Component Hardware S10-0014 Installation Manual

MOUNTING INSTRUCTIONS FOR

S26/S10 SERIES FULL EXTENSION DRAWER SLIDES

INSTALLATION INSTRUCTIONS

LENGTH OF DRAWER

“X”

DRAWER

BEARINGS

1/2 “X” - 11/16”

(17.4mm)

(22.2mm)

7/8”

1/2 “X” - 11/16”

(17.4mm)

1-13/16”

(46mm)

CABINET

1-27/32”

(46.8mm)

CABINET

BEARINGS

1/64”

(.4mm)

5/8”

(15.8mm)

SECTION

5/64”

(.2mm)

7/8”

(22.2mm)

DRAWER

17/32”

(13.5mm)

1-7/16” MIN

(36mm)

These instructions serve as a general guide for the installation of S26 and S10 Series Full Extension Drawer Slides.

The location of bearings can be modied to suit your specic application.

NOTE: If self-closing drawers are required, position the rear bearings lower than the front bearings.

®

1890 Swarthmore Ave. PO Box 2020, Lakewood, NJ 08701• Phone [phone] • Fax [phone] • www.componenthardware.com

S26-X039