Conair 10 piece HC90JCC Instructions For Care And Use

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially
when children are present, basic safety
precautions should always be followed, including the
following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER– Any appliance is electrically

live, even when the switch is off. To reduce the
risk of death or injury by electric shock:

1. Do not reach for an appliance that has fallen into
water. Unplug immediately.

2. Do not use while bathing or in the shower.

3. Do not place or store appliance where it can fall or
be pulled into a tub or sink. Do not place in or drop
into water or other liquid.

4. Always unplug this appliance from the electrical
outlet immediately after using.

5. Unplug this appliance before cleaning.

DO NOT REACH

INTO THE WATER

WARNING– To reduce the risk

of burns, electrocution, fire, or injury to
persons:

1. This appliance should never be left

unattended when plugged in.

2. This appliance should not be used by, on,

3. Use this appliance only for its intended

4. Never operate this appliance if it has a

repair.

5. Keep the cord away from heated surfaces.

6. Never operate the appliance with the air

7. Never drop or insert any object into any open

8. Do not use outdoors or operate where

9. Always attach plug to appliance first, then to

10. Do not place appliance on any surface while it

11. Do not use this appliance with a damaged or

12. Avoid skin contact with moving blades.

10

PIECE

Haircut Kit

Instructions for Care and Use

MODEL HC90JCC

ARRÊTER. PEIGNER. VÉRIFIER.

Pour des résultats professionnels, peigner

souvent et vérifier les résultats. On évite ainsi

les favoris inégaux, la nuque inégale, etc.

Pour couper les cheveux

plus cours :

A) Presser le peigne plus

fortement contre la tête, ce

qui demande un peu plus

Have a Question?

Please do not return this product to the retailer.

Call Us First!

Our customer service and product experts are

ready to answer ALL your questions.

Please call our TOLL-FREE customer service

number at: 1-800-472-7606

or visit us online at www.conaircanada.ca

13. When using the applianc with its cord, be mind

­ful of tangles or kinks in the cord. If the cord
does become tangled during use, turn the unit
off and straighten cord before operating again.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

This appliance is intended for house­hold use. Use on Alternating Current
120 V AC, 60 hertz only.

This appliance has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit in the outlet only one
way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper
outlet. Do not change the plug in any way. Do not
attempt to defeat this safety feature.

Your new Conair® haircut kit has everything you
need to achieve professional haircuts at home. It
features a powerful clipper, with stainless steel
blades for cutting precision. Also included are
4 attachment combs for different hair
lengths. It also comes with a barber comb,
barber scissors, cleaning brush,
lubricating oil and a blade guard for easy
maintenance of the clipper blades.

2. This appliance should not be used by, on,
or near children or individuals with certain
disabilities.

3. Use this appliance only for its intended
purpose as described in this manual. Do not
use attachments not recommended by the
manufacturer.

4. Never operate this appliance if it has a
damaged cord or plug, or if it is not working
properly, if it has been dropped or damaged, or
dropped into water. Return the appliance to a
service centre for examination and

repair.

5. Keep the cord away from heated surfaces.

6. Never operate the appliance with the air
openings blocks or while on a soft sur­face, such as a bed or couch, where the air
openings may be blocked. Keep the air
openings free of lint, hair, and the like.

7. Never drop or insert any object into any open

-

ing.

8. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.

9. Always attach plug to appliance first, then to
outlet. To disconnect, turn all controls to “OFF”
then remove plug from outlet.

10. Do not place appliance on any surface while it
is operating.

11. Do not use this appliance with a damaged or
broken comb or with teeth missing from the
blades as injury may occur.

12. Avoid skin contact with moving blades.

Poser le peigne

en le tenant par

les dents pour

GUIDE CONAIR DE COUPE

DES CHEVEUX À LA MAISON

Attach combs by
holding the teeth up,
then snapping onto
the bottom of the
clipper blade.

To remove comb at­tachments, place
index finger and
thumb as illustrated;
then pull out and up.

NOTE: Never push
or shove the clipper through the hair to make
it move more quickly. Professional experience
shows that the clipper works most efficiently
when it cuts through the hair at its own speed.

To begin cutting hair:

1. The hair should be
combed in its natural
direction.

2. Using the largest
attachment comb, trim
sides from the bottom up­wards. Hold clipper lightly

against the hair with teeth
of the attachment comb pointing upward, yet
flat against the head. Gradually lift the clipper
upward and outward through the hair,
trimming just a little at a time.

Remember, it’s better to leave too much hair than
too little. For longer hair on top, use the barber
comb and lift hair on the top of the head, cutting
over the comb. Or hold the hair between the fin­gers and cut to desired length. Always working
from the front to the back of the head, gradu-

THE CONAIR GUIDE TO CUTTING
HAIR AT HOME

Before you start:

1. Inspect your clipper. Make sure it’s free
of hair and dirt, properly oiled, and
running smoothly.

2. Place a towel or cape around the neck of the
person getting the haircut.

3. Seat the person so that his or her head is at
your eye level. This gives you greater visibility
and control.

4. First, comb hair until it’s tangle-free. Then
hold clipper in a comfortable grip. Now you’re
ready to cut.

MEDIUM TO LONG CUT

To begin with, cut only a small amount of hair
until you become used to the length each
attachment leaves the hair. Try the longest
attachment on the clipper first. If you want a
shorter cut, you can then use shorter combs.

• Short attachment comb

(number 1) cuts hair to 1/8”.

• Medium-Short attachment comb

(number 2) cuts hair to ¼”.

• Medium-Long attachment comb

(number 3) cuts hair to 3/8”.

• Long attachment comb

(number 4) cuts hair to ½”.

CONSERVER CES

2. Assurer une surveillance étroite quand il est

utilisé par, sur ou autour d’enfants ou de per-

sonnes handicapées.

STOP. COMB. CHECK.

For best results, do as the professionals do:
comb hair often, and check clipping results as
you comb. This way you avoid uneven sides,
bangs, neckline, etc.

OUTLINING:

Outlining requires no attachments. Comb
hair into the desired style. Position the clipper
between the sideburns and the ear (Fig. 1), mak­ing sure the corner edge of the blade is against
the hairline. With the outline of the hair as your
guide, slowly move the clipper over, around and
behind the ears. For the back of the neck and
the sideburns, hold the clipper upside down
(Fig. 1) and, holding it against the skin at the
length desired, move the clipper downward.

ally cut the hair shorter by
reducing the space between
the comb or fingers and the
head. Comb often to check
for uneven strands, and to
get rid of trimmed hair.

Repeat around sides and

back of head.
If you want hair to be even shorter:

A) Apply more pressure
to the head with the
attachment comb that is
in place. This takes a little
practice, of course.

OR

B) Just switch to a shorter
attachment comb.

CONSIGNES

IMPORTANTES

L’utilisation d’appareils ménagers, surtout autour

Fig 1