Conair Palm-Pro User Manual
Job Number
Model #:
:
Box Size:
Material:
Coating:
Color (Front):
(Back):
Date: Aug. 14 2009 Artist
:
Mariecon N.
UV
4 C- (CMYK)
0 C
Die-Cut
PGR44C Clamshell
09PGC00001
106mm (w) x 425mm (h)
350GSM Whiteback Cardboard
Job Number
Model #:
:
Box Size:
Material:
Coating:
Color (Front):
(Back):
Date: Aug. 14 2009 Artist
:
Mariecon N.
UV
1 C- (black)
0 C
Die-Cut
Black
PGR44C Clamshell
09PGC00001
106mm (w) x 425mm (h)
350GSM Whiteback Cardboard
Die-Cut
Black
Palm-Pro
Directions for use:
1)
Prior to turning trimmer on, please be sure that battery
has been properly installed.
a) Slide battery compartment cover off
b)
Insert one AA alkaline battery into trimmer
c) Replace battery cover
2)
Turn trimmer on by pushing slide switch on bottom of unit forward to ON
position. Please be sure to turn
trimmer off immediately after use to preserve battery life.
3)
There are two trimmer comb attachments for either a medium or a long
cut. Simply place one side of attachment over the front of the blades and
snap the other side in place. To remove, pull tab away from one side.
Micro Pet Trimmer
Please be sure that the attachments are firmly in place before turning the
trimmer on.
To replace comb and blade assembly
1) Remove two screws, making sure that you maintain pressure
against the large fixed blade.
2) Remove comb and blade assembly as a set and
discard, making sure that you do not remove the plastic and
spring drive assembly.
To assemble new comb and blade set
1) Remove from package – Keep as a set; do not
disassemble
2) Attach set to plastic drive by inserting raised portion of plastic
drive assembly into the large slot of the cutter, making sure you
do not disengage the drive from the spring. Apply pressure to
hold in place.
3) With pressure applied on the large comb, reassemble two
screws.
Oiling blades
For best results, put a drop of lubricating oil on the blade approximately
once a month. Motor bearings are permanently lubricated – do not
attempt to oil.
Notice – do not over-oil:
This trimmer requires very little oiling. When it is necessary to oil, turn
trimmer on, hold the unit with blades facing DOWN, and squeeze one drop
of oil onto blades. Wipe off excess with soft cloth.
LIMITED ONE YEAR WARRANTY
Job Number
Model #:
:
Box Size:
Material:
Coating:
Color (Front):
(Back):
Date: Aug. 14 2009 Artist
:
Mariecon N.
1 C- (black)
0 C
Die-Cut
Black
PGR44C Clamshell Insert
09PGC00001
99mm (w) x 152mm (h)
Conair will repair or replace (at our option) your unit free
of charge for 12 months from the date of purchase if the
appliance is defective in workmanship or materials.
To obtain service under this warranty, return the defective product to the service centre listed below that
is nearest you, together with your purchase receipt
and $5.50 for postage and handling. In the absence
of a purchase receipt, the warranty period shall be
12 months from the date of manufacture.
ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE
12 MONTH DURATION OF THIS WRITTEN WARRANTY.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER.
This warranty gives you specific legal rights, and you
may also have other rights, which vary from province to
province.
SERVICE CENTRE :
Conair Consumer Products Inc.
100 Conair Parkway, Woodbridge, ON L4H 0L2
For information on any Conair product call: 1-800-472-7606
or visit us on the web at www.conaircanada.ca
Consumer Call Centre E-mail:
©2009 Conair Consumer Products Inc.
Made in China
09PGC00001
Consumer_Canada@Conair.com
Loading...