VGA UTP Extender 1X8 Splitter with Audio
１
USER MANUAL
Table of Contents
1.0 Introduction……………………………………………………..2
2.0 Specifications…………………………………….………..……2
3.0 Package Contents………………………………………….…..3
4.0 Panel Descriptions…………………………………….…….…4
5.0 Connection and Operation..................................................5
CVE-TRX08A
C a b le a n d C o n n ecti vity C ompa n y
VGA UTP Extender 1X8 Splitter with Audio
２
VGA UTP Extender 1X8 Splitter with
Audio
Dear Customer
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.
1.0 Introduction
This VGA UTP Extender 1X8 Splitter with Audio is an ideal device for local
displaying and remote viewing. It combines split function and extension function. It
distributes the input of the VGA signal and audio signal into the eight identical
outputs simultaneously. Each receiver by Cat5 x1 works with the Sender as a full
functional module by receiving the distributed signal from the sender and
transmitting to displays individually. Only by the most inexpensive UTP cable with
cross stand inside, the full functional
module extend the VGA display max up to
300 meters.
It offers solutions for VGA retail and show site and Projector factory, noise space
and security concerns, data center control, information distribution, conference
room presentation, school and corporate training environments.
1.1 FEATURES
This device has many features that enable it to perform in a superior manner.
Among those features you will find:
Extends VGA video and stereo audio signal max up to 300m over one UTP
cable with cross stand inside.
Adjusting GAIN and PEAK to adapt for the different length of UTP cable.
GAIN: Brightness adjustment.
PEAK: Skew adjustment.
Supports resolution max up to 1920x1200.
Dual output at local unit: 1 x VGA output for local site, plus 8 x UTP output for
remote site.
Works with monitors, projectors, HDTV, and flat panels.
2.0 SPECIFICATIONS
Input /Output Connector
oiduA oeretS ,)nip51 elameF(AGV rotcennoc tupnI
Output connector VGA(Female 15pin),
Stereo Audio,8xRJ45
Operating Frequency
Vertical Frequency Range 60/75/85Hz
VGA UTP Extender 1X8 Splitter with Audio
３
Resolutions(PC)
640X480
800X600
1024X768
1280X720
1280X768
1280X960
1280X1024
1600X900
1600X1200
1920X1080
1920X1200
Mechanical
Size of VGA UTP Extender 1X8
Splitter
266×115×32mm
Weight of VGA UTP Extender 1X8
Splitter
840g
Size of Receiver (L-W-H)
81.5×43×23MM
Weight of Receiver (Net) 108g
Warranty
Limited Warranty 2 Years Parts and Labor
Environmental
Operating Temperature
0℃ to +70℃
Operating Humidity 10% to 85 % RH (no condensation)
Storage Temperature
-10℃ to +80℃
Storage Humidity 5% to 90 % RH (no condensation)
Power Requirement
Power Supply for VGA UTP Extender
1X8 Splitter
5V@4A, max 15W
Power Supply for Receiver 5V@2A, max 5W
Regulatory Approvals
LU,EC,CCF tinU retrevnoC
CCF,EC,LU ylppuS rewoP
Accessories Adapter
AC Power Adapter US standard, UK standard and so on
noisreV hsilgnE launaM resU
Note: Specifications are subject to change without notice.
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1) VGA UTP Extender 1X8 Splitter
VGA UTP Extender 1X8 Splitter with Audio
４
2) User’s Manual
3) Several Receivers (Depending upon the requirement of customers)
4) One piece of 5V@4A DC Power Supply for VGA UTP Extender 1X5 Splitter
Several pieces of 5V@2A Power Supply for Receivers
4.0 PANEL DESCRIPTIONS
DC/5V
15
10
5
11
6
1
VGA Output
1
6
11
5
10
15
VGA Input
Audio Out
Audio In
Power
VGA UTP Extender
With Audio
VGA UTP Extender 1X8 Splitter with Audio
５
5.0 CONNECTION AND OPERATION
1) Connect the single VGA source to the main VGA input using a piece of VGA
cable.
2) Connect VGA output of the Sender to a local display and Audio output of the
Sender to a local Sounder
3) Connect Sender and each Receiver using a piece of each pieces of CAT-5e/6
4) Connect VGA outputs of Receivers to remote displays and Audio output of
Receivers to remote sounders.
5) Plug the 5V@ 4A power supply into the VGA UTP 1X8 Splitter and 5V@2A
power suppliers to each Receiver individually.
Attention: Insert / Extract cable gently.
5.1 CONNECTION DIAGRAM
55 Ruta Ct. South Hackensack, NJ 07606
Toll Free: 800 526-0242
Email:
sales@comprehensivecable.com
customerservice@comprehensivecable.com
www.comprehensivecable.com
Loading...