Conair LT3CSC Operating Instructions Manual

OPERATING
INSTRUCTIONS
BEFORE USE:
Prior to initial use, test trimmer on small area of arm or leg. If any signs of allergic reaction or sensitivity occur, discontinue use. Do not use trimmer on ultra sensitive or irritated skin. Keep out of reach of children.
TO OPERATE TRIMMER
This trimmer comes with a two trimming blades. The larger blade can be used to trim body hair and eyebrows. The smaller blade is ideal for detailing.
It also comes with an attachment comb that helps you achieve an even cut when you do not want to completely remove the hair. The attach­ment comb has two sides, the longer tooth is good for body hair while the shorter one is good for eyebrow trimming. Aligning the indicator with the L mark on the comb leaves hair longer while aligning with S mark leaves hair shorter.
To use the attachment comb, be sure the unit is in the “off” posi­tion and slide it over the trimming blades. Make sure that the teeth of the comb are facing in the same direction as the trimming blade and that the top of the comb is even with the top of the trimmer. (See Fig. 1)
If you want to completely remove hair, use the trimmer without the attachment comb.
To operate the trimmer, slide the “on” switch towards the trimming blades. When you are fin­ished trimming, slide the “on” switch away from the blades.
Fig. 1
®
Instruction Guide
For your safety & continued
enjoyment of this product,
always read the instruction book
carefully before using.
Model LT3CSC
Long Tooth
Short
Tooth
DIRECTIVES
D’UTILISATION
AVANT L’UTILISATION :
Pour ranger la tondeuse, placez le
protecteur du peigne sur les lames,
alignant le triangle du peigne avec
l’indicateur sur le manche de la ton-
deuse (ill. 2). Glissez alors le capu-
chon sur le peigne de façon à ce que
To store the Trimmer, slide the attachment comb cover the trimming blades. Be sure to align triangle sign on the comb attachment with indicator on the trimmer housing.(see Fig. 2) Then slide the protective cap over the attachment comb so that the triangle sign on protective cap aligns with the triangle sign on the handle tube (see Fig. 3)
TRIMMING TIPS
1. Place the trimmer at a slight right angle to the skin, and trim in the direction of hair growth.
2. Continue trimming in the direction of growth. Be careful not to apply excess pressure to the blade. This may damage the blade, and can result in injury to the skin during trimming.
3. Pull the skin firmly with one hand during the trimming process to ensure the closest possible shave.
REPLACING THE BATTERY:
To replace battery first remove lower housing and remove/replace battery and re-assemble to cover housing. Dispose of battery properly after use. Do not incinerate.
1. Be sure appliance is off and remove the protective cap. Hold the upper part of the trimmer firmly and pull off battery cover. (Handle tube)
2. Insert 1 “AAA” battery. Pay close attention,
Fig. 1
Fig.2
Fig.3
Long Tooth
Short
Tooth
Protective Cap Handle Tube
Loading...