Conair TH313 User Manual

WOMEN

age excellent good moderate overweight obese

<19 17.0 17.1 to 22.0 22.1 to 27.0 27.1 to 32.0 >32.1

20-29 18.0 18.1 to 23.0 23.1 to 28.0 28.1 to 33.0 >33.1

30-39 19.0 19.1 to 24.0 24.1 to 29.0 29.1 to 34.0 >34.1

Bone Mass – What Is It?

TH313

Bone is a living, growing tissue. During youth, your body makes new bone tissue faster than it breaks down older bone. In young adulthood, bone mass is at its peak; after that, bone loss starts to outpace bone growth, and bone mass decreases. But it’s a long and a very slow process that can be slowed down even more through calcium-rich diets and weight-bearing exercise.

40-49 20.0 20.1 to 25.0 25.1 to 30.0 30.1 to 35.0 >35.1

> 50 21.0 21.1 to 26.0 26.1 to 31.0 31.1 to 36.0 >36.1

Body Water/Hydration Levels

General health standards indicate that one should consume approximately 64 oz. of water per day to maintain a healthy level of hydration. According to the World Health Organization (WHO, 2001), the percentage of body water should lie within the following ranges:

Women: 50-55% Men: 60-65% Children: 65-75%

Maintaining these levels will help improve your overall health and general feeling of well-being. If your hydration levels are less than the recommended levels in the chart above, you should increase your water intake accordingly.

Body Water/Hydration Level – how is it measured?

The hydration level is measured by using Bioelectric Impedance Analysis (BIA). The same analysis that is used to calculate your body fat is used to calculate your hydration level. The Thinner Body Water microprocessor again measures impedance or transmission speed through water. Taking into consideration a user’s age and gender, a calculation is made that determines the percentage of water.

Please Note: It is not recommended to take the hydration measurements in certain situations, such as following exercise, after drinking a glass of water, or directly prior to, during, or shortly after menstrual cycles. Hydration may not be at its normal level during these times. If you have any questions or concerns about your readings, contact your healthcare provider.

Who should monitor bone mass?

Most people have no need to monitor bone mass, but certain groups – postmenopausal women, men and women with certain diseases, and anyone who takes medications that affect bone tissue might want to watch for any decrease in bone mass.

How to monitor bone mass at home

Program your Thinner® Body Analysis Monitor and watch as built-in BIA technology computes lean body mass and measures bone mass every time you weigh yourself.

Typical ranges for bone mass:

Men: 6.5-8.5% Women: 5-7%

The bone mass reading is to be used as a guide only. Watch for trends over time and contact your healthcare provider for a more detailed explanation of the readings, and with any questions or concerns.

Service Centers

Conair Corporation Service Department 150 Milford Road East Windsor, NJ 08520

Conair Corporation Service Department 7475 N. Glen Harbor Blvd. Glendale, AZ 85307

1-800-326-6247 www.conair.com

The Scale with Built-In Power

Instructions for use of

Thinner Bathroom Scales

Congratulations! By purchasing this Thinner scale, you’ve made the first step toward taking control of your weight. To get the greatest benefit from your purchase, please read this entire brochure before using your scale.

06AD15055

IB-6910

INSTRUCTIONS FOR USE

Before Using Scale

1. Set switch on the back of the scale to measure in kg (kilograms) or lb (pounds).

2. Set scale on floor. Surface must be level for accurate operation and safety.

Customizing Your

Thinner® Body Analysis Monitor

Setting Data for Body Fat/Hydration/Bone Mass Measurement

1. Tap center of scale platform with foot to activate digital display (display

will flash).

2. Wait for "0.0" to appear in display window.

3. Press SET button. The scale is now ready to input your personal data.

Enter User Number

• "P-01" will flash in display window.

• Press UP or DOWN arrows to select your individual

user number (four user numbers available: P-01 through P-4).

• When selected user number appears in display,

press SET button to save user number.

• The scale is now ready for you to enter your height.

Set Height

• "Ht" (height) will flash in display window.

• Press UP or DOWN arrows to scroll to your

height measurement.

• Press SET button to save height.

• The scale is now ready for you to enter your age.

Set Age

• "Age" will flash in display window.

• Press UP or DOWN arrows to scroll to your age.

Press and hold button to advance numbers more quickly.

• Press SET button to save age.

• The scale is now ready for you to enter your gender.

Set Gender

• The gender icons will flash in display window.

• Press UP or DOWN arrows to select male or

female icon.

• Press SET button to save gender.

Your personal data has now been entered and stored. User number will display for 2 seconds, height for 2 seconds, and age for 2 seconds, to confirm the programming. If any of these data points were set incorrectly, just go through the customization steps (1–3) again. The scale is now ready for you to weigh yourself and read body fat, body water, and bone mass measurements.

Using Your Thinner® Body Fat Monitor

Precautions for Use CAUTION! Use of this device by persons with any electrical implant such as

a heart pacemaker, or by pregnant women, is not recommended.

1. Tap center of scale platform with foot to activate digital display (display will flash).

2. Wait for "0.0" to appear in display window.

3. Firmly press the USER button located below the display several times until your user number appears. Note: The scale will automatically scroll through your customized data, then "0.0" will be displayed.

4. Step onto the scale BAREFOOT.

5. Weight will be displayed for 3 seconds. Remain on scale without moving!

6. Display will flash “bf” and “%”,

followed by your body fat percentage.

7. Display will flash “H2O” and “%”,

followed by your body water percentage.

8. Display will flash "bone" and "%" followed by your bone mass

percentage.

9. Display will cycle through your measurements again and then automatically turn off.

Using The Weight-Only Mode

For weight-only mode, no personal data entry is necessary.

1. Place scale on a flat, level surface.

2. Tap center of scale platform with foot to activate (display will flash).

3. Wait for "0.0" to appear in display window.

4. Step onto scale. Weight measurement will appear in display window.

Facts You Should Know

Your Thinner® scale is a precise measuring instrument that is most accurate when weighing a stationary object. To ensure readings that are 99% accurate, always try to stand on the same area of the scale platform and DO NOT MOVE. Should the weight on the scale exceed the scale’s capacity, you may see an error message ”ERR”.

Electronic sensors are sensitive. Be careful not to drop or jar the scale. Place it gently onto floor surface, and store where it will be protected from impact. The scale is an electronic instrument and should never be submerged in water. Clean with damp cloth and/or glass cleaner.

In the unlikely event that the scale battery malfunctions and needs to be replaced, lift the battery cover on the bottom of the scale and replace the old battery with a 3V lithium battery (CR2032). Dispose of the old battery

properly. Do not attempt to open the scale or to remove any components. Servicing should be done by qualified technicians only. See warranty information below.

LIMITED TEN YEAR WARRANTY

Conair will repair or replace, at our option, your appliance free of charge for 120 months from the date of purchase if the appliance is defective in workmanship or materials.

To obtain service under this warranty, return the defective product to the service center listed below that is nearest you, together with your sales slip and $5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a receipt, the warranty period shall be 120 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120 MONTH DURATION OF THIS WARRANTY. Some states do not

allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow

the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

This comprehensive digital scale provides all the information you need to manage your weight and monitor important body analysis functions – all with the touch of your toes! It measures weight, body fat, body hydration level, and bone mass with precision accuracy, and can be programmed for the entire family (up to 4 users). Simple to use, with a large and easy-to-read digital LCD screen, it’s the ultimate home scale for healthy weight management.

Body Fat Percentage – What Does It Mean?

Simply speaking, your body is made up of lean mass and fat mass. Lean mass consists of muscle, bones, organs, etc. Fat mass is body fat. While everyone needs a certain amount of fat to assist the body in storing energy, providing heat insulation and other functions, most people will find they are at their most fit when they increase their lean mass and decrease their fat mass.

While standard scales are useful in providing a measurement of overall weight, they do not calculate the percentage of fat within the body. However, this Thinner® Body Analysis Monitor allows the user to check both of these important measurements.

Body Fat Percentage – How is it Measured?

The Thinner® Body Analysis Monitor uses a technique called Bioelectric Impedance Analysis (BIA). A harmless amount of a bioelectric current is sent from the footpads through the body. This current travels at different speeds through lean and fat body masses. The scale’s microprocessor analyzes the degree of impedance, or transmission speed.

Taking into consideration the user’s height, age, gender and weight, the Thinner® Body Analysis Monitor calculates the composition of the body. The percentage of the body that is composed of fat is displayed on the monitor – “body fat percentage.”

Body Fat Levels – Recommended Ranges

MEN

age excellent good moderate overweight obese

<19 12.0 12.1 to 17.0 17.1 to 22.0 22.1 to 27.0 >27.1

20-29 13.0 13.1 to 18.0 18.1 to 23.0 23.1 to 28.0 >28.1

30-39 14.0 14.1 to 19.0 19.1 to 24.0 24.1 to 29.0 >29.1

40-49 15.0 15.1 to 20.0 20.1 to 25.0 25.1 to 30.0 >30.1

> 50 16.0 16.1 to 21.0 21.1 to 26.0 26.1 to 31.0 >31.1