CP-HDACPR10
HD Audio Center
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Comprehensive Cable assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Comprehensive Cable assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Comprehensive Cable reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Comprehensive Cable .
© Copyright 2011 by Comprehensive Cable.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
electrical shock and injury to persons.
•
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 01/07/11 Preliminary Release
RDV2 16/01/12
VS0 13/08/12 Updated format/diagrams
RDV3 17/08/12 OLED Menu
RDV4 21/11/12 Revised features list
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................1
4. System Requirements ............................ 2
5. Features .................................................. 2
6. Operation Controls and Functions ....... 4
6.1 Front Panel ........................................4
6.2 Rear Panel .........................................5
6.3 Top Panel ..........................................6
6.4 Remote Control ................................6
6.5 OLED Menu .......................................7
7. Connection Diagram ............................ 8
........................................9
9. Acronyms ............................................. 10
1
1. INTRODUCTION
The HD Audio Center is designed to allow multiple audio sources to
be controlled, switched and output to a variety of audio equipment.
With its 6 audio inputs (including an HDMI input) and 6 audio outputs
(including a 6.3mm headphone output) you can integrate and
active speakers.
This device has an built-in sampling rate converter which can
upscale audio signals between 44.1 kHz to 192 kHz (24-bit). With HDMI
connectivity, it allows the user to embed or de-embed audio within
the HDMI signal path.
noise Professional Balanced output) and 6.3mm headphone jack (3.5
mini-jack adaptor supplied) offer unparalleled audio quality. With a
highly accurate PLL and low jitter reduction clock system, and with an
OLED display and IR remote for controlling the device the HD Audio
Center is an incredibly useful tool for getting the most out of your
audio devices.
2. APPLICATIONS
• Multiple input/output Audio Center
• Audio format and sampling rate conversion
• Professional audio system integration with XLR balanced outputs
• Mac/PC USB audio output support
• Analog to digital or digital to analog audio conversion
• HDMI audio embedding or de-embedding
3. PACKAGE CONTENTS
• 1×HD Audio Center
• 1×Remote Control (with battery)
• 1×6.3mm to 3.5mm Headphone Adaptor
• 1×Software CD
• 1×5 V/3 A DC Power Adaptor
• Operation Manual
2
4. SYSTEM REQUIREMENTS
Input source equipment such as PC (USB) or DVD player with relevant
headphones
5. FEATURES
Main
• 6 Input, 6 Output HD Audio Center
• 4 Digital Inputs, 2 Analog Inputs
• 3 Digital Outputs, 2 Analog Outputs and Headphone Output
• Full system control from IR remote or main control dial via OLED
display.
Digital
• HDMI, USB, Optical and Coaxial digital audio inputs support LPCM
stereo
• HDMI input supports LPCM stereo in all modes but can pass surround
sound signal whilst in bypass mode
• All digital inputs support 192kHz sampling rate at up to 24-bit
resolution
• HDMI, Optical and Coaxial digital outputs
• All digital inputs can be SRC (Sample Rate Conversion) to 44.1, 48,
88.2, 96, 176.4 and 192 kHz via DSP Engine (Digital Signal Processing)
• Highly accurate PLL and low jitter reduction clock system
• HDMI Audio output (video is always bypassed to HDMI output) can
either output the incoming HDMI (HDMI Bypass Mode) or embed
the selected audio signal (HDMI Input Mode)
Analog
•
• Professional XLR balanced stereo output
• RCA analog stereo output
• RCA analog stereo input
• Mini-jack (3.5mm) stereo input
• Total Harmonic Distortion (THD): Less than 100dB (−20dBFS)
• Analog inputs provide digital output sampling rates up to 192 kHz
3
Misc
• IR Remote with direct source, power and mute buttons
• HDMI audio embedding or de-embedding
• Volume control of analog and headphone outputs or just
headphone output via remote or main control dial
• Direct power and mute button on unit
• High viewing angle OLED display
• Headphone output fades in after system is muted
• 6.3mm headphone output (3.5mm mini-jack adaptor supplied)
4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
MENUMENU
1 2 3 4 5
1
6.3mm Headphone Output: Connect to 6.3mm professional
headphone set for user to enjoy the individual professional audio
sound.
2
3.5mm Front Input: Connect 3.5mm mini-jack cable to any audio
equipment for stereo input audio signal.
3
IR: IR receiver window. Accepts the IR signal from the supplied
remote control.
4
OLED: Displays the input/output selection, volume setting, sampling
rate and audio channels.
A B
C D
A. Input source
B. Headphone or analog line level volume or system mute
C. Input sampling rate
D. Output sampling rate
5
MENU/VOLUME Controller: Turn to adjust the volume. Press inwards
to enter into the menu and turn it to select the desire setting, press
Note: The Volume and Mute functions only affect the headphone
and analog line-out volume levels, all other outputs are not
affected.
5
6.2 Rear Panel
DC 5V
HDMI IN
HDMI OUT
USB
OUT
COAX.
OPT.
IN
IN
L
R
OUT
R
XLR OUT XLR OUT
L
DC 5V
USB
OUT
COAX.
OPT.
IN
IN
L
R
OUT
R
XLR OUT XLR OUT
L
HDMI IN
HDMI OUT
1 2 3 5
4
6 7
1
DC 5V: Plug the 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
2
HDMI IN/OUT: Connect to an HDMI source such as a satellite box
or DVD Audio player and output to an HDMI HDTV/AV Receiver for
display output.
3
USB: Connect to a PC/MAC source for USB audio signal input.
4
COAX OUT/IN: Connect the COAX IN to a coaxial digital audio
input source such as set-top box or CD player and the COAX OUT
5
OPT. OUT/IN: Connect the OPT. IN to an optical digital audio input
source such as a DVD/CD player or PS3 and the OPT. OUT to an
6
L/R IN/OUT: Connect the L/R IN to an analog stereo input source
or active speakers with RCA jack cables.
7
XLR L/R OUT:
directly to professional balanced equipment with XLR cables.
Note:
HDMI Input Mode: In this mode, whatever audio input is selected
will be routed to the HDMI output as well as all other outputs.
HDMI Bypass Mode: In this mode HDMI video and audio will always
be routed to the HDMI output no matter what input is selected,
whilst all other outputs will output the audio from the selected
input. This function allows the user to have two distinct audio
pathways through the unit.
6
6.3 Top Panel
POWER
MUTE
1 2
1
POWER: Press this button to switch on the device or set to standby
mode.
2
MUTE: Press this button to mute or unmute the audio volume
instantly.
6.4 Remote Control
1
POWER: Press the button to turn On or
to set the device to standby mode.
2
MUTE: Press the button to mute or
unmute the audio volume instantly.
3
VOL: Press these buttons to turn up or
down on the output audio volume.
4
MENU: Press the button to enter into the
menu selections then press the volume
up/down buttons to select and press it
5
RETURN: Press the button to return or
exit the menu selection.
6
INPUT: Press these hot keys to switch the input sources instantly.
1
3
6
5
4
2
7
1ST LAYER FULL NAME 2ND LAYER
Source In Source Selection HDMI In
USB In
Optical In
Coaxial In
Line In (L/R In)
Front In
Return
SRC Set Sampling Rate Conversion Setup Bypass
192 kHz
176.4 kHz
96 kHz
88.2 kHz
48 kHz
44.1 kHz
Return
HDMI TX Set HDMI Output Setup Bypass
Input
Return
Display Set Display Time Out Setup TimeOut 5s
TimeOut 10s
TimeOut 15s
Return
HP Impedance Headphone Impedance 16 Ω
32 Ω
64 Ω
200 Ω
300 Ω
600 Ω
Return
Line Out Set Headphone/Line Out Setup Fix Level
Volume Level
Return
Reset to Default OK
Return
Return
8
7. CONNECTION DIAGRAM
MENUMENU
Smartphone or
MP3 Player
Headphones
Headphone
Output
Line-level
Input
FRONT
DC 5V
HDMI IN
HDMI OUT
USB
OUT
COAX.
OPT.
IN
IN
L
R
OUT
R
XLR OUT XLR OUT
L
DC 5V
USB
OUT
COAX.
OPT.
IN
IN
L
R
OUT
R
XLR OUT XLR OUT
L
HDMI IN
HDMI OUT
Digital
Audio
Output
Display
Mac PC
Set-top Box CD Player
AV Receiver
or
DVD/CD Player Active
Speakers
HDMI Output
HDMI
Input
XLR
Balanced
Output
REAR
Stereo
Analog
Input
Stereo
Analog
Output
Digital Audio Input
USB
Input
Power
Supply
9
8. SPECIFICATIONS
Input Ports 1×HDMI, 1×USB, 1×Coaxial,
1×Optical, 1×L/R,
1×Mini-jack in (L/R)
Output Ports 1×HDMI, 1×Coaxial, 1×Optical,
1×L/R, 1×L/R Balanced XLR,
1×6.3mm Headphone jack
Digital Audio I/O Support LPCM 2CH
Stereo Audio I/O Level 2 Vrms ±0.2
XLR Blanced I/O Level 4 Vrms ±0.2
Headphone Impedance 16 Ω ~ 600 Ω
ESD Protection Human body model:
±8 kV (air-gap discharge)
±6 kV(contact discharge)
Power Supply 5 V/3 A DC (US/EU standards, CE/FCC/
Dimensions 138 mm (W)×223 mm (D)×50 mm (H)
Weight 680 g
Chassis Material Aluminum
Silkscreen Color Black
Power Consumption 15 W
9. ACRONYMS
ACRONYM COMPLETE TERM
COAX Coaxial
HD
HDMI
OPT Optical
Loading...