Computime AEP3081 User Manual

Smart Energy In-Home Display
Instruction Manual
Model No.AEP 3081
1
CONTENTS
Usage me nu.........................................................................................................................................................7
Forecast menu.....................................................................................................................................................7
System menu........................................................................................................................................................8
Settings menu ......................................................................................................................................................9
2
PRODUCT OVERVIEW
The Computime In-Home Display unit shows yo ur current usage rate, a history of your energy usage and a forecast of your energy usage based on the data it collects. The smart ZigBee™ technology enables the unit to communicate with your utility company so you can receive messages specific to your utility and your selected consumer program.
SAFETY INSTRUCTIONS
Purpose and correct use:
Read these instructions carefully and keep in a safe place for future reference.
All manual/safety instructions and electricity supplier’s regulations must be adhered to.
Only conne ct this unit to a UL/ETL approved 5-volt DC power supply provided by manufacturer.
Do not install this unit at an altitude of over 2000 me ters (6560 ft).
This stand alone electronic unit should only be used in dry, closed living and office spaces. Do not
place the unit in a bathroom or area of excessive mo i sture. Do not a llow the uni t to g et wet.
Place the unit in an easy-to-reach posi tion where you can comfortably reach the buttons and view the screen.
Do not expose the unit to temperatures below 5°C (41°F) or above 40°C (104°F), humidity above 90% or pollution above level 2.
Do not expose the unit to voltage beyond 90V-260V AC.
Clean the unit with a dry, soft cloth. Do not use solven ts or aggressive cleaning agents.
The manufacturer accepts no responsibility for damage caused by non-observance of these instructions.
3
4 5
INSTALLATION
2 3
1. Plug the power adapter into the adapter socket on the left-hand side of the unit.
2. Pull out the table stand on the back of the unit and place the unit on a firm, flat surface near a po wer source.
3. Insert the plug into a 120 or 220 V wall socket.
BACKLIGHT
Press any button to turn on the backlight. Note: If the backlight has turned off, you need to press any button to turn it on again before you can enter the
menus.
NAVIGATION BUTTONS
The navigation buttons are as follows:
1
4
Throughout this manual, the buttons to press in order to access the onscreen commands will be referred to as (1), (2 ), (3), ( 4).
Loading...
+ 10 hidden pages