Com-Power AL-100 User Manual

Features
Broadband - 300 MHz - 1000 MHz
Transmitting and Receiving Applications
Individual Calibration
Three Year W arranty
Log Periodic Antenna
AL-100
Description
The Log Periodic antenna Model AL-100 is a broad­band antenna for use in the 300-1000 MHz frequency band. This antenna can be used for EMC emissions measurements and also for immunity testing. The antenna is constructed with light weight aluminum with corrosion resistant conductive coating.
Each antenna is individually calibrated. The calibra­tion data is provided with each antenna to maximize measurement accuracy . The AL-100 can transmit up to 50 W of continuous power for transmit applications.
The fi ber glass mounting base allows the antenna to be mounted in vertical or horizontal polarizations. The mounting base also has a 1/4 inch x 20 threads. This enables the antenna to be attached to an antenna tripod such as model AT-100 tripod.
The AL-100 can also be mounted on an antenna mast. The antenna has a two year warranty.
Application
The AL-100 Log Periodic antenna is used for emission and immunity testing to verify compliance for FCC, CE and MIL-STD 461 specifi cations.
Log Periodic antennas allow quick sweep measure­ments without a band break. This feature makes it convenient to use the Log Periodic antenna with a automated emissions or immunity measurement sys­tem. The size of the antenna also allows it to be used in a small area like a shield room.
The Log Periodic antenna was designed to get a smooth response curve for the antenna factors to minimize measurement errors.
The calibration data provided with each antenna is used to calculate fi eld strength measured for the se- lected frequency. The antenna factor (dB/m) for the selected frequency is added to the measured output (dBV) displayed by the EMI meter to obtain fi eld strength (dBV/m).
Com-Power Corporation (714) 528-8800 www. com-power.com sales@com-power.com
Specifi cations
Frequency Range: 300 MHz - 1000 MHz C
ontinuous input power (CW): 50 Watts Polarization: Linear Impedance: 50 Ω Connector: BNC (f) Width: 22 in / 55.8 cm Length: 37 in / 93.9 cm Weight: 4 lbs / 1.8 kg
T ypical Antenna Factor:
Mechanical Outline:
All values are typical, unless specifi ed. All specifi cations are subject ot change without notice.
Com-Power Corporation 114 Olinda Drive, Brea, CA 92823 (714) 528 - 8800 www.com-power.com
Loading...