Conair S4 User Manual

IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING.
DANGER - Any appliance is electrically
live even when the switch is off. To reduce the risk of death by electric shock:
1. Always unplug appliance immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other liquid.
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING - To reduce the risk of burns,
electrocution, fire, or injury to persons:
1. This appliance should never be left unat­tended when plugged in.
2. Do not pull, twist, or wrap line cord around appliance.
3. This appliance should not be used by, on or near children or individuals with certain disabilities.
4. Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped or dam­aged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any opening.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10. Unit is hot when in use. Do not let eyes or bare skin touch heated surfaces.
11. Do not place the heated unit directly on any surface while it is hot or plugged in.
12. Never block the air openings of the appliance or place on a soft surface such as a bed or couch, where the air openings may be blocked. Keep the air opening free of lint and other debris.
13. Do not use an extension cord with this appliance.
14. Do not touch hot surfaces of the appli­ance. Use handles or knobs.
15. Do not attempt to touch the housing of your appliance near the straightening plates, as it is hot when in use.
SAVE THESE
OPERATING
INSTRUCTIONS
This straightening iron is intended for household use. Use on Alternating Current (60 hertz) only. This unit is designed to be operated at 120 volts AC.
This appliance has a polarized plug (one blade is wider than the other.) As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
TO STRAIGHTEN HAIR
Hair should be clean and damp or dry before using the straightening iron. Plug the iron into an electrical outlet. Turn on unit. The Power/Low 285ºF default setting will become illuminated.
To turn off, press On/Off button. Never leave your straightening iron on and unattended. However, should you fail to turn the unit off, it will shut itself off automatically within 60 minutes.
WARNING: The straightening iron's tourmaline and ceramic-coated plates will get very hot within a few seconds and should not be placed in contact with the skin after the straightening iron has been turned on.
GETTING STARTED USING
WET•DRY TECHNOLOGY
The iron’s unique 5 ultra-high heat temperature settings and Instant Heat technology provide styling versatility for all hair types. If you have fine hair, a low temperature will provide the best results. If you have thick, wavy or hard-to­straighten hair, keep the heat setting on high. You can vary the iron’s temperature according to your particular need!
There are 5 ultra-high heat WetDry temperature settings for every hair type. Use the low settings for wet/damp hair and as your hair dries turn to the medium settings. Once hair is completely dry, use the medium to high settings to complete the styling process.
Temperature Setting Guide
LED TEMP. CONTROL HAIR TYPE
º
Power/Low/Wet 285
Medium/Damp
Med/Dry 330
High/Dry 360ºF - 395
F
Delicate, thin, easy-to-straighten hair
Average to thick or treated hair
310ºF
º
F Thick or wavy hair
º
F Hard-to-straighten hair
Start with a hair section that is 11⁄2" wide and no more than 1⁄2" thick. Open the iron and place a hair section between the two hot plates, close to the scalp. Trap hair between the plates by firmly squeezing the handles together. While maintaining the tension, slowly pull the unit down along the hair section toward the end of hair. For best results, use a light styling product before blow-drying hair. At the end of hair section, release the pressure on the handle and allow the hair section to slide out. Repeat process on additional sections of hair until you achieve the hair style you desire. It may be necessary to repeat process on certain areas, depending on the texture of your hair.
Some experience is necessary when learning to use this straightening iron. After using the iron several times, you will learn the ideal way to straighten and style your hair.
A bonus heat resistant storage pouch has been included to safely store product away when hot. Great for use at home or when traveling.
STYLING WITH THE NEW EASY-GLIDE
TOURMALINE CERAMIC
The plates of your new straightening iron have a tourmaline-infused easy-glide ceramic surface, the latest in technological advances. The crushed tourmaline jewels provide ionic and infrared benefits and combined with ceramic technology produce the ultimate in healthy, shiny, silky hair. The Tourmaline Ceramic surface also helps smooth down flyaways and frizzies. As you smooth your hair, heat is evenly distributed so that the style you create has a salon-perfect, silky smooth finish. Hair also glides right through the plates after it’s straightened.
The new Tourmaline Ceramic Technology is a pleasure to work with, makes styling your hair easier and provides more professional results.
You’ll find not only that hair glides easily over the surface of the plates as you’re straighten­ing, but it's simpler to clean styling products residue, etc. off after each use.
COATED PLATES
USING INSTANT HEAT, THE 5 ULTRA-
HIGH HEAT TEMPERATURE SETTINGS
& UNIFORM HEAT RECOVERY SYSTEM
This styling iron features a ceramic heater that maintains temperature during use for precision styling. It heats up to the temper­ature you’ve selected for your hair type.
This Instant Heat technology has 5 ultra­high heat temperature settings. There is a temperature range that’s gentle and safe for every type of hair, from the finest to the curliest and most resistant and helps you create the look you want. And that’s not all. Conair’s professional salon standards of engineering provide you with a uniform and improved heat recovery system that maintains the iron at constant temperatures. There is a constant surge of power to ensure that heat is continuously and quickly delivered for optimal styling results, unlike other units that lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect finish.
INSTRUCTIONS
GET TO KNOW YOUR
STRAIGHTENING IRON
2" Wet•Dry curved tourmaline-ceramic-coated plates
Auto off
Instant heat technology
Ceramic heater
BONUS
Heat Shield
Storage Pouch
Venting system
Stainless steel finish
Professional 9' swivel line cord
5 ultra-high heat levels with LED temperature displays
USER
MAINTENANCE
Your straightening iron is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representa­tive only. No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immedi­ately if damage is visible or if unit stops or operates intermittently.
STORAGE
When not in use, your appliance is easy to store. Allow appliance to cool, then simply store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections. Do not wrap the line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance.
WARNING:
IF YOU THINK THE
POWER IS OFF WHEN
THE SWITCH IS OFF
YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
LIMITED FIVE-YEAR WARRANTY
Conair will repair or replace (at our option) your unit free of charge for 60 months from the date of purchase if the appliance is defec­tive in workmanship or materials.
To obtain service under this warranty, return the defective product to the service center listed below, together with your purchase receipt and $5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 60 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 60-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do
not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Service Center
Conair Corporation Service Department 7475 N. Glen Harbor Blvd. Glendale, AZ 85307
For information on any Conair or Infiniti by Conair product call 1-800-3-CONAIR or visit us on the web at: www.conair.com/infiniti
©2006 Conair Corporation 150 Milford Road, East Windsor, NJ 08520 7475 N. Glen Harbor Blvd., Glendale, AZ 85307
Patent Pending
06NP122
IB-6832
P R O F E S S I O N A L
Tourmaline Ceramic
2" Wet•Dry
Curved Plate Straightener
Instruction & Styling Guide
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
®
Model S4
Loading...