Comprehensive CDA-VGA102A User Manual

VGA SPLITTER 1× 2 with audio

CDA-VGA102A

USER MANUAL

Table of Contents

1.0 Introduction……………………………………………………..2

2.0 Specifications…………………………………….………..……2

3.0 Package Contents………………………………………… .…..3

4.0 Panel Descriptions…………………………………….…….…3

5.0 Connection and Operation..................................................3

Cable and Connectivity Company

１

VGA SPLITTER 1× 2 with audio

Signal Inputs/Output

Input video Signal

1.2 volts p-p

Maximum Single Link Range

1920X1200,1080p

Operating Frequency

Vertical Frequency Range

30-170 Hz

Video Amplifier Bandwidth

500MHz

Input/Output connector

Input

VGA 15pin male

Output

VGA 15pin female

Mechanical

Size(L-W-H)

120x71x24.5mm

Weight(Net)

250g

Warranty

Limited Warranty

2 Years Parts and Labor

Environmental

VGA SPLITTER 1× 2 with audio

Dear Customer

Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.

1.0 INTRODUCTION

This product is an VGA splitter 1x2 with audio. It distributes the input of the VGA
signal and stereo audio signal into the two identical outputs simultaneously.This
product has the ability of bufferin
can achieve long distance transmission of VGA signal of more than 15 meters.
This VGA Splitter offers solutions for monitors or projectors retail and show site,
and Projector factory, noise, space and security concerns, data center control,
information distribution, conference room presentation, school and corporate
training environments.

1.1 FEATURES

This VGA Splitter has many features that enable it to perform in a superior
manner. Among those features you will find:

 Easy to Use: Install in seconds, no need of setting.
 Connects VGA source to two VGA displays at the time.
 Connects stereo audio source to two audio receivers at the time.
 Supports highest video resolution up to 1920 x 1200 and 1080p
 Supports highest video Amplifier Bandwidth to 500MHz

2.0 SPECIFICATIONS

g and amplifying. Each amplifier splitter’s output

２