• If you are pregnant, please consult your physician before using.
USER MAINTENANCE INSTRUCTIONS
1) Make sure foot spa is in OFF position.
2) Place foot spa on floor, fill with warm or cold water, and plug into wall outlet. Never plug or
unplug the foot spa while your feet are in water.
3) The heat setting is designed to maintain the temperature of warm water, not to heat water.
4) Sit in a chair and place your feet in the water. Never stand in foot spa.
5) To start the bubble setting function, push the ‘bubbles on/off’ button first.
To start the vibration and water jet function, you can push any combination at the same time.
- left button: vibration/heat
- center top button: bubbles on/off
- right button: water jets
- center button: bubbles high/low plus heat
6) Choose one of the 5 attachments for massaging treatment, and place on central post.
7) Slide feet over removable rollers for a deep kneading massage. Rollers are removable –
simply pick rollers out of grooves to remove.
8) To clean, make sure foot spa is in Off position and disconnected from outlet, and then rinse
with water. (Never submerge unit in water.) Wipe with a damp cloth. Do not use any strong
chemical cleaners or solvents such as benzine, harsh detergents or abrasives.
9) Foot spa can also be used as a dry foot massager without water (for vibration only).
10) Fill foot spa with warm or cold water to the level indicator MAX. Do not fill above water level
indicator. Never overfill.
11) Pour water out of the foot spa from the line cord side only.
12) Gently wrap power cord around cord storage feet.
13) Do not hang unit from power cord.
14) Store unit in its box or in a clean, dry place.