KNOW EVERYTHING ABOUT THE HAIR DESIGNER
Instruction & Styling Guide
Model 208C
STRAIGHTENS • SHINES• CONTROLS FRIZZ• HEALTHY HAIR • VOLUME
TM
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER – Any hair dryer is electrically live even when the switch is off. To reduce the risk of death or injury by
electric shock:
1. Always unplug appliance immediately after using.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other liquid.
5. If an appliance falls into water, unplug it immediately. Do not reach into the water.
WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
10. Do not use an extension cord to operate dryer.
11. Do not direct hot air toward eyes or other heat-sensitive areas.
12. Attachments may be hot during use. Allow them to cool before handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.
15. Do not use with voltage converter.
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
This appliance is intended for household use only. Use on Alternating Current (60 hertz) only. Standard Dryers are
designed to operate at 110 to 125 volts A.C.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
negatively charged ions will help to reduce static electricity, control frizzy flyaways and contribute to your hair’s
shine.
2. Keep dryer’s air intake vents unobstructed and free from hair while drying.
3. To avoid over drying, do not concentrate heat on any one section for any extended length of time. Keep dryer
moving as you style.
4. For quick touch ups, between shampoos, dampen hair with a mist of water before styling with the dryer.
5. When using your dryer to create curls and waves, dry hair almost completely on the high temperature setting,
then finish styling with Cool Shot feature to close hair shaft and lock in style.
The professional Hair Designer
™
by Conair® is very effective, even at lower temperatures, and helps to give
healthier-looking, shiny more manageable hair with maximum styling control.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
DRYER FEATURES:
1. Exceptional Power
Equipped with a powerful motor (1875 Watts) this hairdryer gives penetrating and quick drying results.
2. Tourmaline Ceramic
TM
Technology
Ion output helps smooth the cuticle layer creating silky, shiny hair.
3. Ceramic Disk and Ionic Technology
Controls static electricity and also enhances the effectiveness of leave-in hair care. It facilitates your styling and
optimizes your hair’s shine and softness. It will be easier to style and shape your hair.
4. Unique Tourmaline Ceramic
™ straightening attachment with tension control
One easy step straightening process. Dry, detangle, straighten and shine hair for professional results.
5. A Professional Concentrator Nozzle
Ultra-slim, this concentrator guarantees optimal precision in styling your hair.
6. Release Lock Buttons
Secure attachments into place and allow 360° rotation to use the right angle for styling.
7. Automatic Temperature Control
Automatically recognizes the attachment used and adjusts the temperature and airflow for perfect
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
Flocked disks add shine
Tourmaline Ceramic™
straightening plates
Detangling comb
Tension control system: 4 positions 1. Wavy hair
2. Curly hair 3. Very curly hair 4. Thick hair
Cool shot
button
2 speed/temperature
(High/Low) settings
Release lock buttons for attachments
Automatic
temperature
control
Tourmaline Ceramic™ grill,
Ceramic Disk and Ionic Technology
Hinged air filter
Professional length cord
Controls frizz,
straightens and shines
Professional
Concentrator
1875 watts
DRY, DETANGLE, STRAIGHTEN AND SHINE IN ONE STEP
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
3. Tension Control System
There are 4 fundamental kinds of hair: wavy, curly, very curly, and thick. This unique
tension control system on the straightener attachment has been developed to feature 4
settings for every hair type. Its expertise lets it give The Hair Designer
™
by Conair®
unrivalled performance thanks to this unique Tension Control System. This patentpending technology allows you to adjust the tension setting to suit each hair type for
perfect salon quality straightening results.
Wavy Hair Curly Hair Very Curly Hair Thick HairTension
Control Dial
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
2. To remove the attachment press the 2 attachment release buttons on the sides of the appliance
while gently removing the attachment.
3. Also use the release buttons when adjusting attachment angles.
HOW TO STRAIGHTEN YOUR HAIR
PREPARING YOUR HAIR
1. Carefully wash and comb out your hair.
Expert’s advice: Always start combing wet hair at the ends then slowly work your way up
towards the roots. Gentle combing prevents split ends from forming.
2. Towel dry your hair and pre dry using the Hair Designer
TM
set at the high setting, using the
concentrator if necessary. For best results, towel dry and ensure hair is not soaking wet before
using the straightening attachment.
Expert’s Advice: A: Whatever type of hair you have, start the pre-drying process by bending
at the waist, allowing your hair to fall forward to better lift the roots and give your style
volume. B: If, however, you prefer less volume, stand with your head straight to pre-dry your
hair.
A.
B.
2.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
2. Each Tourmaline Ceramic™ centre plate is then able to straighten efficiently using tension
to smooth out curls, eliminate static and control frizz.
3. The straightened hair is then given a shiny, polished finish as it passes through the flocked
disks.
HOW TO USE THE 360
O
ROTATING HEAD ATTACHMENT
To carry out the 3 steps effectively, the straightener attachment rotates 360
o
into 8 different
positions. To change the position, press the 2 attachment release lock buttons on each side of
the barrel, turn the attachment, and then release the buttons rotating the attachment until it ‘clicks’ into place. Do
not force rotation without using attachment release lock buttons.
Expert’s Advice: Ideally, the teeth of the detangling comb should be positioned facing down and used on the hair
first: by using this position hair gets detangled, is straightened and then shined for a silky, smooth, salon finish.
1.
2.
3.
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER™ BY CONAIR
®
LONG/SHOULDER LENGTH HAIR
1. Select the horizontal position for the straightener attachment.
2. Separate a section of hair about 1½" wide. Place the dryer (detangling comb facing down) at the
roots ensuring that the teeth of the detangling comb penetrate hair fully.
3. Hold ends of hair strand while straightening to keep hair taut and create tension for best results.
4. With a slight twisting motion of the wrist, turn the appliance under and slide it slowly down
the length of your hair to smooth out curls underneath strand.
5. Repeat if necessary until strand reaches the desired level of smoothness. Finish with a cool
air shot to set style.
6. For smoother hair, concentrate heat and tourmaline, ceramic, ionic technology by slowly
straightening each strand. With this new technology, results will still be faster and easier than
using a traditional brush.
Loading...