Conair WCR450 User Manual

ALARM CLOCK/

CHARGING STATION

WITH BLUETOOTH®

RÉVEIL/STATION DE CHARGE

AVEC TECHNOLOGIE BLUETOOTH

USER MANUAL

MANUEL D’UTILISATION

WCR450

For your safety and continued enjoyment

of this product, always read the

instruction book carefully before using.

Aﬁn que cet appareil vous procure en toute sécurité

beaucoup de satisfaction, lire attentivement le mode

d’emploi avant de l’utiliser.

IMPORTANT

SAFEGUARDS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean with a dry cloth only.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades, with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tipping-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.

16. Keep a minimum distance of 4 inches around the apparatus for sufﬁcient ventilation.

17. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc.

18. Attention should be drawn to the environmental aspects of battery disposal.

19. The apparatus should only be used in moderate climates.

WARNING

To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.

*Caution: Markings and ratings plate are located at bottom enclosure of the apparatus.

The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated, dangerous voltage within the product’s enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

The apparatus shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as vases, shall be placed on apparatus.

Battery shall not be exposed to excessive heat such as sunshine, ﬁre or the like.

An appliance with a protective earth terminal should be connected to a mains outlet with a protective earth connection.

No naked ﬂame sources such as lighted candles should be placed on the apparatus.

Introduction

Thank you for purchasing Luna by ConairTM. Please be sure to read this User Manual carefully to ensure proper installation and usage.

The information in this document is subject to change and does not represent a commitment on the part of Conair Corporation. No part of this document may be reproduced, transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated into any language for any purpose other than the purchaser’s personal use, without the written permission of Conair.

Product Features

• Combination Bluetooth Speakers, Power Outlets

& Alarm

• Bluetooth Music Play-Through

• User-Friendly Alarm Clock with Single-Day

Alarm Option

• Convenient Connections for

AC- and USB-Powered Devices

• Display Dimmer – 7 Levels and OFF

• Auto Update for Daylight Saving Time

Product Description

• Bluetooth Speakers with Passive Radiator

• 2 AC Outlets

• 2 USB Charging Ports (shared 5V 2.4A max.

with smart detect)

• Single-Day Alarm Clock Option

WCR450

Unpacking and Setup:

1. Carefully remove from packaging. Verify that

you have all necessary components before you dispose of display carton.

Component List:

• WCR450 Main Unit

• Cable Clamp

• 2 Wood Screws

2. Place in desired location.

NOTE: This product is designed to be used on a level, ﬂat surface such as a table, desk, shelf or stand with convenient access to an AC outlet, and away from direct sunlight and sources of excessive heat, dust, moisture and vibration.

3. Plug unit directly into a wall AC outlet. Do not

plug into a surge protector or an extension cord.

4. Secure cord with C-clamp to back of nightstand

or desk. Wood screws are included.

Setting the Time:

1. Press and hold SNOOZE and butto n f or

4 seconds.

2. Hour will begin to ﬂash. Adjust by

pressing Press SET button to select.

3. Minute will begin to ﬂash. Adjust

by pressing Press SET button to select.

4. Month will begin to ﬂash.

Adjust by pressing

Press SET button to select.

or buttons.

buttons.

5. Day will begin to ﬂash.

Adjust by pressing or

buttons.

Press SET button to select.

6. Year will begin to ﬂash.

Adjust by pressing

buttons.

Press SET button to select.

Setting the Alarm

1. Press and hold SET button to set alarm.

2. Hour will begin to ﬂash. Adjust

by pressing or buttons.

Press SET button to select.

(Alarm will automatically set to last selected alarm time after 9 seconds.)

3. Minute will begin to ﬂash. Adjust by pressing

or buttons.

Press SET button to select. (Alarm will automatically set to last selected alarm time after 9 seconds.)

4. Press SET button to toggle alarm ON/OFF. In

Single-Day Alarm ON Mode: Alarm time will reset to 6:00 a.m. with every activation of the alarm.

In Single-Day Alarm OFF Mode: The alarm time will default back to the last set alarm time with every activation.

Bluetooth® Pairing

1. Open the Bluetooth® setting on your device.

2. Press the Bluetooth® button.

3. The Bluetooth® ﬂashes and

Luna by Conair becomes discoverable.

4. Connect your device to Luna by Conair.

5. Luna will make an audible tone when connected

successfully.

TheBluetooth® word mark and logos ar e registered trademarks owned by the Bluetooth SIG, Inc. and any use of such mark s by Conair Corporation is under license. Other tr ademarks and trade names are those of t heir respective owners.

Volume Control

Press or buttons to adjust the volume.

Secure Battery Door/Hidden Switches

Single-Day Alarm (Preset to ON)

ON: Alarm time will reset to 6:00 a.m. with every activation of the alarm.

OFF: The alarm time will default back to the last set alarm time with every activation.

Daylight Saving Time (Preset to AUTO)

AUTO: Time will automatically update +1 or -1 hour based on the preset Daylight Saving Time Calendar. Year, Month and Day must be set correctly for this feature to work properly.

OFF: Time will not automatically update for Daylight Saving Time. Any changes to the time must be manually updated.

AUTO OFF

1.5V AAA SI ZE

DST

SINGLE DAY ALARM

ON OFF

Backup Battery Function

If the AC supply is interrupted, the internal clock will not be interrupted due to battery backup. The backup battery will not support the alarm settings or any other features of the unit.

Other Features:

Dimmer Control

When in standby mode, press or buttons to change brightness (7 levels of brightness). When the display is turned off, the user can also press any button to turn display on.

Snooze

When alarm is sounding, press the SNOOZE button to go into snooze mode. The alarm symbol will ﬂash and the alarm will re-sound after 9 minutes.

Gradual Awake

Alarm will sound at a low volume and gradually increase to a higher volume.

Battery Handling and Usage:

WARNING: Only adults should handle batteries. Do not allow a child to use this product unless the battery compartment cover is securely attached to the battery compartment in accordance with all product usage instructions.

• Follow the battery manufacturer’s safety and

usage instructions.

• Keep batteries away from children and pets.

• Do not mix a new and a used battery or mix

batteries of different types or sizes.

• Insert the batteries according to the proper

polarity (+/-) as indicated inside the battery compartment. Failure to properly align the battery polarity can cause personal injury and/or damage to the unit.

+ 19 hidden pages