Component Hardware KN88-8101-SE4, KN88-8101-SC4 User Manual

SPECIFIER ITEM NO. ________________
®
THE POWER OF SIL V ER
CHG PART NO. _______________________
Widespread Faucet with 8-1/2” Swivel Gooseneck Spout, Side Sprayer and 4” Wrist Handles
KN88 - 8101 - S__4
ENGINEERING SPECIFICATION:
Polished chrome-plated cast brass widespread faucet with adjustable inlet centers from 5” (127mm) to 24” (610mm), an 8-1/2” (216mm) swivel gooseneck spout and quarter turn ceramic disc cartridges with inline check valves. Color-coded 4” wrist handles, with SANIGUARD® treatment, mounting hardware and 1/2” (13mm) NPSM coupling nuts
®
for standard lavatory risers. Deck mounted spray head with 48” vinyl, nylon reinforced hose included.
CUS
NSF 61/9
ADA
TECHNICAL/PERFORMANCE SPECIFICATIONS:
Commercial Specication Grade
Gaskets and Seals Rated Commercial Hot 180°F 1/2” NPS Male Inlets w/1/2” tube compression seals & nuts 1/4 Turn ceramic disc cartridge valves w/inline check valves Operating Temperature: 40 - 180°F Operating Pressure: 15 - 125psi
Part Numbers:
1890 Swarthmore Avenue, PO Box 2020, Lakewood,New Jersey 08701 Phone: 800-526-3694, 732-363-4700, Fax: 732-364-8110
KN88 - 8101 - S__4
Outlet
A 0.5 GPM PCA Spray, Vandal Resistant B 1.5 GPM Max Laminar Vandal Resistant C 0.5 GPM PCA Spray D 1.5 GPM Max Laminar F 2.2 GPM Max Aerator, Vandal Resistant H 2.2 GPM 2.2 GPM Aerated stream, vandal resistant & hose proof S 6.0 GPM Wide Rose Spray
www.chgusa.com
SPECIFIER ITEM NO. ________________
®
(16mm)
3/16"
(5mm)
(38mm)
- 1-1/2" DIA.
(38mm)
- 1-1/2" DIA.
(22mm)
(32mm)
7/8" DIA.
1-1/4" DIA.
AS REQUIRED
8-1/2”
(216mm)
6-1/4”
(161mm)
11-3/4”
(300mm)
5” to 24”
ADJUSTABLE
(127mm-610mm)
1-1/4”
(328mm)
5/8”
AS REQUIRED
4-1/16”
(103mm)
4-1/2”
(114mm)
2-1/16
(52mm)
4-9/16
(116mm)
CHG PART NO. _______________________
Dimensions shown in inches (mm) are for reference only and are subject to change.
1890 Swarthmore Avenue, PO Box 2020, Lakewood,New Jersey 08701 Phone: 800-526-3694, 732-363-4700, Fax: 732-364-8110
www.chgusa.com
Loading...