LIMITED TWO YEAR WARRANTY
Conair will repair or replace (at our option)
your unit free of charge for 24 months from
the date of purchase if the appliance is defective in workmanship or materials.
To obtain service under this warranty, return
the defective product to the service centre
listed below that is nearest you, together
with your purchase receipt and $5.50 for
postage and handling. In the absence of a
purchase receipt, the warranty period shall
be 24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE 24 MONTH DURATION
OF THIS WRITTEN, LIMITED WARRANTY.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER.
This warranty gives you specific legal rights,
and you may also have other rights, which
vary from province to province.
Service Center:
Conair Consumer Products Inc.
156 Parkshore Drive,
Brampton, Ontario. L6T 5M1
1-800-472-7606
www.conaircanada.ca
©2005 CONAIR CONSUMER PRODUCTS INC.
04CN1442
IB-5750
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING.
KEEP AWAY FROM WATER
DANGER —
Any appliance is
electrically live even when the switch is
off. To reduce the risk of death by electric
shock:
1. Always unplug it immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or
other liquid.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING —
To reduce the risk
of burns,
electrocution, fire, or injury to
persons:
1. This appliance should never be left
unattended when plugged in.
2. Do not pull, twist, or wrap line cord
around appliance.
3. This appliance should not be used by,
on or near children or individuals with
certain disabilities. Use could result in
fire or personal injury.
4. Use this appliance only for its intended
use, as described in this manual. Do not
use attachments not recommended by
the manufacturer.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped or
damaged, or dropped into water. Return
the appliance to an authorized service
center for examination and repair.
6. Keep the cord away from heated surfaces.
7. Do not pull, twist, or wrap line cord
around appliance, even during storage.
8. Never place the appliance on a soft surrface, such as a bed or couch, where the
air openings may be blocked.
9. Do not use outdoors or operate where
aerosol (spray) products are being used
or where oxygen is being administered.
10. Never drop or insert any object into any
opening or hose.
11. Do not place the heated unit directly
on any surface or on the appliance
cord while it is hot or plugged in.
12. This straightener is hot when in use. Do
not let eyes or bare skin touch heated
surfaces.
13. Do not use an extension cord with this
appliance.
14. Before plugging in read the information
about dual voltage contained in the
instruction section of this manual.
15. Do not attempt to touch the housing of
your appliance near the straightening
plates as it is hot when in use.
slide out. Repeat process on additional
sections of hair until you achieve the hair
style you desire. It may be necessary to
repeat process on certain areas, depending
on the texture of your hair or how damp it
is.
NOTE: Please refer to the temperature
setting guide for heat settings, especially
if using your iron on wet hair.
Some experience is necessary when learning
to use this straightening iron. After using iron
several times, you will learn the ideal way to
straighten and style your hair easily.
STYLING WITH THE NEW CERAMIC
TECHNOLOGY EASY-GLIDE
CERAMIC-COATED PLATES
The plates of your new straightening iron
have an Easy-Glide ceramic-coated surface,
the newest technology.
This means it’s not only simpler to clean
off styling product residue after each use,
but you’ll also find that hair glides easily
over the surface of the plates as you’re
straightening.The ceramic-coated surface
also helps smooth down flyaways and
frizzies. As you smooth each strand, heat
is evenly distributed so that the style you
create has a salon-perfect, silky smooth,
shining finish. Hair slips right off the
plates after it’s straightened.
The new ceramic technology is a pleasure
to work with because it makes styling
your hair easier and the results more
professional.
USING INSTANT HEAT, THE 25 WET-DRY
VARIABLE TEMPERATURE SETTINGS &
UNIFORM HEAT RECOVERY SYSTEM
This straightening iron features Conair’s
Instant Heat technology. It heats up to the
temperature you’ve selected for your hair
type in just 60 seconds and is then ready
to use.
Within this Instant Heat technology there
are 25 variable wet-dry temperature settings for every type of hair, from the finest
to the curliest and most resistant. Use the
low
settings for wet/damp hair and as your hair
dries turn to the medium settings. Once hair
is completely dry, use the medium to high
settings to complete the straightening
process.
Temperature Setting Guide
And that’s not all. Conair’s professional salon
standards of engineering provide you with
a Uniform Heat Recovery System that
maintains the straightening iron at a
constant temperature.
There is a constant surge of power to
ensure that heat is continuously delivered
for optimal styling results, unlike other
units which lose heat during use. This
TEMP. CONTROL HAIR TYPE
Low/Wet 1-8 Delicate, thin, easy-to-straighten hair
Medium/Damp 9-14 Average-to-thick or treated hair
Med-High/Dry 15-20 Thick or wavy hair
High/Dry 21-25 Hard-to-straighten hair
GET TO KNOW YOUR
STRAIGHTENING IRON
25 wet • dry
variable heat
settings
Dual Voltage
Cool Tip
Unique
drying vents
Power “On”
touch pad button
with LED indicator
Automatic Shut Off
6' (1.8 metres)
Professional Line Cord
1 1/2”
cermaic coated
plates
Power “Off”
touch pad button
with LED indicator
Instruction & Styling Guide
For your safety and continued enjoyment
of this product, always read the instruction
book carefully before using.
Model CS26HCSC
1
1
⁄
2
"
Wet•Dry
Ceramic
Straightener
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This straightening iron is intended for
household use. This unit is designed to
operate at 125/250 volts AC. Use on
Alternating Current (50/60 hertz) only.
This appliance has a polarized plug (one
blade is wider than the other.) As a safety
feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
DUAL VOLTAGE
This straightening iron will automatically adjust
to the proper voltage. Use an adapter plug
with correct configuration, prior to use in outlet.
DRYING SYSTEM WITH UNIQUE
DRY,N STRAIGHT
™
WET • DRY DESIGN
This wet
•dry Ceramic Straightener features
our exclusive vent and channel design,
allowing for use on dry or damp hair. When
used on damp hair, excess water is forced
into channels where it can escape as steam.
The steam evaporates through the vents in
the housing, while the hair’s natural moisture
is sealed into the cuticle.
CAUTION: Steam evaporating through the
vents may be hot. During use, avoid touching or blocking the vents and direct drying
vents away from your scalp and face.
STRAIGHTENING BASICS
1. Plug the straightening iron cord into
any household outlet (125/250V). Press
“ON” button (the red light will go on to
indicate that the straightener is plugged
in). The iron will heat up very quickly.
The green indicator light will indicate that
the unit is heating up. To turn off, press
“OFF” button (green light will go off. Red
light will remain on as a safety precaution
to indicate the iron is still plugged in).
Never leave your straightening iron on
and unattended.
WARNING: The straightening iron's plates
will get very hot within a few seconds and
should not be placed in contact with the skin
after the straightening iron has been turned
on.
Start with a hair section that is 2" wide
and no more than 1/2" thick. Open the
iron and place a hair section between the
two hot plates, close to the scalp. Trap
hair between the plates by firmly squeezing the handles together. While maintaining the tension, slowly pull the unit down
along the hair section toward the end of
hair. For best results, use a light styling
lotion before blow-drying hair. At the end
of hair section, release the pressure on
the handle and allow the hair section to
provides consistent styling power so that
every strand of your hair is set with the
same level of heat and comes out the
same way for a perfect Finish.
WARNING:
IF YOU THINK THE
POWER IS OFF WHEN
THE SWITCH IS OFF
YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water
are a dangerous combination. But did you
know that an electric appliance is still
electrically live even if the switch is off? If
the plug is in, the power is on. So when
you are not using your appliances, keep
them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
A Public Service Ad from the Association of Home Appliance
Manufacturers and Underwriters Laboratories, Inc.
USER
MAINTENANCE
Your straightening iron is virtually maintenance-free. No lubrication is needed. Keep all
vents and openings clear of dirt and dust. If
cleaning becomes necessary, disconnect the
unit from the power source, and wipe exterior
with a cloth. If any abnormal condition
occurs, unplug the unit, allow it to cool, and
return it for repair to an authorized service
representative only. No repairs should be
attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the appliance. Damage
will occur at the high flex point of entry into
the appliance, causing it to rupture and short
circuit. Inspect the cord frequently for damage.
Stop use immediately if damage is visible or if
unit stops or operates intermittently.
STORAGE
When not in use, your appliance is easy to
store. Allow appliance to cool, then simply
put back in the box and store out of reach of
children in a safe, dry location. Do not jerk
or strain cord at plug connections.
Loading...