Conair CS710 User Manual

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially
when children are present, basic safety pre­cautions should always be followed, including
the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER

live even when the switch is off. To reduce
the risk of death by electric shock:

1. Always unplug appliance immediately

after using.

2. Do not use while bathing or in the shower.

3. Do not place or store appliance where it
can fall or be pulled into a tub or sink.

4. Do not place in, or drop into, water or other
liquids.

5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.

WARNING

burns, electrocution, fire, or injury to persons:

1. This appliance should never be left

unattended when plugged in.

2. This appliance should not be used by, on or
near children or individuals with certain
disabilities.

3. Use this appliance only for its intended use, as
described in this manual. Do not use attach-

- Any appliance is electrically

- To reduce the risk of

ments not recommended by the manufacturer.

4. Never operate this appliance if it has a

damaged cord or plug, if it is not working
properly or if it has been dropped or
damaged, or dropped into water. Return
the appliance to an authorized service
center for examination and repair.

5. Keep the cord away from heated
surfaces. Do not pull, twist, or wrap line
cord around appliance.

6. Never use while sleeping.

7. Never drop or insert any object into any
opening or hose.

8. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.

9. Unit is hot when in use. Do not let heated
surface touch eyes or skin.

10. Do not place the heated unit directly on any
surface while it is hot or plugged in.

11. Never block the air openings of the
appliance or place on a soft surface such as a
bed or couch, where the air openings may be
blocked. Keep the air openings free of lint and
other debris.

12. Do not use an extension cord with this
appliance.

13. Do not touch hot surfaces of the appli­ance. Use handles or knobs.

14. Do not attempt to touch the housing of
your appliance near the barrel, as it is hot
when in use.

15. Do not operate with a voltage converter.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This flat iron is intended for household use. Use
on Alternating Current (60 hertz) only. This unit is
designed to be operated at 120 volts AC.

This appliance has a polarized plug (one blade
is wider than the other). As a safety feature,
this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to defeat
this safety feature.

TO STRAIGHTEN HAIR

Hair should be clean and completely dried
before using the flat iron. Plug the iron into
an electrical outlet. Turn on unit. Select
desired temperature setting; the indicator
light will blink for each temperature set­ting until selected temperature is reached.
Indicator light will then become steady.

To turn off, press Off button (lights will go off).
Never leave your flat iron on and unattended.
However, should you fail to turn the unit off it will
shut itself off automatically within 60 minutes.

WARNING: The flat iron's tourmaline
ceramic-coated
get very hot within a few seconds and
should not come into contact with the
skin after the flat iron has been turned on.

™

oil-infused plates will

INSTANT HEAT TECHNOLOGY

The iron’s unique high temperature settings
and Instant Heat technology provide styling
versatility for all hair types. If you have fine
hair, a low temperature will provide the best
results. If you have thick, wavy or hard-to­straighten hair, keep the heat setting on high.
You can vary the iron’s temperature according
to your particular need by selecting the desired
temperature setting.

For best results, use a light styling product
before blow-drying hair. Start with a hair
section that is 1 ½ inches wide and no
more than ½ inch thick. Open the iron and
place the hair section between the two hot
plates, close to the scalp. Trap hair between
the plates by firmly squeezing the handles
together. While maintaining the tension,
slowly pull the unit down along the hair
section toward the end of hair section. At the
end, release the pressure on the handle and
allow the hair to slide out. Repeat process on
additional sections of hair until you achieve
the hair style you desire. It may be necessary
to repeat process on certain areas, depending
on the texture of your hair.

As you straighten your hair, you’ll find that
it glides more easily over the micro-bonded
plate surfaces, and any residue from styling
products is easy to remove.

Some experience is necessary when learn­ing to use this flat iron. After using the iron
several times, you will learn the ideal way to
straighten and style your hair.

STYLING WITH THE TOURMALINE

™

CERAMIC

Your new flat iron plates feature tourmaline
ceramic
glide, maximum manageability and more pro­fessional results.

The Tourmaline Ceramic
ogy combines all that is best for your hair.
The unique properties leave hair shinier and
healthier looking. Tourmaline emits infrared
heat for gentle styling, and natural ions that
reduce frizz, help smooth down flyaways and
renew the vitality of your hair. And ceramic
generates gentle infrared energy and evenly
distributes heat to protect hair from damage.
Argan oil protects, revitalizes and nourishes
hair. Tourmaline Ceramic promotes healthy,
shiny hair while fighting frizz.

The oil-infused, shine-enhancing surface is
extra smooth for faster styling results.

Whatever style you create, this trio of
technologies leaves your hair with a
salon-perfect, silky smooth finish.

A bonus .25 fl oz. bottle of One ’N Only Argan
oil is included. Derived from Moroccan Argan
trees this non-greasy alcohol-free formula is
instantly absorbed in the hair creating brilliant
shine and conditioned silky hair.

One ‘N Only Argan oil can be purchased online
at www.stylesource.com

-COATED OIL-INFUSED PLATES

™

oil-infused plates for smoother

™

oil-infused technol-

STYLING WITH THE NEW EASY-GLIDE

FLOATING TOURMALINE CERAMIC

COATED OIL-INFUSED PLATES

The plates of your new straightening iron are
designed with a little give, to “float” in your
iron. This provides better contact with hair,
eliminating gaps, for straighter results. The
easy-glide ceramic surface is the one of the
latest – and best – technological advances in
hair appliances. The ceramic even heat distri­bution produces the ultimate in healthy, shiny,
silky-looking hair. You’ll find that hair glides
easily over the surface of the plates as you’re
straightening, and that it is easier to clean
styling product residue, etc., off the plates
after each use. The ceramic surface also
helps smooth down flyways and frizzies.
As you smooth your hair, heat is evenly
distributed so that the style you create has
a salon-perfect, silky smooth, shiny finish.
Hair also glides right through the plates after
it’s straightened.

USING INSTANT HEAT, THE 30 ULTRA-

HIGH HEAT TEMPERATURE SETTINGS

& UNIFORM HEAT RECOVERY SYSTEM

This styling iron features a powerful ceramic
heater that maintains high temperatures
during use for precision styling. It heats up
quickly to the temperature you’ve selected
for your hair type.

This Instant Heat technology has 30 ultra-high

™

temperature settings. There is a temperature
range that’s gentle and safe for every type of
hair, from the finest to the curliest and most
resistant, and helps you create the look you
want. And that’s not all. Conair’s professional
salon standards of engineering provide you with
a uniform and improved heat recovery system
that maintains the iron at constant temperatures.
There is a constant surge of power to ensure
that heat is continuously and quickly delivered
for optimal styling results, unlike other units,
which lose heat during use. This provides con­sistent styling power so that every strand of
your hair is set with the same level of heat and
comes out the same way for a perfect finish.

Styling has never been easier with the new
Tourmaline Ceramic
iron! Get ready to experience salon results
without the salon!

™

-coated oil-infused flat

Temperature Setting Guide

TEMP. CONTROL HAIR TYPE

Low 1–8 Delicate, thin, easy-to-straighten hair

Medium 9–14 Average to thick or treated hair

Med-High 15–20 Thick or wavy hair

High 21–25 Hard-to-straighten hair

Maximum 26–30 Very resistant hair

GET TO KNOW YOUR FLAT IRON

Powerful ceramic heater

29% longer plates

Floating
plate

1 in. (25.4 mm)
tourmaline ceramic
oil-infused
straightening plates

30 ultra-high
heat settings
455°F/235°C

Indicator light

Power On/Off
button

Extra-long swivel
line cord

*When compared to other Conair® straighteners
Actual plate size may vary

for faster styling*

Natural ionic
technology

15-second

heat-up

Auto Off

USER

MAINTENANCE

Your flat iron is virtually maintenance-free. No
lubrication is needed. Keep all vents and open­ings clear of dirt and dust. If cleaning becomes
necessary, disconnect the unit from the power
source, allow to cool and wipe exterior with a
cloth. If any abnormal condition occurs, unplug
the unit, allow it to cool, and return it for repair
to an authorized service representative only. No
repairs should be attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the appliance. Damage
will occur at the high flex point of entry into
the appliance, causing it to rupture and short
circuit. Inspect the cord frequently for damage.
Stop use immediately if damage is visible or if
unit stops or operates intermittently.

STORAGE

When not in use, your iron is easy to store.
Allow appliance to cool, then simply store out
of reach of children in a safe, dry location. Do
not jerk or strain cord at plug connections.
Do not wrap the line cord around the appli­ance. Allow the cord to hang or lie loose and
straight at the point of entry into the appliance.

WARNING:

IF YOU THINK THE

POWER IS OFF WHEN

THE SWITCH IS OFF

YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are
a dangerous combination. But did you know
that an electric appliance is still electrically
live even if the switch is off? If the plug is in,
the power is on. So when you are not using
your appliances, keep them unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

LIMITED THREE-YEAR WARRANTY

Conair will repair or replace (at our option)
your unit free of charge for 36 months from
the date of purchase if the appliance is
defective in workmanship or materials.

To obtain service under this warranty,
return the defective product to the service
center listed, together with your purchase
receipt and $5.00 for postage and handling.
California residents need only provide proof
of purchase and should call 1-800-3-CONAIR
for shipping instructions. In the absence of a
purchase receipt, the warranty period shall
be 36 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
IN DURATION TO THE 36-MONTH DURATION
OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how
long an implied warranty lasts, so the above
limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH
OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER. Some

states do not allow the exclusion or limitation
of special, incidental, or consequential dam­ages, so the above limitation may not apply
to you.

This warranty gives you specific legal rights,
and you may also have other rights, which
vary from state to state.

Service Center

Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307

Please register this product at:
www.conair.com/registration

For information on any Conair
product call 1-800-3-CONAIR or visit us on the web
at: www.conair.com/infiniti

©2011 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307

10NP115350

®

or Infiniti by Conair®

IB-10445A

1 in.

(25.4mm)

Oil-Infused ceramic

flat iron

ArgAn OIL
FUSIOn

cOndItIOnIng
AntI-FrIZZ

Model CS710

Instruction
& Styling
Guide

For your safety and
continued enjoyment
of this product, always
read the instruction book
carefully before using.

Shiny, Smooth
Results!

+