CompX Numeric Keypad Quick Programming Guide

Thank you for choosing eLock.

CompX eLock® is a highly engineered lock with a motor-driven latch. Its uncompromising lock
control electronics include a non-volatile memory that stores 250 user / supervisor codes and
audit trail. With optional LockView® audit trail software, CompX eLock® remembers 1500 access
attempts. Programming is simple with numeric keypad or WindowsTM based LockView® software.

NUMERIC
KEYPAD

MAGSTRIPE
CARD

MAGSTRIPE / KEYPAD
DUAL SYSTEM

PROX
READER

Quick Programming Guide

1. GETTING STARTED:

a. The unit is shipped with no user / supervisor codes
b. Press and hold until the beeping stops
c. Input the new PIN (4 digit min) and press or present new card
d. This PIN / Card is now a supervisor in slot #001

2. ADD A USER:

a. Input a valid supervisor PIN and press or present valid supervisor card
b. Press and hold until beeping stops
c. Input the new user PIN (4 digit min) and press or present new card

3. ADD A SUPERVISOR:

a. Input a valid supervisor PIN and press or present valid supervisor card
b. Press and hold until beeping stops
c. Press and hold again until beeping stops
d. Input new supervisor PIN (4 digit min) and press or present NEW supervisor card

PROX READER / KEYPAD
DUAL SYSTEM

See programming

guide included

with optional

LockView®

software for

advanced

programming

instructions.

4. DELETE A USER OR SUPERVISOR:

a. Input a valid supervisor PIN and press or present valid supervisor card
b. Press and hold until beeping stops
c. Input the PIN to be deleted and press or present existing card to be deleted

5. ADD A USER WITH A SPECIFIC SLOT ASSIGNMENT:

a. Input a valid supervisor PIN and press or present valid supervisor card
b. Press and hold until beeping stops
c. Enter slot number that will be assigned to user and press
(example: to program slot 6 type 006 )
d. Input the new user PIN (4 digit min) and press or present NEW card

6. DELETE A USER WITH A SPECIFIC SLOT ASSIGNMENT:

a. Input a valid supervisor PIN and press or present valid supervisor card
b. Press and hold until beeping stops
c. Enter slot number to be cleared and press (example: to clear slot 6 type 006 )
d. Enter slot number to be cleared again and press (example: to clear slot 6 type 006 )

1

1

CompX eLock® Accessories

AC ADAPTER

Part Numbers:

EL-2004-9VWB

(for use with the CompX eLock kit)

EL-2004-acWB

(for use with 12V electric strikes)

TORX HEAD
DRIVER FOR
FRIG KIT

(Torx head bit also available)

Part Number:

EL-dRV-15

LATCH SPLITTER

(for running up to 2 latches)

Part Number:

EL-2004-LS

MOTORIZED
LATCH*

Part Number:

EL-LaTch-3

SUPERVISOR

LATCH CABLE,

Part Number:

*

24”

EL-2004-Lc

®

HID

PROX USER,

SUPERVISOR CARD

Part Number:

EL-2004-Pc (no logo)
EL-2004-Pc-S (CSP logo)

LOCKVIEW

®

SOFTWARE KIT

(provided with 7 ft., 6-pin RJ11 cable,
1-USB dongle, 1 LockView® CD)

Part Number:

EL-LockViEW-3

RJ 11 EXTENSION
KIT, 4”

Part Number:

EL-2004-RJ kiT

MAGSTRIPE USER,
SUPERVISOR CARD

Part Number:

EL-2004-MSc (no logo)
EL-2004-MSc-S (CSP logo)

®

HID

PROX TAG

Part Number:

EL-2004-PT

2

HID is a trademark of HID Corporation. * These items are offered as Ser vice / Replacement Parts only.

TEMPLaTE on

oPPoSiTE PagE

3