Component Hardware W85-1000 User Manual

®

™

HOLES FOR #10 SCREWS

4" NOMINAL

2-1/4”

5-1/4”

4-9/16”

5-7/8”

1-7/8”

1-5/8”

9/16”

(57mm)

(41mm)

(133mm)

(149mm)

(14mm)

(47mm)

(116mm)

(93mm) to (106mm)

(3-21/32” to 4-5/32”)

Economical & Energy Efficient!

Horizontal Vent Port

Material: UL Recognized Thermoplastic

Finish: Matte Gray

Screen: Stainless Steel

Wire Leads: Type SJ–13" long

Mounting Holes: Drilled & Countersunk for #10 Screws

Cut-out Opening: 4-9/16" x 1-7/8"

Electrical: 120V/9 Watts

U.L. FILE #E73857

Model No.

W85-1000

u Narrow prole permits mounng of the vent port in

the door jamb above the door

u Silicone Flaps are used to equalize the atmosphere

pressure in walk-in coolers and freezers

u Reliable Resistor Heang Technology prevents aps

from freezing

u Reduces the eort required to open refrigerator doors

u Housing is constructed of rugged grey ABS plasc

u Polyropylene housing is UL ame retardant rated 94-5VA

u Red indicator light warns if unit stops funconing

u Two part construcon permits use on door widths from

3-5/8" to 4-1/4"

u Economical

u Energy Ecient

1890 Swarthmore Avenue, PO Box 2020, Lakewood, NJ 08701 • Tel. [phone] • 732-363-4700 • Fax. [phone]

Component Hardware Group, Inc. (CHG)

www.componenthardware.com