Conair BHC1CSC Instruction Booklet

Scissors

Hair Comb

Toddler
Clipper

Storage Pouch

BHC1CSC

TODDLER CLIPPER

Barber Cape

ON/OFF Switch

Picture Pals Book

Attachment Combs

LIMITED FIVE YEAR WARRANTY

Conair will repair or replace (at our option) your
unit free of charge for 60 months from the date of
purchase if the appliance is defective in workman­ship or materials.

To obtain service under this warranty, return the
defective product to the service centre listed below
together with your purchase receipt and $5.50 for
postage and handling. In the absence of a purchase
receipt, the warranty period shall be 60 months from
the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR
LIABILITIES, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED IN DURATION TO THE 60
MONTH DURATION OF THIS WRITTEN, LIMITED
WARRANTY.

IN NO EVENT SHALL CONAIR BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER.

This warranty gives you specific legal rights, and you
may also have other rights, which vary from province
to province.

SERVICE CENTRE:

Conair Consumer Products Inc.

156 Parkshore Drive,
Brampton, Ontario, L6T 5M1.
1-800-472-7606
©2006 Conair Consumer Products Inc.
www.conaircanada.ca

Consumer Call Centre E-mail :

[e-mail]

06CN1091 IB-6842

BHC1CSC

TONDEUSE POUR ENFANTS

ENTRETIEN DES LAMES

AJUSTEMENT / REMPLACEMENT DES LAMES

La tondeuse est munie d’un jeu de lames amovible

IMPORTANT SAFETY

INSTRUCTIONS

Not a toy, not for use by children. Exercise cau­tion when using this product on children. Keep
clipper, attachments, scissors out of reach of
children at all times.

When using electrical appliances, especially when
children are present, basic safety precautions
should always be taken, including the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY

FROM WATER

DANGER– Any appliance is electri-

cally live, even when the switch is off.
To reduce the risk of death or injury by
electric shock:

1. Always unplug appliance from electrical
outlet immediately after using (except when
charging unit).

2. Do not place or store appliance where it
could fall or be pulled into a tub or sink.

3. Do not use appliance while bathing or in the
shower.

4. Do not place appliance in, or drop into, water
or other liquid.

5. If appliance has fallen into water, do not
reach for it. Unplug immediately.

DO NOT REACH

INTO THE WATER

WARNING– To reduce the risk

of burns, electric shock, fire, or injury to
persons:

1. Never leave a plugged-in appliance
unattended.

2. This appliance should not be used by, on,
or near children with certain disabilities.

3. Use appliance only for its intended use as
described in this manual. Only use attach­ments recommended by the manufacturer.
Do not use an extension cord to operate
the appliance.

4. Never operate the appliance if it has a
damaged cord or plug, is not working
properly, has been dropped or damaged, or
dropped into water. Return the appliance
to a Conair service centre for examination
and repair.

5. Keep the appliance cord away from
heated surfaces.

6. Do not pull, twist or wrap the cord around
the appliance.

7. Never drop or insert any object into any
opening of the appliance.

8. Do not place the appliance on any surface
while it is operating.

9. Do not use the appliance with a damaged
or broken comb or with teeth missing from
the blades, as injury may result. Before
each use, make certain the blades are
aligned properly and oiled.

10. Do not use the appliance outdoors or where
aerosol (spray) products are being used or
oxygen is being administered.

Po u r co u pe r l es

cheveux plus courts :

A ) P r e s s e r l e

Le délignage se fait sans peigne. Peigner les

cheveux puis placer la tondeuse entre le favori et

l’oreille (voir ci-dessous). Tenir le coin de la lame

contre la ligne des cheveux. Utilisant la ligne

THE CONAIR GUIDE

TO CUTTING HAIR AT HOME

Before you start:

1. Inspect your clipper. Make sure it’s free of
hair and dirt, properly oiled, and r

unning

smoothly.

2. Place the barber cape around the neck of
the child getting a haircut.

3. Seat the child so that his or her head is
at your eye level. This gives you greater
visibility and control.

4.

First, comb hair until it’s tangle-free. Then hold
clipper in a comfortable grip. Now you’re ready
to cut.

MEDIUM TO LONG CUT

To begin with, cut only a small amount of hair
until you become used to the length each attach­ment leaves the hair. Try the longest attachment
on the clipper first. If you want a shorter cut, you
can then use shorter combs.

• Short attachment comb (number 1).

• Medium-Short attachment comb (number 2).

• Medium-Long attachment comb (number 3).

• Long attachment comb (number 4).

• Three position tapper control.

Attach combs by
holding the teeth up,
then snapping onto
the bottom of the clip­per blade.

To re mo v e co m b
attachments, place
inde x fi n ge r an d
thumb as illustrated;
then pull out and up.

NOTE: Never push
or shove the clip-

per through the hair
to make it move more quickly. Professional
experience shows that the clipper works
most efficiently when it cuts through the
hair at its own speed.

To begin cutting hair:

1. The hair should be combed in its natural
direction.

2. Using the largest

attachment comb,

trim sides from the

bottom upwards. Hold
clipper lightly against
the hair with teeth of
the attachment comb
pointing upward, yet
flat against the head.
Gradually lift the clip-

per upward and out­ward through the hair,
trimming just a little
at a time.

Repeat around sides
and back of head.

If you want hair to be

CONSERVER CES

DIRECTIVES

GUIDE CONAIR POUR LA COUPE

DES CHEVEUX À LA MAISON

Avant tout :

For a flat top, use the flat comb, not the attach­ment comb. Just cut hair on top of the head over
the flat comb. (see above).

To taper hair down to the neckline, use attach­ment comb #1. Comb hair and check for
uneven spots. Outline sideburns and neck areas
(see “Outlining”).

3 POSITION TAPER CONTROL

The Conair clipper taper control switch is posi­tioned at the back of the unit. You can hold the
clipper in your hand and adjust the switch as
needed. The taper control eliminates the need
in some situations for an attachment comb,
because it lets you gradually adjust the close­ness of the cut. For closest cut and shortest hair,
push switch all the way to level #1. To increase
the cutting length, slowly push control down to
level #2 or #3 for longer cut.

Note that too much clipped hair on the clip­per can slow down its operation. To remove it
without removing the blades simply use the
enclosed cleaning brush and gently sweep away
the clipped hair from cutting surfaces.

USER MAINTENANCE

INSTRUCTIONS

TAKING CARE OF YOUR CLIPPER

ON/OFF SWITCH

To operate, simply push slide toward blade; to
stop, push slide away from blade.

On/Off Switch

MD

®

Model BHC1CSC

Instruction Booklet

Kid Klip

Conair wants to thank you for choosing

our clipper. We know it will provide you

with years of reliable service.

For your safety and continued enjoyment

of this product, always read the instruction

booklet carefully before using.

COMMANDE D’ANGLE À 3

POSITIONS

La commande d’angle de la tondeuse Conair se

DIRECTIVES POUR

L’ENTRETIEN PAR

™

SAVE THESE

THE CONAIR GUIDE

TO CUTTING HAIR AT HOME

INSTRUCTIONS

OPERATING INSTRUCTIONS:

If your clipper does not seem to be operating
correctly, take the following troubleshooting
steps before returning it for repair:

1. Be sure the electrical outlet is working by
plugging in another appliance to test the
outlet.

2. Make sure the electrical plug is not
connected to a switch which turns power
off when lights are turned off.

3. Make sure power cord is securely plugged
into clipper.

Before you start:

1. Inspect your clipper. Make sure it’s free of
hair and dirt, properly oiled, and r
smoothly.

2. Place the barber cape around the neck of
the child getting a haircut.

3. Seat the child so that his or her head is
at your eye level. This gives you greater
visibility and control.

4.

First, comb hair until it’s tangle-free. Then hold
clipper in a comfortable grip. Now you’re ready
to cut.

MEDIUM TO LONG CUT

To begin with, cut only a small amount of hair
until you become used to the length each attach-

FOR HOUSEHOLD USE ONLY

1. Plug adaptor into any wall outlet (at the
voltage listed on the label affixed to the
adaptor).

2. Make sure power cord is securely attached
to the unit.

ment leaves the hair. Try the longest attachment
on the clipper first. If you want a shorter cut, you
can then use shorter combs.

• Short attachment comb (number 1).

• Medium-Short attachment comb (number 2).

• Medium-Long attachment comb (number 3).

• Long attachment comb (number 4).

• Three position tapper control.

even shorter:
A) Apply more pres-

sure to the head with
the attachment comb
that is in place. This
takes a little prac­tice, of course.

OR

B) Just switch to a
shorter attachment
comb.

Remember, it’s bet­ter to l e a ve t oo
much hair than too

little. For longer hair
on top, use a barber
comb and lift hair
on the top of the
head, cutting over

the comb. Or hold the hair between the fingers
and cut to desired length. Always working from
the front to the back of the head; gradually cut
the hair shorter by reducing the space between
the comb or fingers and the head. Comb often
to check for uneven strands, and to get rid of
trimmed hair.

OUTLINING:

Outlining requires no attachments. Comb
hair into the desired style. Position the clipper
between the sideburns and the ear (see below),
making sure the corner edge of the blade is
against the hairline. With the outline of the hair
as your guide, slowly move the clipper over,
around and behind the ears. For the back of
the neck and the sideburns, hold the clipper
upside down (see above) and, holding it against
the skin at the length desired, move the clipper
downward.

STOP. COMB. CHECK.

For best results, do as the professionals do:
comb hair often, and check clipping results as
you comb. This way you avoid uneven sides,
bangs, neckline, etc.

SHORT CUTS TO PERFECT

FLAT TOPS, CREW CUTS, ETC.

Always cut from the back of the neck to the
crown, using the longest comb setting.

Hold the comb attachment flat against the
head and slowly move the clipper up through
the hair. Use the same technique for the sides,
cutting from the bottom to the upper side
of the head.

For the front to the crown, cut the hair against
the direction in which it grows. Then even it up
with the sides.

CONSIGNES

IMPORTANTES

ATTENTION– Pour réduire le

risque de brûlures, choc, incendie ou blessure :

1. Ne jamais laisser un appareil branché sans

BLADE CARE
BLADE ADJUSTMENT/REPLACEMENT:

The clipper is equipped with a detachable blade
set for blade cleaning and adjustment purposes.

To remove the blade:
The front of the clipper
should be facing you,
push under the blade
with your thumb and
the blade will pop-out.

To replace the blade:
make sure the taper
control is set to the
longest position and
with the back of the
clipper facing you,
insert the bottom side

TODDLER CLIPPER

with screws of the
blade in the clipper and push down until it snaps
into place.

Because the clipper blades are precision-made
for a very special use, they should always be
handled with care. Each time you finish using
the clipper, take the cleaning brush provided and
brush away any loose hair that has collected in
the blades.

Be especially careful when changing or adjusting
blades. When you have your clipper serviced, be
sure that both blades are sharpened or replaced
at the same time.

Scissors

Attachment Combs