handling.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120 MONTH DURATION OF THIS WARRANTY.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.
This warranty gives you specific legal rights, and you may also have other rights which vary from province to province.
Loading...