IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING.
KEEP AWAY FROM
WATER
DANGER - Any appliance is elec-
trically live even when the switch is off. To
reduce the risk of death by electric shock:
1. Always unplug appliance immediately
after using.
2. Do not use while bathing.
3. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or
other liquid.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING - To reduce the risk of burns,
electrocution, fire, or injury to persons:
1. This appliance should never be left unattended when plugged in.
2. Do not pull, twist, or wrap line cord
around appliance.
3. This appliance should not be used by, on
or near children or individuals with certain
disabilities.
4. Use this appliance only for its intended
use, as described in this manual. Do not
use attachments not recommended by the
manufacturer.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped or damaged, or dropped into water. Return the
appliance to an authorized service center
for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening.
9. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
10. Unit is hot when in use. Do not let
heated surfaces touch eyes or bare skin.
11. Do not place the heated unit directly on
any surface while it is hot or plugged in.
12. Never block the air openings of the
appliance or place on a soft surface such
as a bed or couch, where the air openings
may be blocked. Keep the air opening free
of lint and other debris.
13. Do not use an extension cord with this
appliance.
14. Do not touch hot surfaces of the appliance. Use handles or knobs.
15. Do not attempt to touch the housing
of your appliance near the straightening
plates, as it is hot when in use.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This deep wave iron is intended for household use. Use on Alternating Current (60
hertz) only. This unit is designed to be operated at 120 volts AC.
This appliance has a polarized plug (one
blade is wider than the other.) As a safety
feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
TO DEEP WAVE HAIR
Hair should be clean and damp or dry
before using the deep wave iron. For best
results, use a light styling product before
blow-drying hair. Plug the iron into an
electrical outlet. Turn on unit. The Power/
Low 285ºF default setting will become
illuminated.
To turn off, press On/Off button. Never leave
your Deep Waver™ on and unattended.
However, should you fail to turn the unit off,
it will shut itself off automatically within
60 minutes.
WARNING: The Deep Waver™ tourmaline
and ceramic-coated plates will get very
hot within a few seconds and should not
be placed in contact with the skin after
the Deep Waver™ has been turned on.
GETTING STARTED USING
YOUR DEEP WAVER™ IRON
The iron’s unique 5 ultra-high heat temperature
settings and instant heat technology provide
styling versatility for all hair types. If you have
fine hair, a low temperature will provide the
best results. If you have thick, wavy or hardto-style hair, keep the heat setting on high. You
can vary the iron’s temperature according to
your particular need!
Temperature Setting Guide
LED TEMP. CONTROL HAIR TYPE
º
Power/Low 285
Medium
Med/High 330
High/Max 360ºF–395
Start with a hair section that is 11⁄2" wide
and no more than 1⁄2" thick. Open the iron
and place a hair section between the two
hot plates, close to the scalp. Trap hair
between the plates by firmly squeezing the
handles together. Once deep wave is set,
release and move deep waver down hair
strand creating a series of deep waves.
At the end of hair section, release the
pressure on the handle and allow the
hair section to slide out. Repeat process
on additional sections of hair until you
achieve the hair style you desire. It may
be necessary to repeat process on certain
areas, depending on the texture of your hair.
Some experience is necessary when learning
to use this Deep Waver™. After using the iron
F
Delicate, thin, easy-to-style hair
Average to thick or treated hair
310ºF
º
F Thick hair
º
F Hard-to-style hair
several times, you will learn the ideal way to
deep wave and style your hair.
STYLING WITH THE NEW EASY-GLIDE
TOURMALINE CERAMIC
The plates of your new
deep wave iron have a
tourmaline-infused easyglide ceramic surface,
the latest in technological
advances. The crushed
tourmaline jewels provide
ionic and infrared benefits, and combined
with ceramic technology produce the
ultimate in healthy, shiny,
silky hair. The Tourmaline
Ceramic™ surface also
helps smooth down
flyaways and frizzies. As
you deep wave your hair,
heat is evenly distributed
so that the style you create has silky, salonperfect deep waves. Hair also glides right
through the plates while styling.
The new Tourmaline
Ceramic™ technology
is a pleasure to work with,
makes styling your hair
easier and provides more
professional results.
You’ll find not only that hair
glides easily over the surface of the plates as
you’re styling, but it's simpler to clean styling
products residue, etc. off after each use.
™
COATED PLATES
USING INSTANT HEAT, THE 5 ULTRA-
HIGH HEAT TEMPERATURE SETTINGS
& UNIFORM HEAT RECOVERY SYSTEM
This styling iron features a powerful
ceramic heater that maintains temperature
during use for precision styling. It heats up
to the temperature you’ve selected for your
hair type.
This Instant Heat technology has 5 ultrahigh heat temperature settings. There is a
temperature range that’s gentle and safe for
every type of hair, from the finest to the most
resistant and helps you create the look you
want. And that’s not all. Conair’s professional
salon standards of engineering provide you
with a uniform and improved heat recovery
system that maintains the iron at constant
temperatures. There is a constant surge of
power to ensure that heat is continuously and
quickly delivered for optimal styling results,
unlike other units that lose heat during use.
This provides consistent styling power so that
every strand of your hair is set with the same
level of heat and comes out the same way for
a perfect finish.
GET TO KNOW YOUR
DEEP WAVER
2 ¼" Deep Waver™ tourmalineceramic-coated plates
Auto off
Instant heat
technology
Powerful
ceramic heater
™
5 ultra-high
heat levels
with LED
temperature
displays
Stainless
steel finish
Professional
swivel line cord
USER
MAINTENANCE
Your Deep Waver™ is virtually maintenancefree. No lubrication is needed. Keep all
vents and openings clear of dirt and dust.
If cleaning becomes necessary, disconnect
the unit from the power source, allow to
cool and wipe exterior with a cloth. If any
abnormal condition occurs, unplug the unit,
allow it to cool, and return it for repair to
an authorized service representative only.
No repairs should be attempted by the
consumer.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never
wrap the cord tightly around the appliance.
Damage will occur at the high flex point
of entry into the appliance, causing it to
rupture and short circuit. Inspect the cord
frequently for damage. Stop use immediately if damage is visible or if unit stops or
operates intermittently.
STORAGE
When not in use, your appliance is easy to
store. Allow appliance to cool, then simply
store out of reach of children in a safe, dry
location. Do not jerk or strain cord at plug
connections. Do not wrap the line cord
around the appliance. Allow the cord to hang
or lie loose and straight at the point of entry
into the appliance.
WARNING:
IF YOU THINK THE
POWER IS OFF WHEN
THE SWITCH IS OFF
YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water
are a dangerous combination. But did you
know that an electric appliance is still
electrically live even if the switch is off?
If the plug is in, the power is on. So when
you are not using your appliances, keep
them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
LIMITED FIVE-YEAR WARRANTY
Conair will repair or replace (at our option)
your unit free of charge for 60 months from
the date of purchase if the appliance is defective in workmanship or materials.
To obtain service under this warranty, return
the defective product to the service center
listed below, together with your purchase
receipt and $5.00 for postage and handling.
California residents need only provide proof
of purchase and should call 1-800-3-CONAIR
for shipping instructions. In the absence of a
purchase receipt, the warranty period shall be
60 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE 60-MONTH DURATION
OF THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF
THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. Some states do
not allow the exclusion or limitation of special,
incidental, or consequential damages, so the
above limitation may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights, which vary
from state to state.
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
For information on any Conair or Infiniti by Conair
product call 1-800-3-CONAIR or visit us on the web
at: www.conair.com/infiniti
©2007 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
Patent Pending
P R O F E S S I O N A L
Tourmaline Ceramic
2¼" Deep Waver
Instruction
& Styling
Guide
For your safety
and continued
enjoyment of this
product, always
read the instruction
book carefully
before using.
™
®
™
™
06NP280
IB-7232
Model S5