Component Hardware SS20-2000 User Manual

SPECIFIER ITEM NO. ________________

®

3-7/8”

(97mm)

2-5/8”

(68mm)

1/2” NPT FEMALE
THREAD INLET

CHG PART NO. _______________________

SaniShower™ – Plastic Shower Head

SS20 - 2000

ENGINEERING SPECIFICATION:

Chrome plated ABS shower head has an adjustable swivel

joint head with a full spray pattern that has a ow rate of 2.0 GPM
at 60 PSI. The shower head and spray nozzles are treated with
SANIGUARD®.

TECHNICAL/PERFORMANCE SPECIFICATIONS:

Full Spray Shower Head

½” NPT Female Inlet
Max 2.0 GPM @ 60 PSI
SANIGUARD® treated plastic

Dimensions shown in inches (mm) are for reference only and are subject to change.

SANIGUARD® is not a substitute for good hygiene and cleaning practices and will not protect the user from foodborne illness or disease.

1890 Swarthmore Avenue, PO Box 2020, Lakewood,New Jersey 08701 Phone: [phone], Fax: [phone]

www.chgusa.com