
HDMI Audio Splitter/De-embedder
CP-HDA2 HDMI Audio Splitter/De-embedder
User Manual
Please read this manual carefully before using this product.

HDMI Audio Splitter/De-embedder
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment
and before connecting the power supply.
Please keep the following in mind as you unpack and install this equipment:
• Always follow basic safety precaution to reduce the risk of fire, electrical shock and injury
to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into thi s product throug h any openings or em pty slots in
the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damage d.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon
it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit
housing that provide ventilation and allow for sufficient space for air circulate around the
unit.

HDMI Audio Splitter/De-embedder
Table of Contents
1. Introduction ........................................................................................................................................ 4
2. Features ............................................................................................................................................ 4
3. Specification ...................................................................................................................................... 4
4. System Diagram
................................................................................................................................ 5

HDMI Audio Splitter/De-embedder
Introduction
CP-HDA2 is a high-quality HDMI audio splitter/de-embedder, with 1 HDMI and 1 split stereo audio
output, HDCP compliant and HDTV compatible.
The antistatic case design of CP-HDA2 provides good protection for stable performance, and its
transmission resolution ups to 1920*1200@60Hz.
1. Features
De-embed and split the HDMI audio to two different formats output.
Built-in HDCP internal management, HDMI 1.3.
HDTV compatible with High Definition Transmission up to 1920*1200@60Hz resolution (max).
Bandwidth: 340 MHz (10.2 Gbit/s).
Wall/table-mountable aluminium enclosure, PT case design.
Antistatic case design: providing good protection for long-term and stable performance
2. Specification
Video Input
Input 1 HDMI Output
Input Connector HDMI 1.3 Output Connector
Input Level T.M.D.S. 2.9V/3.3V Output Level T.M.D.S. 2.9V/3.3V
Input Impedence 50Ω Output Impedence 50Ω
Video General
Gain 0 dB Bandwidth 340 MHz (10.2 Gbit/s)
Video Signal HDMI 1.3 Maximum Pixel Clock 165MHz
Resolution Range
Consumer
Electronics
Control (CEC)
HDCP
Management
Audio General
Frequency
Response
SNR >80dB Bandwidth 20Hz ~ 25KHz
Separation
General
Power Supply 100VAC ~ 240VAC, 50/60Hz Power Consumption 3W
Video Output
1 HDMI
1 Stereo Audio
HDMI 1.3
3.5mm jack
Up to 1920 x 1200 or
1080P@60Hz
Supports CEC wired infrared data pass-through using the HDMI 1.3 standard
Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and
HDMI 1.3 standards.
20Hz ~ 20KHz CMRR >70dB@20Hz~20KHz
>75dB@20Hz ~ 20KHz THD + Noise
Delay Time 5nS (±1nS)
1%@1KHz,
0.3%@20KHz
Temperature
Case Dimension W52.5 x L92 x H28 mm Product Weight 0.2Kg
-20 ~ +70℃
Humidity 10% ~ 90%

HDMI Audio Splitter/De-embedder
3. System Diagram