Page 1
DÉLIGNAGE :
Le délignage se fait sans peigne. Peigner
les cheveux puis placer la tondeuse entre le
favori et l’oreille (ill. 1). Tenir le coin de la
contre la tête. Soulever la tondeuse graduel-
lement vers le haut et l’extérieur, ne coupant
qu’un peu de cheveux à la fois.
Procéder ainsi pour les côtés et l’arrière de la
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER– Any appliance is electrically
live, even when the switch is off. To reduce the
risk of death or injury by electric shock:
1. Unplug this appliance before cleaning.
2. Do not place or store appliance where it can fall
or be pulled into a tub or sink.
3. Do not use while bathing or in a shower.
4. Do not place in, or drop into, water or other
liquid.
5. Do not reach for an appliance that has fallen
into water. Unplug immediately.
6. Always unplug this appliance from electrical
outlet immediately after using.
DO NOT REACH
INTO THE WATER
WARNING– To reduce the risk
of burns, electrocution, fire, or injury to
persons:
1. This appliance should never be left
unattended when plugged in. Do not pull,
twist, or wrap line cord around appliance.
20
PIECE
Instructions for Care and Use
MODEL HC220GBC
Have a Question?
Please do not return this product
to the retailer.
Call Us First!
Our customer service and product experts
are ready to answer ALL your questions.
Please call our TOLL-FREE
customer service number at:
1-800-472-7606
or visit us online at
www.conaircanada.ca
Page 2
Page 3
• Le peigne long (numéro 7) coupe les
cheveux à 2,25 cm
• Le peigne pour l’oreille gauche est
GUIDE CONAIR DE COUPE
DES CHEVEUX À LA MAISON
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This appliance is intended for household use. Use on Alternating Current
120 V AC, 60 hertz only.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature,
this plug will fit in the outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not change the plug in any way. Do
not attempt to defeat this safety feature.
Your new Conair® haircut kit has everything
you need to achieve professional haircuts
at home. It features a powerful clipper, with
adjustable taper control and steel blades
for cutting precision. Also included are
9 attachment combs for different hair lengths.
It also comes with a barber comb, barber scissors, cleaning brush, barber cape, a carry case
for easy storage and travel, 2 styling clips,
styling comb, lubricating oil and a blade guard
for easy maintenance of the clipper blades.
2. This appliance should not be used by, on, or
near children or individuals with certain disabilities.
3. Use this appliance only for its intended
purpose as described in this manual. Do not
use attachments not recommended by the
manufacturer. Do not use an extension cord
to operate this appliance.
4. Never operate this appliance if it has a
damaged cord or plug, or if it is not working
properly, if it has been dropped or damaged,
or dropped into water. Return the appliance to
a service centre for examination and
repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any open
-
ing on this appliance.
7. Do not place appliance on any surface while it
is operating.
8. Do not use this appliance with a damaged or
broken comb or with teeth missing from the
blades as injury may occur. Before use, make
certain blades are aligned properly. (See
“Care of your Clippers”)
9. Do not use outdoors or operate where aero
sol (spray) products are being used or where
oxygen is being administered.
10. Never operate the appliance with the
air openings blocks or while on a soft
surface, such as a bed or couch, where the air
openings may be blocked. Keep the air
openings free of lint, hair, and the like.
11. Always attach plug to appliance first, then
to outlet. To disconnect, turn all controls to
“OFF” then remove plug from outlet.
Page 4
Page 5
11. Brancher le cordon à l’appareil puis à
la prise. Pour le débrancher, éteindre
l’appareil puis sortir la fiche de la prise.
1.
Ne jamais laisser un appareil branché sans
surveillance. Ne tirez, tordez ni enroulez le fil
autour de l’appareil
.
• Long attachment comb (number 6) cuts
hair to 3/4”.
• Long attachment comb (number 7) cuts
hair to 7/8”.
• Left ear attachment comb lightly tapers
over left ear.
• Right ear attachment comb lightly tapers
over right ear.
Attach combs by
holding the teeth
up, then snapping
onto the bottom of
the clipper blade.
To remove comb
attachments, place
index finger and
thumb as illustrated; then pull out
and up.
NOTE: Never push or shove the clipper through
the hair to make it move more quickly. Professional experience shows that the clipper
works most efficiently when it cuts through
the hair at its own speed.
To begin cutting hair:
1. The hair should be
combed in its natural
direction.
2. Using the largest
attachment comb, trim
sides from the bottom upwards. Hold clipper lightly
against the hair with teeth
THE CONAIR GUIDE TO CUTTING
HAIR AT HOME
Before you start:
1. Inspect your clipper. Make sure it’s
free of hair and dirt, properly oiled, and
running smoothly.
2. Place a towel or cape around the neck
of the person.
3. Seat the person so that his or her head is at
your eye level. This gives you greater
visibility and control.
4. First, comb hair until it’s tangle-free. Then
hold clipper in a comfortable grip. Now you’re
ready to cut.
MEDIUM TO LONG CUT
To begin with, cut only a small amount of hair
until you become used to the length each
attachment leaves the hair. Try the longest
attachment on the clipper first. If you want a
shorter cut, you can then use shorter combs.
• Short attachment comb (number 1) cuts
hair to
1
/8”.
• Medium-Short attachment comb
(number 2) cuts hair to ¼”.
• Medium-Long attachment comb
(number 3) cuts hair to 3/8”.
• Long attachment comb (number 4) cuts
hair to ½”.
• Long attachment comb (number 5) cuts
hair to
5
/8”.
Page 6
Page 7
CONSIGNES
IMPORTANTES
L’utilisation d’appareils ménagers, surtout aut-
OUTLINING:
Outlining requires no attachments. Comb hair
into the desired style. Position the clipper
between the sideburns and the ear (Fig. 1),
making sure the corner edge of the blade is
against the hairline. With the outline of the hair
as your guide, slowly move the clipper over,
around and behind the ears. For the back of
the neck and the sideburns, hold the clipper
upside down (Fig. 1) and, holding it against the
skin at the length desired, move the clipper
downward.
STOP. COMB. CHECK.
For best results, do as the professionals do:
comb hair often, and check clipping results as
you comb. This way you avoid uneven sides,
bangs, neckline, etc.
SHORT CUTS TO PERFECT FLAT
TOPS, CREW CUTS, ETC.
Always cut from the back of the neck to the
crown, using the longest comb setting. Hold
the comb attachment flat against the head and
slowly move the clipper up through the hair.
Use the same technique for the sides, cutting
from the bottom to the upper side of the head.
of the attachment comb pointing upward, yet
flat against the head. Gradually lift the clipper
upward and outward through the hair, trimming just a little at a time.
Repeat around sides and back of head.
If you want hair to be even shorter:
A) Apply more pressure
to the head with the
attachment comb that is
in place. This takes a little
practice, of course.
OR
B) Just switch to a shorter
attachment comb.Remember, it’s better to leave too
much hair than too little.
For longer hair on top, use
the barber comb and lift
hair on the top of the head,
cutting over the comb. Or
hold the hair between the
fingers and cut to desired
length. Always working
from the front to the back
of the head, gradually cut
the hair shorter by reduc-
ing the space between the
comb or fingers and the head. Comb often to
check for uneven strands, and to get rid of
trimmed hair.
Fig 1
Page 8
WARNING:
IF YOU THINK THE
POWER IS OFF WHEN
THE SWITCH IS OFF
YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and
water are a dangerous combination. But
did you know that an electric appliance is
still electrically live even if the switch is
off? If the plug is in, the power is on. So
when you are not using your appliances,
keep them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
A Public Service Ad from the Association of Home Appliance
Manufacturers and Underwriters Laboratories, Inc.
IB-9093
SERVICE CENTRE:
Conair Consumer Products Inc.
100 Conair Parkway, Woodbridge, Ontario, L4H 0L2.
©2009 Conair Consumer Products Inc.
For information on any Conair product call
1-800-472-7606 or visit us on the web at:
www.conaircanada.ca.
Consumer Call Centre E-mail :
Consumer_Canada@Conair.com
09CN12712
LIMITED FIVE YEAR WARRANTY
Conair will repair or replace (at our
option) your unit free of charge for 60 months
from the date of purchase if the appliance is
defective in workmanship or materials.
To obtain service under this warranty,
return the defective product to the
service centre listed below together with
your purchase receipt and $7.50 for
postage and handling. In the absence of a
purchase receipt, the warranty period shall be
5 years from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 60 MONTH DURATION OF THIS
WRITTEN, LIMITED WARRANTY.
IN NO EVENT SHALL CONAIR BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER.
This warranty gives you specific legal rights, and
you may also have other rights, which vary from
province to province.
Loading...