Conair 17 PIECE HC117WCSC Instructions For Care And Use

Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
If you want hair to be even shorter: A) Apply more pressure to the head with the attachment comb that is in place. This takes a little practice, of course.
OR
B) Just switch to a shorter attachment comb. Remember, it’s better to leave too much hair
than too little. For longer hair on top, use the barber comb and lift hair on the top of the head, cutting over the comb. Or hold the hair between the fin-
gers and cut to desired length. Always work­ing from the front to the back of the head, gradually cut the hair shorter by reducing the space between the comb or fingers and the head. Comb often to check for uneven strands, and to get rid of trimmed hair.
OUTLINING:
Outlining requires no attachments. Comb hair into the desired style. Position the clipper between the sideburns and the ear (see below), making sure the corner edge of the blade is against the hairline. With the outline of the hair as your guide, slowly move the clipper over, around and behind the ears. For the back of the neck
and the sideburns, hold the clipper upside down (see Fig. 1) and, holding it against the skin at the length desired, move the
clipper downward.
STOP. COMB. CHECK.
For best results, do as the professionals do: comb hair often, and check clipping results as you comb. This way you avoid uneven sides, bangs, neckline, etc.
SHORT CUTS TO PERFECT
FLAT TOPS, CREW CUTS, ETC.
Always cut from the back of the neck to the crown, using the longest comb setting. Hold the comb attachment flat against the head and slowly move the clipper up through the hair. Use the same technique for the sides, cutting from the bottom to the upper side of the head.
For the front to the crown, cut
Fig. 1
Fig. 2
les cheveux puis placer la tondeuse entre le favori et l’oreille (ill. 1). Tenir le coin de la lame contre la ligne des cheveux. Utilisant la ligne comme guide, passer la tondeuse lentement autour de l’oreille.
Page 7
Page 8
TWO YEAR LIMITED WARRANTY
Conair will repair or replace (at our option) your unit free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials.
To obtain service under this warranty, return the defective product to the service centre listed below that is nearest you, together with your purchase receipt and $7.50 for postage and handling. In the absence of a purchase receipt, the warranty period shall be 24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILI­TY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 24MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUEN­TIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.
This warranty gives you specific legal rights, and you may also have other rights, which vary from province to province.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically alive even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
Public Service ad from Association of Home Appliance
Manufacturers and Underwriters Laboratories, Inc.
WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH
IS OFF,
YOU'RE WRONG.
SERVICE CENTRE:
CONAIR CONSUMER PRODUCTS INC.
156 Parkshore Drive, Brampton, Ontario L6T 5M1 1-800-472-7606
©2004 CONAIR CONSUMER PRODUCTS INC. www.conaircanada.ca 04CN1320 IB-5562
TOUJOURS DÉBRANCHER LES
PETITS ÉLECTROMÉNAGERS
Un message d’intérêt public de l’Association of Home Appliance
Manufacturers et des Underwriters Laboratories, Inc.
156 Parkshore Drive, Brampton, Ontario L6T 5M1 1-800-472-7606
©2004 CONAIR CONSUMER PRODUCTS INC. www.conaircanada.ca 04CN1320 IB-5562
Loading...